130,507 used machines on RESALE, but how to find them? Machine Search
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027.
Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices
Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.
Milling machine Manufacturer: Quaser Type: MV 184P/12B Year of manufacture: 2011
Milling machine DMG DMU 100t BJ 2003 more technical data and more pictures on request
Milling machine Hurco VMX24 • Travel (X/Y/Z): 610 mm / 510 mm / 610 mm. • Table size: Approx. 760 x 510 mm. • Tool holder: SK40. • Tool changer: 24 places (side-mounted). • Spindle speed: Up to 12,000 rpm • Rapid traverse: Approx. 30-35 m/min (X/Y/Z). • Control: Hurco WinMax 6 1 shift operation May 2018 new spindle from 15,000 to 12,000 Replacement Monitor 30 cm Torisan TM121SV-02L01 LCD TFT available (subject to functionality) without tools and vices Perforated plate included
A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.
Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.
1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor
Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.
A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.
CNC lathe Type: GLS-2800 Y Manufacturer: Goodway Year: 2021 Control: Fanuc Series Oi-TF Plus Working hours: 2564 Max turning diameter: 400 mm Max circulating diameter: 760 mm Max turning length: 680 mm Max spindle passage: 75 mm X: 250 mm Z: 750 mm Y: +-50 mm C-axis Rapid traverses X/Z/Y: 30/30/12 m/min Spindle motor power: 15 / 18.5 kW Max spindle speed (2 speed): 0–875 / 0–3500 rpm⁻¹ Turret power for powered holders: 3.7 / 5.5 kW (30 min) Max speed of driven holders: 6000rpm Performance of servomotors for X/Z/Y axes: 2.7 / 2.7 / 2.7 kW Cooling pump motor power: 0.5 kW Maximum torque on MK spindle: 527 / 757 (30 min) N·m Maximum torque of driven brackets: 35 N·m (15 min, 1500 rpm) Range of recommended clamping pressures for clamping: 0.35 MPa – 3 MPa Machine weight: 6000 kg Dimensions: 3230 × 2100 × 2252 mm Tailstock Chip conveyor Machine in very ...
CNC portal milling machine Droop & Rein FP160/2 – technically perfect, dismantled Description: For sale is a Droop & Rein FP160/2 CNC portal milling machine, built in 1965, completely overhauled and converted to CNC by the Rottler company in 2003 (investment at the time: €750,000). The machine is equipped with a Heidenhain TNC 430 control system and a Heidenhain LB 382 C length measuring system and guarantees a high precision of ±0.005 mm. All components are technically flawless. The machine is currently dismantled and disassembled in our warehouse in Riesa, Germany, so that assembly, assembly and adjustment are required before commissioning. A viewing of the individual parts is possible. Technical data: Manufacturer: Droop & Rein Type: FP160/2 Item no.: 2698 Year of construction: 1965 (CNC conversion 2003) Control: Heidenhain TNC 430 Length measuring ...
Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.
A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible.
5-axis CNC machining center Type: UMC-750 Manufacturer: Haas Year: 2020 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine 30+1 positions Spindel taper: ISO 40 Max spindle speed: 12000 rpm Chip conveyor Machine in good condition, under power. Find more here - / Contact us at -
Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible.
Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.
A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible.
A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.
used
Compressive force: 60 t Large working width: 2550 mm Clear stand width: 2550 mm for sheet metal (at full working width) up to: Column projection: 250 mm Bending speed: 75 mm/s Return stroke speed: 95 mm/s Back gauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Space requirement: 2920 x 1350 x 2250 mm Weight: 4.7 t Control CYBELEC
A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.
A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible.
A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.
Key data: 800 mm, 510 mm, 550 mm
Universal Machining Center Manufacturer: Reiden Type BF1 Year of manufacture 1997 Control Heidenhain tnc 407 Travel X/Y/Z 800/510/550 Clamping surface D 630mm Table load 800kg max. speed 3100rpm 24 Way Tool Changer Tool holder SK40 Chip conveyor Monitor new, central lubrication new, rotary encoder rotary table new, glass scale X-axis new. The machine is 100% functional, ready for immediate use. For more information, I am always available at 01778957069.
