131,224 used machines on RESALE, but how to find them? Machine Search
Fanuc ROBODRILL ALFA T10 B, Built in 1995 Revolutions 8000 rpm Picture Sk 30 Control Fanuc 16 M Tool changer 10-fold
Inv. Num. : 8686 Type: Emcomat FB-450 MC Producer: EMCO Created: 2019 Parameters: Control system: Siemens Sinumerik 828D Work table length: 800 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 10 kW Maximum vertical spindle speed: 5000 1/min X-axis travel: 450 mm Y-axis travel: 350 mm Travel Z axis: 400 mm Machine height: 1990 mm Machine length: 1980 mm Machine width: 2030 mm Machine weight: 2300 kg Equipment: Horizontal support arm Handwheel Tool holders (12 pieces) Mounting pads
gebr. Milling machine, Fabr. Maho 1000 S x-travel: 1000 mm Y-travel: 600 mm z-travel: 800 mm Kne Uretrnrpehyxkjb Spindle holder ISO: 50 Control is the Philips 432 with pallet changer, in working condition, recently overhauled rotary table
An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.
Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg
Machine data: Control Heidenhain TNC 355 Year of manufacture 1989 Travel: X 600 mm travel Y 450 mm travel Z 400 mm travel Spindle speed 20 – 4000 min-1 Angle table size 850 x 440 mm Swivel table 650 x 395 mm Electronic handwheel The machine is still energized and in good condition.
Maho 700 C, built in 1983 Travel X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle holder: ISO 40 Speed: 3150 rpm Spindle stroke: 100mm Weight: approx. 3500kg Control: Philips CNC 432
Key data: 530 mm, 450 mm, 450 mm
5-Axis CNC Machining Center Mikron UCP 600 Year of Make: 2004 Control: Heidenhain iTNC 530 x-travel: 530 mm y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 12,000 rpm Swivel table STP: Ø 400 mm Tool changer: 30 x Weight: approx. 6.5 t Switch-on hours: approx. 49,000 h Spindle hours: approx. 2,500 h
Lid FP4-MA Contur 2 with handwheel ( universal tool milling machine ) BJ 1987
Hurco VMX 24, YOC 2003 Travel X/Y/Z: 610mm/508mm/610mm Rapid traverse X/Y/Z: 35m/35m/30m Feed: 7600mm/min Table dimensions X/Y: 760mm/510mm Max. table load: 700kg Tool holder: SK40 Tool Positions: 24 Spindle speed: 10000rpm Power: 7.5kW Dimensions approx. 2200mm/2400mm/2500mm Weight: approx. 5000kg Control: Ultimax 4 (Documentation available)
A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.
DMG, Type DMC 635 Ecoline, YOC 2013 Travel: X 635mm Y 510mm Z 460mm Spindle speed 0-10000/min. Controlled axes 3 Spindle holder SK 40. L x W x H 3,500x4,000x2,700mm Machine weight 4500kg
Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China.
Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China.
Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.
CNC lathe Type: CTX 510 Ecoline Manufacturer: DMG Year: 2011 Control: Siemens Sinumerik 810D Max turning diameter: 465 mm Max swing over bed: 680 mm Max swing over support: 465 mm X: 300 mm Z: 1050 mm 315 mm 3-jaw hydraulic chuck Max spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% DC): 33/22 kW Max spindle torque (40%/100% DC): 33.5%: 630/420 Nm Maximum rotation speed of driven tools: 4000 rpm Programmable tailstock Tool probe Chip conveyor Suction Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions: 5250 x 2300 x 2000 mm Machine weight: 8000 kg In good condition, under power After repairing the linear line Accessories: Both external and internal tool holders Driven tool holders – direct and lateral Drill holders Hard jaws - 1 set Soft jaws - approx. 10 sets Find more here - / Contact us at -
Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg
CNC lathe Type: Alpha 2800 XS Manufacturer: Colchester Year: 2011 Control: Fanuc Series 21i-TB Spindle bore: 120 mm Swing over bed: 800 mm Swing over support: 520 mm Max turning length: 1500 mm Machine in good condition, under power Find more here - / Contact us at -
Travel X/Y/Z: 1100mm/550mm/560mm, tool holder: BT40, spindle speed: 6000rpm, tool positions: 24, control: Mitsubishi. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible.
Flame and plasma cutting machine Bach Thermocut BJ 2008
Travel X/Y/Z: 800mm/550mm/550mm, tool holder: HSK63, spindle speed: 12000rpm, tool positions: 65, control: Siemens 840D, spindle hours: approx. 16000h. 3-axis robot System 3R Transformer WorkMaster, year of manufacture: 2008, transfer weight: 150kg, stroke: 1500mm, pallet positions: 2x12. Including System 3R GPS 240 zero-point clamping system, Knoll chip conveyor, Knoll paper band filter, Blum LaserControl laser measuring system, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible.
A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible.
DUGARD EAGLE 850 VMC CNC vertical machining center was built in 2007 in Taiwan by C Dugard Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. All machining processes, i.e. milling, drilling and threading, are performed fully automatically by a reliable high-speed spindle. A large, 24-position magazine selects the shortest possible access path to the cutting tool, thus significantly reducing production cycle times. All this is complemented by an advanced CNC control with many useful functions, which minimises the need for the operator to operate the machine. The EAGLE 850 VMC CNC machining center weighs 5500 kg. Technical specifications of the DUGARD EAGLE 850 VMC CNC milling machine - CNC controller: FANUC 0i-MC - feed in the X/Y/Z axis: 850/520/510 mm - rapid traverse in the X/Y/Z axis: ...
