cnc turning lathes used for sale

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Mistfilter not included! Auction-ID: A1-50690-9

Auction-ID: A1-50690-8

Machine is equipped with: - chip conveyor - tailstock - 254mm chuck Auction-ID: A1-50690-14

Machine is equipped with: - chip conveyor - tailstock - 4 jaw chuck Auction-ID: A1-50690-4

Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10

Machine is equipped with: - tailstock Auction-ID: A1-50690-23

CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA  ...

X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.

Table size 900x560mm, 24 pieces tool holder (empty), 24kVa, with air filter Auction-ID: A1-50476-1

Milling machine Cincinnati Milacron Sabra 750 BJ 1998

X-axis: 293mm Z-axis: 1350mm Y-axis: -65° ~ +65° C-axis: 0,001° Machine us equipped with: - live tooling (5,5kW, 5000rpm) - Y-axis - tailstock - steady rest - chip conveyor - tool setter - coolant filtration system Auction-ID: A1-50690-1

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-24

Specifications: X-axis: 400mm Y-axis: 560mm Z-axis: 400mm A-axis: +120° ~ -30° C-axis: 360° Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler - 40 position ATC Auction-ID: A1-50690-18

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-22

Machine is equipped with: - Macro’s - Rotation and scaling - Rigid Tapping - Tool Center Point Control & Dynamic Work Offsets - M19 Spindle Orientation - High Speed Machining - Visual Programming System - Media Display - 4th Axis Drive - 5th axis Drive - 1GB Memory - Wireless Networking - Compensation Tables - Through Spindle Coolant - 15.000 RPM Spindle Auction-ID: A1-50690-5

Machine is equipped with: - Macro’s - Rotation and scaling - Rigid tapping - M19 spindle orient - High speed machining - VPS editing - Media display - Max. Memory 1GB - Compensation tables - Through spindle coolant - 15.000rpm spindle - chip conveyor - oil mist filter - large coolant tank - 2 vices - Vacuum zero-point clamping system - Probe system - 15 HSK-63A Tool holders Auction-ID: A1-50690-2

FANUC Series 18i-TB control, with TOP AUTOMAZIONI FU350SX bar feeder - year 2024 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-21

12-position turret, 500GH spindle, MORI SEIKI MSD-501II control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-14

DL-35M motorized turret, FANUC Series Oi-TF control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-13

FANUC Series 32i-MODEL B control, with bar feeder TOP AUTOMAZIONI XF365 Excluding machining supports, tools and above-machine air filter AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-20

A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement.

sheet width: 6500 mm plate thickness: 3 mm back stop - adjustable: 1000 mm dimensions: 7300x2400x2300 mm Weight: 20000 kg Equipment/accessories: - 1 x set of knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STIGAL DYNAMIC plasma-gas cutting machine was built in 2014 in Poland by STIGAL Marcin Stępień. The machine is used for the precision cutting of sheet metal with a maximum thickness of 60 mm. The cutting process is performed automatically on a work table with dimensions of 3000 x 2000 mm. The CEBORA PLASMA PROF source generates a stable plasma arc, which ensures effective cutting of the material and maintains optimal operating parameters even during intensive use. A spark shield is installed next to the plasma torch to protect the eyes of the operator and anyone else in the vicinity of the operating machine. Thanks to this, the operator can carry out their work without the need to wear safety glasses during most of the cutting process. The shield is raised and lowered directly from the control panel. Fumes and dust generated during cutting are removed by an electronically control ...

Key data: 3000 mm, 1500 mm, 10000 W

10 kW fiber laser from Bystronic, which will be available from 01.02.2027. We sell our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production facility – no dealer, no intermediate margin. The system runs in our production until handover. So you can visit it under power and see it cut with your own parts before you decide. WHY THIS MACHINE • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminum up to 30 mm, brass 15 mm, copper 12 mm – one machine for everything from thin sheet to thick sheet • Dynamic Edition: 120 m/min parallel to the axis, 170 m/min simultaneously – high throughput in series and for urgent orders • Automatic nozzle changer with 64 positions + Detection Eye: set-up times reduced, low-manpower production possible • Changing table (25 s table change): loading and unloading while the machine is cutt ...

USED KITAMURA KNC 250YS CNC Lathe Main Spindle Bar Diameter: 42 mm Spindle Nose Type: A2-5 Spindle Power: 7.5 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Counter Spindle Spindle Power: 3.7 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Turret 1 Turret / 12 Stations with Rotating ToolsAxis strokes: X = 160 - Y = 70 - Z = 260 mm Equipped with 1 FANUC 18i-T CNC 1 Parts recuperator 1 Chip conveyor 1 Set of fixed and rotating tool holders 1 IEMCA BOSS 542 bar feeder Machine dimensions and weight : 3800x2000xH1800mm - weight 4000kg + 1 pallet 200kg Auction-ID: A1-50950-34