Key data: 750 mm, 650 mm, 560 mm
Universal CNC Machining Center Manufacturer: DMG Mori Type DMU75 Monoblock Year of manufacture 2014 IBN 2015 Control Heidenhain iTNC530 Control a 23.075h Engine a 22.287h Program run 12.946h Operating hours 12.891h Travels X/Y/Z 750/650/560mm Table size 800 x 650mm Table load 600kg C-axis b-axis -120° + 120° Tool holder HSK63 60 Compartment Tool Magazine IKZ 40bar Blum Wireless Push Button Electronic Handwheel HR410 Belt filter system 500l Motor power 35kW Torque 130/86/0 Machine is in a used very good condition. Geometrically very good. Without vice, without tool holders
Key data: 3075 mm, 1545 mm
Technical data – machine • Manufacturer: BALLIU nv (Belgium) • Machine type: MINOTAUR • Year of construction: 2014 • Machine type: CO₂ laser cutting machine (portal) • Working area: Large format flatbed (4XL) • Control: BALLIU / Industrial Control • Power supply: 3× 400 V / 50–60 Hz • CE compliant ⸻ Technical data – laser source • Laser manufacturer: ROFIN-SINAR Laser GmbH (Germany) • Type: DC 025 • Laser type: CO₂ laser, diffusion-cooled • Laser power: approx. 250 W • Cooling: Water cooling • Weight laser: approx. 545 kg • Standards: CE / CDRH / DLR license
A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available. ...
AJAN SHP 260 plasma-gas cutting machine was built in 2015 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd Şti. The machine, distinguished by its high efficiency, is an excellent choice for thermal cutting of sheet metal. The machining process is performed by means of reliable torches, located on two separate gantries. This solution, combined with the large surface area of the work table, enables the machining of more than one sheet at a time with different cutting methods. The AJAN plasma-gas cutting machine is offered with equipment that includes, among others, a HYPERTHERM plasma source of the highest energy efficiency, exhaust extraction and a track. The total weight of the machine is 520 kg. Technical specifications of the AJAN SHP 260 plasma-gas cutting machine - CNC controller: AJAN - working table dimensions (L x W): 16000 x 3000 mm - plasma source: HYPERTHERM - plasm ...
Key data: 400 mm, 375 mm, 250 mm
With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.
This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information.
This 3-axis COMEC MD JAM CNC Wood Machining Centre was manufactured in 2024. Consider the opportunity to buy this COMEC MD JAM CNC Wood Machining Centre. Contact us for more information.
This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.
This IMA BIMA 300 was manufactured in 2008. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.
This 4-axis BIESSE Rover C6 was manufactured in 2011. Ideal for diverse woodworking tasks, it offers precision and versatility. Consider the opportunity to buy this BIESSE Rover C6 CNC Wood Machining Centre. Contact us for more information.
This IMA BIMA P480V 180/480 was manufactured in 2001. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.
This 3-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 1999. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information.
STIGAL VXstandard plasma cutting machine was built in 2020 in Poland by STIGAL Marcin Stępień. The machine, distinguished by its exceptional precision, is the perfect choice for thermal cutting of workpieces with a maximum thickness of 20 mm. The machining process is performed on a stable work table, whose open design offers free access to the workspace from all sides. The dust and gas extraction system (ECTS), which is integrated into the worktable, effectively removes contaminants generated during machining, providing a comfortable work environment. This is all complemented by a touchscreen operator panel with CNC control. The STIGAL VX-standard plasma cutting machine is offered with a reliable CEBORA plasma source of the highest energy efficiency. Technical specifications of STIGAL VXstandard plasma cutting machine - touchscreen operator panel with CNC controller - maximum shee ...
Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm
Stock number: 4022 CNC BED MILLING MACHINE Manufacturer: Ibarmia, Type: ZVH 58LL Machines NO.: 05525, Year of manufacture: 2005 Specifications: Table size 3600x1050 mm Longitudinal movement (X) 3000 mm Transverse movement (Z) 860 mm Vertical movement (Y) 1000 mm Spindle Taper SK50 ISO Spindle speeds 9000 rpm Spindle motor power 25 Kw Tool changer 30 stations Control Heidenhain TNC 530 Fabr. Controlled in 5 Axis Spindle Hours 12060 Hours Accessories: Cooling by spindle 24 bar Chip conveyance. Cooling water system. Electronic handwheel Cloth Probe System Rotary table. 800mm Table rotation (B) 0.001 degrees Very well preserved. Length: 8100mm, Height: 3800mm, Width: 5500mm, Weight: 25400 kg
Key data: 2700 mm, 2200 mm, 1050 mm
CNC travelling column machining centre from the manufacturer MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for the precise and heavy-duty machining of large-format workpieces. The machine is designed in a classic travelling column design and is particularly suitable for tool, mould and machine building with a new design. Distance spindle nose – table Vertical: approx. 300 – 1,350 mm with universal milling head (UFK): Vertical: approx. –290 to +760 mm Horizontal: approx. –55 to +995 mm in the table area: approx. 180 – 955 mm Spindle / Speeds Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK) Rotation around vertical axis: 360° (indexing 2.5°) Horizontal axis swivel: ±110° (indexing 2.5°) Electrical data (nameplate) Connected load: ...
Vertical machining center Emco FAMUP MCX 750-1200 with IKZ 40bar Year of Make: 2007 Control: Fanuc 21i Running hours: 8,500h Chip Blaster High Pressure System - Max. speed 8,000 min. • Tool magazine with 24 magazine slots (ISO 40), • Tool holder ISO 40 - 24 Tightening bolts ISO 40 • Standard paintwork: Red – Grey – Black • Spindle is prepared for high-pressure cooling (port A) • Threading without compensating chuck • Central lubrication system • Chip removal from the housing via a wash-down device • Rinsing gun for cleaning work area, clamping devices, parts • Coolant device with 3 adjustable nozzles • Coolant tray 500 l • Spindle blow-out device for cleaning the holder during tool change • Lighting of the work area by halogen lamp 24 V • Two-color alarm lamp TECHNICAL DATA MCX 750 Axis X - longitudinal: 750 mm Axis Y ...
KIMLA BPF 2131 CNC router was built in 2020 in Poland by POLCOM Przemysław Kimla. The machine has only worked for 180 hours, it is like brand new. KIMLA BPF 2131 is designed for both small and medium-sized industrial plants with a diverse production profile. It allows precise machining of a wide range of materials, such as soft metals, wood and plastics. These workpieces are machined on a large vacuum table by means of a powerful spindle. The work table’s design enables separation of independent sections so that the work area can be adapted to the specific workpiece. All axes, in turn, are driven by high-performance digital AC servo drives, which guarantee excellent feed dynamics and precision during even the most intensive tasks. The BPF 2131 router is offered with an extensive range of equipment, consisting of, among others, an advanced control system and a vacuum pump. The total ...
turning diameter: - mm turning length: - mm control: - : ohne Gewähr total power requirement: - kW weight of the machine ca.: 4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC machining center Type: c-expres 920 classic Manufacturer: Format-4 Year: 2017 included: 15 drills 1x milling cutter 1x saw Machine in good condition, fully functional, under power Find more here - / Contact us at -
Turning diameter over bed/face slide: 560mm/370mm, turning length: 2000mm, spindle bore: 90mm, speed: 1800rpm, dimensions X/Y/Z: approx. 3800mm/1700mm/2100mm, weight: approx. 3300kg, control: Bosch CNC Alpha 2000/2, operating hours: 60000. Including various holders, 3- and 4-jaw chucks.
Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible.
maximum number of results exceeded
please refine your search
