137,847 used machines on RESALE, but how to find them? Machine Search
turning diameter: 480 mm turning length: 800 mm control: System TX8F turning diameter over slide: 240 mm spindle passage: 65 mm chuck diameter: 200 mm turning speeds: 4000 U/min power capacity: 30 kW total power requirement: kW weight of the machine ca.: 4,3 t dimensions of the machine ca.: m powered tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 110 mm, 450 mm, 5600 1/min
Year of manufacture 1996 Control: TX8 F incl. Simag 42.1 bar feeder Year of construction 2003 The bar feeder is max. approx. 3.2m for 3m bars. with a lot of accessories The machine is still under power and available at short notice
Philips B2T control Circumferential diameter 640 mm Machining diameter longitudinal 550 mm Machining diameter on the drum turret 450 mm Turning length 1000 mm Spindle speed 2,240 min-1 Spindle bore 103 mm 12-speed drum turret VDI 60 Chip conveyor
Manufacturer: MAS Model: SP 280 Y Year: 2012 Condition: Used Stock number: 9357 Control system: SIEMENS SINUMERIK Max. turning length: 550 mm Maximum turning diameter: 280 mm Maximum turning diameter over bed: 570 mm Maximum spindle speed: 4000 1/min Length: 3875 mm Width: 2122 mm Height: 2345 mm Weight: 7700 kg VDI 40 holders
greates pass round over bed: 650 mm Swing dia. over traverse guideway: 420 mm Distance between centres: 2.000 mm control: Sinumerik Siemens slide travel X-axis: 440 mm slide travel Z-axis: 2.000 mm Main spindle:: turning speed range - main spindle: 1 - 3.000 min/-1 power capacity - main spindel: 33 / 27 / 22 kW transmission ratio: 2 spindle diameter in front bearing: 140 mm spindle bore: 106 mm standard chuck diameter: 250 - 400 mm spindle head: DIN 55026 / A8 turret head: 12 pos. turning tool - shaft cross cut: 32 x 32 mm feeds:: rapid traverse: X: 5 m/min rapid traverse: Z: 10 m/min feed range: X: 0,001 - 1.000 mm/min feed range: Z: 0,001 - 2.000 mm/min power feed coss: 9.000 N power feed longitudinal: 12.000 N Tailstock:: diameter of quill: 100 mm quill travel: 200 mm taper of center: MK 6 total power requirement: 38 kW weight of the machine ca.: 6,0 t dimensions of the machine ca. ...
turning diameter: 650 mm turning length: 1500 mm control: OSP-P300SA -L Main Spindle:: main spindle speeds:: 4200 spindle motor: 32/22 kW diameter of main spindle: A2-8 mm travel -x axis: 644 mm travel -z axis: 1600 mm travel -y axis: 300 (+/- 150) mm rapid traverse: 50 / 40 / 50 m/min milling spindle: 12.000 U/min spindle motor: 22/15/11 kW spindle bore: 130 mm c-axis: 360 ° b-axis: 240 ° 2nd Spindle:: Subspindle Power: 22,4 kW spindle turning speed range: 5000 U/min W-axis (spindle longitudinal): 1584 mm spindle nose: A2-6 total power requirement: kW CNC turning & milling center - equipped with: - CNC control OSP-P300SA-L THINC Control, Full 5-Axis, - Contouring B-Axis Milling Spindle (12,000 RPM, CAPTO C6) - Y-Axis - LOWER TURRET (STATIC) - BIG BORE (3.1” BAR CAPACITY – MAIN SPINDLE) - 2-SPEED GEARBOX - ROYAL QG-80 COLLET CHUCK (MAIN) - ROYAL QG-65 COLLET CHUCK (SUB) - C-AXIS ...