MAGNUM YAMA SEIKI BT-1300 CNC bed milling machine was built in 2007 in Taiwan by Magnum Machinery CO., Ltd. The machine, distinguished by its very rigid design and good kinematics, is an excellent choice for precision machining of heavy workpieces. The machining process is performed inside an enclosed workspace, which includes among others a large work table with a length of 1300 mm and a reliable spindle. Feed in the X and Y axes is performed by the work table, while in the Z axis it is performed by the spindle, which moves along precise vertical guides. All this is complemented by the installed MITSUBISHI CNC control, thanks to which the offered YAMA SEIKI BT-1300 CNC bed mill is extremely easy to operate. Technical specifications of the MAGNUM YAMA SEIKI BT-1300 milling machine - CNC controller: MITSUBISHI MELDAS 60S - work table length: 1300 mm - T-slot number: 5 - power: 22 k ...
Inv. Num. : 8715 Type:- Producer: VOLTER Created: 2022 Parameters: Work table length: 2200 mm Work table width: 1610 mm Spindle drive power: 7.5 kW Maximum vertical spindle speed: 24000 1/min Lifting height: 160-180 mm Machine length: 3300 mm Machine width: 2100 mm Machine weight: 1200 kg Equipment: 4-zone vacuum table T-slot clamping system Spindle air cooling Semi-automatic tool clamping Laser starting point indication Wireless remote control CAN SW ISO 30 Terminals T12 Terminal Set Workpiece Probe
A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.
A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible.
Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible.
Factory no. 021172, table dimensions 6000x2200 mm, feed x 6000 mm, feed y 2200 mm, feed z 1000 mm, spindle speed 0-6000/min, tool magazine 40 pcs, tool weight 25 kg, power 65 kW, weight 47570 kg, Results from the geometric measurements of this machine.
Manufacturer: Voortman Model: V320-2000 Year of Manufacture: 2019 Operating Hours : approx. 5,800 h Including plasma source Kjellberg Smart Focus 300 and extraction unit Donaldson DFPR06 (last filter change January 2025) Technical Specifications Working Range: - Plate length (min/max): 850 – 6,100 mm - Plate width (min/max): 200 – 2,050 mm - Plate thickness (min/max): 6 – 75 mm - Max capacity: 7,500 kg - Material: Steel Drilling Unit - Type: VD40 - Automatic tool changer: 2 × VTC 5/40 (2 × 5 positions) - Feed and positioning: Servo-driven synchronous servomotors, frequency converter - Spindle speed: 0 – 2,500 rpm (servo motor) - Power: 30 kW - Cooling: Internal cooling air/oil - Tool holder: SK 40 - Drilling diameter: 5 – 40 mm - Thread cutting: M6 – M30 - Countersinking: Yes - Centering capability: Yes - Layout marking (optional): Yes - Hydraulic clamping: Yes Pl ...
CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of Make: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with power source Kjellberg HiFocus 280i TEKA filter system
Fanuc + 3 Breton machining centers
A self-built CNC milling machine by Klein GmbH is available. Travel X/Y/Z: 980mm/415mm/90mm, machine dimensions X/Y/Z: approx. 2200mm/1550mm/3000mm. An on-site inspection is possible.
KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...
DAHLIH MCV 720 CNC vertical machining center was built in 2006 in Taiwan by DAHLIH MACHINERY INDUSTRY CO., LTD. The machine, distinguished by its high efficiency and reliability, is an excellent choice for precision machining of workpieces with a maximum weight of 500 kg. The machining process is performed inside a large work space by means of a high-speed spindle and cutting tools taken from a 30-position magazine. All this is complemented by an advanced FANUC CNC control with an intuitive interface. The DAHLIH CNC machining center weighs 4400 kg. Technical specifications of the DAHLIH MCV 720 CNC milling machine - CNC controller: FANUC Series 0i-MC - work table dimensions (L x W): 950 x 560 mm - T-slot number: 3 - maximum workpiece weight: 500 kg - maximum spindle rotational speed: 8000 rpm - spindle taper: BT 40 - spindle drive power: 11 kW - 30-position tool magazine - di ...
Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40
A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment.
Stock number: 4000 PROCESSING Manufacturer: MAZAK, Type: VCN 510 C Year of Make: 2006 Specifications: Table size 1350 x 550 mm Large table load 1000 kg Longitudinal movement (X) 1050 mm Transverse movement (Y) 510 mm Vertical movement (Z) 510 mm Spindle cone MAS 40 Infinitely variable spindle speeds 12000 rpm Tool changer 30 places Control Fusion 640 Fabr. Operating hours spindle 7419 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Length: 2800 mm, Height: 2800 mm, Width: 2900 mm, Weight: 7100 kg
Stock number: 4001 PROCESSING Manufacturer: MAZAK, Type: VCN 410A-II Year of Make: 2009 Specifications: Table size 900 x 410 mm Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 510 mm CAT 40 spindle cone Infinitely variable spindle speeds 12000 rpm Spindle motor 11/7.5 Kw Tool changer 30 places Control Mazak Matrix Fabr. Controlled in axes 3 Operating hours spindle 7746 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Tool Measuring Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG
Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.
A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible.
Inv. Num. : 8688 Type: Beyeler PR 150 IPC Producer: Bystronic Created: 2004 Parameters: Compressive force: 150 t Maximum bending length: 3100 mm Stroke: 215 mm Machine weight: 10000 kg Machine condition: out of order
The machine is in good technical condition, testing is possible by prior arrangement.
MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining ...
Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.
A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