USED BIGLIA B436 Y2 CNC lathe Serial No.: 11804 Year: 2013 Main spindle Bar diameter: 36 mm Max. turning diameter: 100 mm Max. turning length: 100 mm Spindle bore: 46 mm C-axis: 360° indexing increment 0.001° Sub-spindle Maximum bar diameter: 36 mm Max. turning diameter: 100 mm Max. turning length: 100 mm Max Spindle Speed: 7000 RPM Spindle Bore: 46 mm C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 12 Number of Motorized Positions: 12 Axis Travel: X: 85 mm - Y: +25/-25 mm - Z: 300 mm Lower Turret Number of Positions: 12 Number of Motorized Positions: 12 Axis Travel: X: 85 mm - Y: +25/-25 mm - Z: 300 mm Equipped with 1 MITSUBISHI M700 CNC 1 Clamping on the main spindle and on the sub-spindle 1 Parts retrieval belt 1 Tool measuring arm 1 Muller 70 bar HP pump 1 Set of fixed and rotating tool holders 1 Chip conveyor 1 IEMCA BOSS 545E bar feeder Dimensi ...

USED OKUMA SPACE TURN LB3000 EX CNC Lathe Year: 2008 Main spindle Max turning diameter: 470 mm Spindle bore: 80 mm Spindle speed: 4200 RPM C-axis: 360° indexing increment 0.001° counter-spindle spindle diameter: 80 mm spindle speed: 4,200 rpm C-axis: 360° indexing increment 0.001° Turret 1 Turret / 12 stations with rotating tools Axis strokes : X=260 - Y=120 - Z=510 mm Equipped with 1 CN OKUMA OSP-200L 1 Tool measuring arm 1 Set of fixed and rotating tool holders 1 Chip conveyor 1 IEMCA MASTER 880 MAESTRO bar feeder Machine dimensions and weight : 2800x2000xH2500mm - weight 6500kg - conveyor:4200x600xH1400mm - weight 500kg - Bar feeder:4500x800xH1400mm - weight 1200 kg + 1 euro pallet 200 kg Auction-ID: A1-50950-62

USED NAKAMURA WT 100 CNC lathe Serial No.: M102006 Year: 2006 Main spindle Max bar diameter: 42 mm Max turning diameter 190 mm Max turning length: 503 mm Spindle nose: A2-5 Spindle speed: 6000 rpm Spindle power: 11/7.5 kW C-axis: 360° 360° indexing in 0.001° incrementsSpindle counter spindle Nose: A2-5 Spindle speed: 6000 rpm Spindle power: 11/7.5 kW C-axis: 360° 360° indexing in 0.001° increments Upper turret Number of positions: 12 Number of motorized positions: 12 Travels: X: 135 mm Y: +/-31mm - Z: 503mm Lower turret Number of positions: 12 Number of motorized positions: 12 Travels: X: 135mm - Z: 503mm Equipped with 1 FANUC 31i-MODEL A NC1 Set of tool holders 1 Loading and unloading table 1 Chip conveyor 1 FANUC M-10ia-7L Robot Dimensions and machine weight : 4000x2000xH1800mm - weight 5500kg + 2 pallet europe 1200x800xH1500mm total weight 600 kg + 1 pallet 2500x1000x15 ...

USED BIGLIA B445 S2M CNC Lathe Serial No.: 8272 Year: 2005 Main spindle Max bar diameter: 45 mm Max turning diameter: 240 mm Max turning length: 320 mm Spindle nose: ASA5 Spindle speed: 5000 rpm Sub-spindle Spindle nose: ASA5 Spindle speed: 5000 rpm Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Equipped with 1 FANUC 18i-TB CNC 1 Parts reclaimer 1 Chip conveyor Dimensions and weight Machine:4800x2000xH2000mm / weight: 5000 kg Auction-ID: A1-50950-3

USED NAKAMURA SUPER NTM3 CNC lathe Serial No.: L152501 Year: 2011 Main spindle Bar diameter: 65 mm Max turning diameter: 190 mm Spindle speed: 4500 rpm Spindle power: 15 kW C-axis: 0.001° indexing increment Spindle Spindle nose: A2-6 Spindle speed: 5000 rpm C-axis: 0.001° indexing increment Left upper turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167.5mm - Y=102 mm Z=250 mm Upper right turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167.5mm - Y=102 mm Z=250 mm Lower right turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167,5mm - Z=685 mm Equipped with 1 FANUC 16i-TB NC 2 HP pumps 1 Set of fixed and rotating tool holders 1 CNC parts collector 1 Chip conveyor Dimensions and weight 6000x2400xH2300mm - weight 12,000 kg Auction-ID: A1-50950-58

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C691.04 Year: 2004 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 SIEMENS SINUMERIK CN Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-17

USED TORNOS ENC 16 CNC lathe Serial No.: 58145 Year: 1990 Equipped with 1 SIEMENS SINUMERIK CN Rotating tools 1 TORNOS bar feeder Machine dimensions and weight : 2300x1200xH1600mm - weight 2500kg - bar feeder: 5000x700xH1300mm - weight 800kg Auction-ID: A1-50950-76