Key data: 660 mm, 1495 mm
Mazak Integrex 200-lV ST CNC turning-milling center with second spindle CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Spindle speed 35 - 5000 rpm Spindle speed sub spindle 35 - 5000 rpm Milling head speed 15 - 21,500 rpm X-axis travel 580 mm Y-axis travel 160 mm Travel of the Z-axis 1,545 mm Travel of the B-axis 225 ° C-axis indexing 0.0001° (360°) Tool Taper Capto C6 Number of tools in the magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Guild Master CTX 510 Control: Siemens 840 D with Shop - Turn Year of Make: 2004 Travel X / Z: 300 / 1050 mm Revolver: 12-speed Tool holder: VDI 40 Bsbmezmxz Roknrzodf Spindle speed up to: 3,500 rpm Bar passage: 90 mm Quill travel: 150 mm Tailstock Cooling 20 bar Chuck size 315 mm Spindle hours approx: 14,000 Batch sizes from 0 - 5 were produced on the machine Programming was done on the machine
Weiler DZ 40, Year of manufacture 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Turning diameter 180 mm, Bobmkney Ev Iujrzedf Circulation Ø max. 560 mm, Y axis +/- 25 mm, Q axle / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotative, Tailstock MK 4, Main spindle max. rod passage 42 mm, Spindle bore 52 mm, Rapid traverse X/Z/Q 30/30/20 m/min, Turret 16 speed - all stations driven, VDI 25, Shaft diameter 25 mm, Requested. Tools up to 4,500 rpm, Parts tray, accessories, Requested. Tool holders, rigid holders,
Machine had annual maintenance by Okuma CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine 80 Ww compartment, Main spindle with C axis, counter spindle with C axis, Y axis slide top / milling spindle, Mounting HSK 63, Stepless B axis as milling spindle, Center width 1500 mm, Spindle bore 80 mm, Max. circulation Ø 550 mm, Swivel Ø 350 mm, Revolver lower 12 ply with applied revolver. tools, Interlite Compact Filter System 900 l, suction, Spindle running time approx. 18300 h, Päneförderer, Tool changer gripper arm completely renewed, high-pressure cooling, WZG measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Sub-spindle Kitagawa B - 208,
bar material dia.: 20 mm spindle passage: 24 mm turning speeds: 10.000 U/min turning length: 350 mm Control: CNC Yaskawa Siemens 840Di c-axis: 0,01° ° gripping station: 20 mm c-axis: 0,01° ° speeds: 10.000 U/min rapid traverse: 20 m/min turret (x-stations): 3 x 8 + (3x Y-Achse) total power requirement: 5,5 kW weight of the machine ca.: 4.850 t dimensions of the machine ca.: 3,2 x 1,75 x 1,9 m driven tools: 3 x 8 bar loader: FMB high pressure pump: ja/yes parts conveyor: ja/yes option long parts: ja/yes CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 500 mm, 6000 1/min
Manufacturer: GOODWAY Model No.: GLS-150 Year: 2006 Condition: Used Stock number: 9393 Control System: FANUC Series Oi-TC Maximum turning length: 500 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 6000 1/min Travel X: 210 mm Travel Z: 520 mm Weight: 3200 kg Chip conveyor
The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter: 350 mm. Max. turning length: 500 mm. Max. bar turning diameter: 79 mm. Max. spindle speed: 3,500 rpm. Chuck size: 10″ (254 mm). Spindle motor power: 18.5 kW. Additional equipment: 1x Morse taper 2 adapter, 1x Morse taper 3 adapter.
turning diameter: 280 mm turning length: 400 mm control: Fanuc 18 T spindle bore diameter: 51 mm number of controlled axis: 2 turning speed range: 0 - 4000 U/min rapid speed: 30 m/min number of tapers in turret head: 12 VDI 40 tail stock: Ja dimensions: 3,9 x 1,6 x 2,1 m weight of the machine ca.: 3,9 t power requirement: 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...
Vertical Two-Spindle Turning Center - Control Siemens 840 D - Machine bed VSC 400 Duo - 2 x disc turret 12 x dia 40 mm, driven - 2 x additional drilling and countersinking station - Open workpiece transport system - Transfer and turning unit - Interface to an external handling system - Central cooling center supply high-pressure pump 70 bar - Blowing off the pick-up device and the clamping devices - Workpiece measurement - Tool monitoring - Emag network option - Sister tool management Circumferential diameter 260 mm x-travel 860 mm z-travel 200 mm Main spindle 2 max. speed up to 4500 1/min Spindle spacing 1055 mm Main Drive 2 AC Asynchronous Motor 6ß/100% ED 39/28 KW Maximum torque 460 Nm Rapid traverse x/ z 45/ 30 m/min
turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 420 mm turning length: 650 mm control: Okuma OSP-U100L spindle bore: 95 mm spindle turning speed range: 2800 U/min travel -x axis: 300 mm travel -z axis: 675 mm main drive motor: 22/30 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2700 x 1900 x 1885 mm First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 475 mm turning length: 830 mm control: HEIDENHAIN MANUALplus 620 swing diameter over slide rest: 260 mm centre distance: 1000 mm spindle bore: 70 mm spindle turning speed range: 1 - 3000 U/min feeds - cross: 0,001 - 1000 mm/U feeds - longitudinal: 0,001 - 2000 mm/U rapid travel - longitudinal/face: 10 / 5 m/min tailstock quill diameter: 70 mm tailstock quill stroke: 120 mm tailstock quill taper MT: 5 main drive: (40 % ED) 25 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: m Control HEIDENHAIN MANUALplus 620 DXF conversion software (processing of contours in DXF format from CAD drawings) Ethernet and USB interfaces inside the control cabinet Coolant system (frequency-controlled), 1–4 bar Glass scale for direct position measurement on the X and Z axes 4-position PARAT quick-change tool holder, size 2, with several inserts 3-jaw-chuck RÖHM ZS 2 ...
