cnc turning used for sale

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

weight of the machine ca.:9,5 t x-travel:406 mm z-travel:380 mm

turning diameter:150 mm total power requirement:36 kW

turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m

turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m

weight max. in kg:3000 kg weight:330 kg Dimensions (L/W/H):800x320x430 mm

weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

This 4-axis DMG MORI CLX 450 V6 was manufactured in 2019. It features a maximum Z-axis travel of 830 mm and X-axis travel of 750 mm, along with a counter spindle capable of 5000 rpm. The machine includes a bar package, pneumatic workpiece ejection device, and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V6 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis MURATA MZ60 CNC Lathe was manufactured in 2000. It features a high-speed spindle with a maximum speed of 6,000 rpm and a tool capacity of 12 tools. The X-axis travel is 125 mm, and the Z-axis travel is 120 mm. If you are looking to get high-quality turning capabilities, consider the MURATA MZ60 machine we have for sale. Contact us for further details.

Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.

This 9-axis TRAUB TLN20 was manufactured in 2018. It features a maximum bar diameter of 20 mm and a main spindle speed of 10,000 rpm. The machine includes an upper turret with 8 stations and a lower turret with 8 stations, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the TRAUB TLN20 swiss type turning machine we have for sale. Contact us for further details.

Technical data approx.: - Largest turning diameter - over bed 560 mm - via flat slide 315 mm - Center width 1500 mm - Traverse transverse slide approx. 300 mm - Spindle bore 80 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 150 mm - Spindle speeds 1 - 2500 rpm - Rapid traverses X / Y -with: - NC – FANUC control - 2 E. handwheels for manual turning -Tailstock - Coolant device - Drive 400 V / 7.5 kW - Space requirement approx. W 3250 x H 1750 x D 1500 mm - Weight approx. 3800 kg

turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

804337 Spindle and nut X-axis TOS TRENS SN50 series

Container turning station with belt conveyors possible for different containers very good condition

Spindle and nut X-axis 1015037

Model V 1000 Machine no. HO 1026 Center height over flat web 500 mm Circumferential diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face plate diameter 900 mm Max. workpiece weight between tips 5,000 kg Max. workpiece weight with 1 setting stick 6,000 kg max. workpiece weight with 2 stacks 7,100 kg incl. documentation

Key data: 800 mm, 2000 mm, 800 mm

Model V 800 Machine no. 1049.2955-07 Year of manufacture 1980 Circumferential diameter over bed 800 mm Turning length 2,000 mm Center width 2,000 mm Spindle bore diameter 128 mm Number of bed sleds 1 Quill Cone Morse 6 Voltage 380 V Three-phase current 50 Hz incl. documentation

Geminis GE870 used lathe. Distance between centers: 2.000mm. Swing: 870mm. Swing in carriage: 580mm. Swing in gap: 1.100mm. Bore: 82mm. 18 speeds (16-1250rpm) Equipped with universal chuck. Equipped with 4 jaws chuck. Equipped with steady rest Equipped with follow steady rest. CE for used european machinery.

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

Fully functional Traub lathe built in 1972 Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002

Inv. Num. : 7877 Type: TH 4010 Producer: OPTIMUM Created: 2018 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 410 mm Minimum spindle speed: 45 1/min Maximum spindle speed: 1800 1/min Cone: MK 3 Rotary spindle pass-through diameter: 52 mm Power consumption: 1.5/2.4 kW Length: 1920 mm Width: 740 mm Height: 1222 mm

VTL made by CKD SKJ 25/50 y.m. 1977/2009 g.o. SINUMERIK 840D Technical data of the machine The largest turning diameter with a side support is 4000 mm The largest turning diameter 2500/5000 mm Max workpiece height 2000 mm Clamping plate diameter 2500 mm Max workpiece weight 40 t Machine power 165 kW Weight 41,300 kg

Please see the pictures for details

Kanteneinschlagmaschine / Turning-In Machine Hunkeler BE 110 Arbeitsbreite max. / Working width max. 1100mm Pneumatische Ausführung / PneumaticOperation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Inv. Num. : 7997 Type: SC 3200 Producer: TITAN Created: GO 2020 Parameters: Control system: Sinumerik 840D SL Table diameter: 3000 mm Max. turning diameter: 3300 mm Motor power: 55 kW Max. workpiece height: 2260 mm Max. workpiece weight: 18000 kg Maximum table speed: 92 1/min Weight: 48000 kg

Turning Diameter 830 mm Turning lenght 750 mm Spindle speed 2000 rpm Controller FANUC-i Chuck size 24"

Workspace: - Travel in X/Y/Z: 220 / - / 710 mm - Center width: 700 mm - Tip height: 170 mm Main spindle: - Max. speed: 3000 rpm - Spindle connection: size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Inner cone: MK3 - Quill stroke: 120 mm - Inner cone of the quill: 50 mm

Key data: 3600 mm, 4200 mm, 4800 mm

Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Circumferential diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam in 100 mm increments 2,800 mm Crossbeam Support (Right) Horizontal adjustment support - 1,800 to + 2,200 mm Vertical displacement of the chisel slide valve 1,500 mm Cross-section of the chisel slide 240x240 mm Tool stations 20 pcs. Side Support (Right) Vertical adjustment support 2,800 mm Horizontal displacement of the chisel slide valve 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool Changer Main Drive: Main motor power 105 kW Face plate speed  ...