turning diameter: 660/275 mm turning length: 1498 mm control: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm 9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Island ...
faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 95950 € : 1813.46 € : 630 mm : 2000 mm : 85 mm : 400 mm : 350 mm : D1-8 : 1/16 MK : 3 : 37 - 2250 1/min : 5000 mm/min : 8000 mm/min : 280 mm : 75 mm : 5 MK : 190 mm : 9 / 13.5kW (S1 / S6 40%) kW : X: 0.02 Z: 0.04 mm : X: 0.01 Z: 0.035 mm : ISO3655 : 3840 mm : 1905 mm : 2235 mm : 4200 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis A ...
turning diameter: max. 480 mm turning length: max. 2.000 mm control: Sinumerik 840 D Siemens swing diameter max. over bed cover: 520 mm Main spindle:: turning speed range - main spindle: 7 - 2.800 min/-1 transmission ratio: 2 power capacity - main spindel: 53 kW max. Torque: 3.456 Nm spindle nose: 11 DIN 55026 chuck diameter: 315 mm spindle bore: 103 mm usable bar diameter: 82 mm axis stroke:: x-travel: 405 mm z-travel: 2.049 mm Tailstock:: diameter of quill: 100 mm quill stroke: 100 mm tension force: 14 kN capture: 30 DIN 2079 feeds:: rapid traverse: 10 m/min Working speed: 0,1 - 10.000 mm/min feed power: 15 kN Tool Mount:: number of toolpositions: 12 pos. driven statition: 6 pos. Shank diameter: 50 mm power capacity: 5,4 kW Max. Speed: 2.500 / 625 min/-1 max. Torque: 25 / 100 Nm total power requirement: ca. 50 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 6,4 x ...
turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...
turning diameter: 390 mm turning length: 507 mm control: MSG 805 MAPPS max. turning diameter: 390 mm greates pass round over bed: 680 mm Swing dia. over traverse guideway: 510 mm centre distance: 618 mm Main spindle:: turning speed range - main spindle: 45 - 4.500 min/-1 power capacity - main spindel: 11 / 7,5 kW spindle bearing diameter: 110 mm spindle bore: 73 mm max. bar capacity: 51 mm spindle nose: JIS A2-6 chucking diameter: 210 mm C-Axis: 0,001 ° axis stroke:: x-axis: 235 (195+40) mm z-axis: 520 mm turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tool stations: max. 3.000 min -1 power capacity driven tool-stations: 5,9 / 4,5 kW Shank height for square tool: 25 mm Drill shank diameter: max. 50 mm turret change time: 0,2 sec. Tailstock:: tailstock adjustment: 490 mm dia. of quill: 85 mm taper of center: MT 4 quill stroke: ...
turning diameter: 310 mm turning length: 600 mm control: Sinumerik 810 D PL Siemens turning diameter over bed: 425 mm Main spindle: turning speed range - main spindle: 500 - 4.500 min/-1 max. Torque: 280 Nm power capacity - main spindel: 16,5 kW Spindle diameter: 100 mm C-Axis: 360 ° chucking diameter: 210-52 mm spindle bearing diameter: 120 mm clamping cylinder: 65 mm Bar feed: max. 65 / (52) mm spindle nose: A8 DIN 55026 axis stroke:: x-axis: 230 mm z-axis: 740 mm rapid traverse X-axis: 15 m/min rapid traverse Z-axis: 24 m/min turret:: tool positions turret: 12 pos. driven statition: 12 pos. tool taper: VDI 30 DIN 69880 Spindle speed driven tools: 6.000 min -1 power capacity - driven tools: 3,7 kW max. Torque: 9,5 Nm tail stock: dia. of quill: MK 4 80 mm quill stroke: 120 mm tailstock adjustment: 475 mm tension force: 500 daN total power requirement: - kW weight of the machine ca. ...
turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 6000 U/min x-axis: 550 mm z-axis: 200 mm rapid traverse: 30/20 m/min feed: 11 m/min control: Siemens 840 C total power requirement: 35 kW weight of the machine ca.: 6,5 t - speeds: [1/min.] : 6.000 - torque [Nm]: 480 - swing diam.: 290 mm - power: [kW] 34 - chuck diam. 200 mm - turret: 12-fach, VDI 40, Sauter - driven tools 7,8 KW, - x -travel: 550 mm - z- travel: 200 mm - rapid travel: (X/Z) [m/min] 30 / 20 - feeds: (X/Z) [m/min.] 11 KN - connected load: [KW] 36 kW - machineweight: [kg] 6.500 - chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm - Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain - parts conveyor for feeding parts into the machine - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit replaced The data for this ad was created with ModulMWS - the software solution of Logo ...
turning diameter: 370 mm turning length: 424 mm control: MSX-711-IV Mori Seiki swing diameter: 370 mm X1- Axis: 380 mm X2- Axis: 155 mm Z1- Axis: 460+155 mm Z2- Axis: 610 mm y-axis: +/- 105 mm B - axis: +/- 120 ° bar material dia.: 65 mm speed spindle max.: S1 5.000 / S2 6.000 U/min. spindle bore: S1/S2 65/38 mm : 12000 1/min tool taper: Capto C5 toolpiece magazine: chain magazine: 76 Stück tool turret with 10 work positions: total power requirement: 45 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X,Y,Z,B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000 The data for this ad was create ...
turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool turret 12 times: C4 Capto total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. ...
turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The data ...
turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm travel -x axis: 280 mm feed x-axis: 0,1 - 30.000 mm/min rapid traverse X-axis: 30 m/min travel -z axis: 1.150 mm Feed z- axis: 0,1 - 60.000 mm / min. rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/min tool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The dat ...
turning diameter: 45 mm turning length: 50 mm control: Mitsubishi FCA70LPC-V Spindle Speed: 8.000 U/min. travel -x axis: 180 mm travel -z axis: 200 mm rapid power traverse in X-and Z direction: 20 / 30 m/min weight of the machine ca.: 1.600 kg dimensions of the machine ca.: 1700x700x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 168 mm turning length: 145 mm travel -x axis: 130 mm travel -z axis: 110 mm Spindle Speed: 45 - 6.000 U/min. control: spindle passage: mm spindle bearing diameter: mm bar material dia.: mm total power requirement: kW machine weight ab.: kg rapid traverse x + z axis: 18 / 24 m/min rapid traverse X- and Y-axis: 24 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 176 mm turning length: 570 mm swing diameter: 510 mm working diameter: 420 mm travel -z axis: 570 mm travel -x axis: 245 mm spindle bore: 43 mm diameter of quill: 85 mm quill stroke: 120 mm Spindle Speed: 60-6.000 U/min. rapid power traverse in X-and Z direction: 24 m/min total power requirement: 5,5 kW control: MSG-805 V weight of the machine ca.: 3.400 kg dimensions of the machine ca.: 2000x1700x1800 mm Features/Accessories: - Integrated CNC control - Bed guides and cross-slide guides are induction-hardened and designed as flat guides - Continuously variable AC main spindle drive - Constant cutting speed programming - Cold light lamp integrated into the machine - Power meter for the main spindle drive (ammeter) - Control units for automatic and manual operation, as well as a CNC programming unit and control panel - Tailstock with hydraulically actuated MK 4 tailstock ...
turning diameter: 40 mm turning length: 50 mm control: Fanuc 0i-TD Spindle Speed: 8000 U/min. travel -x axis: 180 mm travel -z axis: 200 mm rapid power traverse in X-and Z direction: 15 m/min weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1500x700x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 190 mm turning length: 190 mm control: BOSCH CC 200 total power requirement: 12 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2 (9 ) x 1,5 x 1,8 m Movie: https://www.youtube.com/watch?v=lr-NrroeTtA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 475 / 260 mm turning length: 1000 mm control: Heidenhain Manual Plus turret head: SAUTER 12 x VDI 30 3-jaw chuck: SCHUNK Rota S 250 spindle head: DIN 55026 A6 spindle bore: 78 mm Number of working hours: ca. 15.000 h total power requirement: 25 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 2 2 m Sonderpreis bei Übernahme ab Werk Aktueller, unklarer Defekt Steuerung fährt nicht hoch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 660 mm turning length: 1500 mm control: FAGOR centre height: 330 mm spindle passage: 82 mm number of spindle speeds: 30-2000 U/min bed width: 390 mm rapid speed: X/Z 4 - 8 m/min tailstock quill diameter: 75 mm Main spindle capacity: 15 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 3800 x 1800 x 2150 m First commissioned in 2015, very good condition - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mm swing diameter: 3500 mm turning height: 2000 mm faceplate speeds from - to: 100 UpM max. workpiece weight: 15 t main drive motor: 45/55 kW Control: Fanuc 18i-TB ram head dimension: 240 x 240 mm x-axis: -200 / +2950 mm z-axis: 1200 mm w-axis: 1000 mm feed range: 1 - 3000 mm/min rapid travel (x and z-axis): 1- 10000 mm/min total power requirement: - kW weight of the machine ca.: ca 70 t dimensions of the machine ca.: 10,8 x 6,95 x 7,15 m CNC vertical lathe - CNC control Fanuc 18i-TB - Face plate - 1 ram - Protective housing - Coolant system - 12-position tool changer (static tools) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mm turning length: 730 mm control: FANUC 21i rapid traverse: 15/24 mm/min spindle turning speed range: 4000 U/min spindle motor: 19 kW x-axis: 240 mm z-axis: 640 mm rapid travel (x and z-axis): 18 /24 m/min spindle bore: 66 mm tailstock quill taper MT: 5 tailstock quill stroke: 120 mm total power requirement: 50 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3 x 1,7 x 1,8 m - CNC control FANUC 21i-TB (with Manual Guide I) - hydraulic hollow clamping cylinder - 12-position tool turret, driven tools 4000 rpm, 2.8 kW - Tool monitoring - SMW Autoblok KNCS N225-65 chuck - C-axis (with disk brake for milling operation, Transmit software for end face machining and cylinder interpolation for shell machining) - B-axis - Tailstock (MK 5) - Chip conveyor - Coolant system with high-pressure pump - Parts catcher - Radial and axial milling heads Translated wi ...
turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), - Chuck SMW Autoblok dia 220mm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 € : 1650.92 € : 540 mm : 1500 mm : 85 mm : 310 mm : 350 mm : D1-8 : 1/20 MK : 3 : 27 - 2250 1/min : 5000 mm/min : 8000 mm/min : 280 mm : 75 mm : 5 MK : 190 mm : 9 / 13,5 (S1 / S6 40%) kW : 0.02 mm : 0.016 mm : ISO3655 : 3340 mm : 1905 mm : 2235 mm : 3400 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 77850 € : 1471.37 € : 460 mm : 1000 mm : 56 mm : 230 mm : 350 mm : D1-6 : 1/20 MK : 3 : 33 - 3100 1/min : 5000 mm/min : 8000 mm/min : 280 mm : 75 mm : 5 MK : 190 mm : 9 / 13,5 (S1 / S6-40%) kW : 0.02 mm : 0.01 mm : ISO3655 : 2840 mm : 1905 mm : 2235 mm : 2900 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software With precision bearings ensuring spindle runout of less than 0.005 mm, for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis. 2-axis ...
MONFORTS KNC 5 1500 ist eine CNC-Drehmaschine (Zyklendrehmaschine) für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenhöhe 250 mm, Spitzenweite 1500 mm, Dreh-Ø über Planschlitten 290 mm, über Bett 500 mm, Planweg (X) 265 mm, Pinolenhub 160 mm (Ø 80 mm). Technische Daten: Spindel 3 Stufen 3–2800 t/min, Eilgang X 5 m/min Z 10 m/min, Spindelmotor 16,5 kW, Anschluss 3x 400 V 50 Hz, Gesamtleistung 16 kVA, Gewicht ca. 3000 kg. Zubehör: 3-Backenfutter ROTA-S Ø 250 mm, 4-Backenfutter Ø 250 mm, weiche/harte Backen, mitlaufende Lünette, Reitstock, Kühlmitteleinrichtung, RS232, Späneförderer, Satz Stahlhalter, Werkzeughalter. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Feinmechanik und Werkzeugbau. Technische Daten ohne Gewähr
TRAUB TNL 18P ist eine CNC Langdrehautomat, gebaut für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehlänge 180 mm, Stangendurchmesser max. 20 mm; FMB minimag 20 Lademagazin für 2–23 mm bis 4200 mm. Hauptdaten: 7 Achsen, 2 Spindeln; Längsweg Z 205 mm (Z-Achse 250 mm), X 120 mm, Y -20/+40 mm; Hauptspindel bis 8000 min-1, Gegenspindel bis 6400 min-1; Spindelleistungen 2.2/3.7 kW und 1.5/2.5 kW; Gesamtbedarf 24 kVA; Gewicht ~4000 kg; Abmessungen 2500×1460×2250 mm. Zubehör: Hochdruck-Kühlmittel 30 bar, Wasserkühler, Papierfiltration, Reduzierhülsen, Führungsbuchse, Fräsapparat, Werkzeugvoreinstellung, Lampe, Löschsystem. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
maximum number of results exceeded
please refine your search