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.’ � ...

Surfaces of reference plates, roughness measures MASSI turning TGL 4763 Rz 0.4 μm - Rz 1.6 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surfaces of reference plates, roughness measures MASSI turning TGL 4763 Rz 2.5 μm - Rz 10 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI turning TGL 4763 Rz 3.2 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surfaces reference plates, roughness measures MASSI turning TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box Dimensions: 240 x 125 x 30 mm

Pallet Turning Device FLOWER 2 x 1000 kg for Euro pallets 360° rotatable with locking to 0° and 180° Dimensions: 2200 x 1900 x 800 mm

Lathe chisel PAGUS 315 x 40 x 40 mm ( 315x40x40mm) length hardened area: 70 mm tip length: 55 mm depth tip: 15 mm New ! Dimensions: 315 x 40 x 40 mm

Description HERSTEL Vertical Lathe VDM 120 Details Year of construction 1998 Control Siemens Sinumerik 840C Flexos Max. turning diameter 1,300 mm max. circulating diameter 1,400 mm (option 1,500 mm) Axis stroke Z/X axis 1,000/1,000 mm (option 1,000/1,500 mm) Dimensions to top edge of spindle 940 mm Main Spindle Bearing Circulation Lubrication 2-speed manual transmission autom. Range switching Main spindle motor 76/115 kW Clamping device diameter 1,600 mm Chuck pick-up centering diameter 790 mm Max. feed force Z-/X-axis 25,000 N Axis speed Z-/X-axis 0.01 - 14,000 mm/min. Disc turret with B-axis Tool holder modular system UTS 50 Main dimensions approx. 6,250 x 3,300 x 4,500 mm incl. documentation

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

new corpus turning up machine - fixed elements Brand: Formetal Type: RT.90F technical data: - fixed elements Transport input length 2.500 mm Transport output length 1.000 mm Transport width 600 mm Working height infeed conveyor 700 mm working height outfeed conveyor 250 mm Transport speed 10 - 25 m/min. (with inverter control) Different speed for load and unload max. weight 100 kg - corpus turning up machine RT.90F without electric equipment OPTIONAL: - Safety light barrier (infeed and outfeed) - electric box with SIEMENS PLC S71200 - Safety fence

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

propulsion: 0,75 kw motor wihtout brake 1380 r/min description: with pusher and modular belt availability: immediatelly Installation dimension: 1405 x 1120 x 200 mm Usable width: 500 mm transport size: 1550 x 1200 x 1300 mm weight (m) [kg]: ca. 250 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-si ...

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Marchesini 3G20100610 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 130 kg

Marchesini RIBATINO RIB. 730 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 120 kg

Manufacturer: Biesse Längs auf Quer, Type: RBO GP 90, Year: 1996, Angular transfer: yes, Turning station: yes, Working length max mm: 3000, Working lenght min mm: 250, Working widht max mm: 1300, Feeding speed max m/min: 50, Feeding speed min m/min: 10, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: ca.3000, roller diameter mm: 80, Recharging length mm: ca.6000, Working hight mm: 950, Engine power kW: 2,5, Wight approx. kg: 950, Year :1996

Manufacturer: Biesse, Type: RBO GP 90, Year: 2002, Angular transfer: yes, Working length max mm: 3000, Working lenght min mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-50, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000/1300, roller diameter mm: 80, Engine power kW: 3,55, Wight approx. kg: 800, Year :2002

Manufacturer: Biesse Quer auf Längs, Type: RBO GP S 88, Year: 1998, Angular transfer: yes, Turning station: yes, Working length max mm: 3000, Working lenght min mm: 250, Working widht max mm: 1300, Feeding speed max m/min: 10, Feeding speed min m/min: 50, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000, roller diameter mm: 80, Recharging length mm: ca.6000, Engine power kW: 3, Wight approx. kg: 950, FREE TEXT: Rechtsmaschine Anschlaglineal Rechts, Year :1998

Manufacturer: Biesse Drehstation läng auf Quer, Type: RBO GP 90, Year: 1998, Angular transfer: yes, Turning station: yes, Working length max mm: 3000, Working lenght min mm: 250, Working widht max mm: 1300, Feeding speed max m/min: 50, Feeding speed min m/min: 10, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000, roller diameter mm: 80, Recharging length mm: ca.6000, Working hight mm: 950, Engine power kW: 3, Wight approx. kg: 950, FREE TEXT: Ausrichtlineal querübergabe, Year :1998