USED GHIRINGHELLI GRINDING MACHINE TYPE M200 CNC4A Serial No.: C679.03 Year: 2003 Working wheel Outer diameter of the grinding wheel: 500 mm Equipped with 1 CN SIEMENS SINUMERIK Number of CNC axes: 4 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle control wheel2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-18

Used NAKAMURA Super NTJ CNC Lathe Year: 2011 Main spindle Bar diameter: 65 mm Max turning diameter: 190 mm Spindle nose: A2-6 Spindle power: 15 kW Spindle speed: 4,500 rpm C-axis indexing: 0.001° Counter-spindle Bar diameter: 51 mm Spindle nose: A2-5 Spindle power: 11 kW Spindle speed: 5,000 rpm C-axis indexing: 0.001° Stroke: 760 mm Upper left turret Number of positions: 24 Number of motorized positions: 24 Axis travel: X=345 mm - Y=+/- 45 mm - Z=1240 mm Rotating tool speed: 6,000 rpm Rotating tool power: 5.5 kW B-axis travel: +/- 91° Indexing accuracy: 0.001° Lower right turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167.5 mm - Z=685 mm Rotating tool speed: 6,000 rpm Rotating tool power: 5.5 kW Equipped with 1 FANUC 18i-TB CNC 1 Collet chuck on the main spindle 1 Ø160mm chuck on the sub-spindle 1 Set of fixed and rotating tool holders 1 Tool ...

USED CORTINI T 120 C CNC LATHE Serial No.: T120019 Year: 1998 1 Main spindle with C-axis Bar diameter: 28 mm 1 8-station turret with rotating tools Equipped with 1 FANUC 21i-T CNC 1 Programmable tailstock 1 LNS HYDROBAR hydraulic tube Dimensions and weight Machine: : 2400x1400xH1600mm - weight 2500 kg - LNS tube: 4700x800xH1200mm - weight 450kg Auction-ID: A1-50950-10

STUDER S-50 CYLINDRICAL GRINDING MACHINE RETROFITTED Serial No.: 511419 Year: 1988 Bench grinding diameter: 450 mm Wheel dimensions: ∅ outside 750 width 80 mm Distance between tips: 1600 mm Longitudinal stroke: 1600 mm Effective stroke transverse axis: 200 mm Rotational speed: 16-650 rpm Tilting wheel Weight: approx. 7000 Kg Equipped with 1 Complete retrofit of the NC part and motorization in FANUC Oi-TD 1 Tailstock 1 Cooling system with magnetic separator and paper filtration Dimensions and weight Machine: 4700x2600xH2100mm - bin: 1600x1200 - cabinet: 600x1500mm - 1 pallet - weight 10 000kg Auction-ID: A1-50950-73

USED FAMAR ERGO 250 CNC lathe Serial No.: 20.68 Year: 2001 Machinable part Diameter: 200mm Max. length on turret: 125 mm Max. tool block length: 200 mm Axles Axis strokes: X: 340 - Z: 215 mm Fast feeds: X: 60 - Z: 30 m/min Ball screw diameter: 40 mm Spindle Spindle nose: 6\" Spindle power S6: 30 kW Speed: 6000 rpm Max centering diameter: 350 mm Equipped with 1 CN SIEMENS SINUMERIK 1 Chip conveyor Dimensions and weight Machine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

USED MORI SEIKI NZ2000 T2Y CNC LATHE Year: 2010 Number of cutting hours: approx. 19,500 hours Main spindle Bar diameter: 65 mm Max. turning diameter: 310 mm Max. turning length: 810 mm Spindle nose: JIS A2-6 Spindle bore: 73 mm Spindle power: 25/22 kW Spindle speed: 5000 rpm C-axis: 360° Indexing Increment 0.001° Counter Spindle Bar Diameter: 65 mm Spindle Nose: JIS A2-6 Spindle Bore: 73 mm Spindle Speed: 5000 RPM C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 16 Number of Motorized Positions: 16 Axis Travel: X=210 mm - Y=110 mm - Z=300 mm Lower Turret Number of Positions: 16 Number of motorized positions: 16 Axis stroke: X=210 mm - Y=110 mm - Z=810 mm Equipped with 1 CN MORI SEIKI MSX 701 IV 1 Clamping in collet on both spindles 1 Tool measuring arm 1 Workpiece retrieval arm 27 Fixed tool holders 1 Rotating tool holder 1 Chip conveyor 1 IEMCA MASTER  ...

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C759.07 Year: 2007 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 CN SIEMENS SINUMERIK Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-15

The auction includes: - Index V250 CNC Vertical Lathe with Control Cabinet - Knoll 320 Hinged Belt Conveyor - Knoll HF 100/530 coolant system - Knoll TF40-75/07 Centrifugal Pump - LTA II R/H Solid Extraction System All other devices visible in the pictures are not part of the auction. Auction-ID: A1-51071-2

Used Centerless grinding machine LIDKOPING 46 Working wheel Ø Exterior: 508 mm Width: 610 mm Control wheel Ø Exterior: 330 mm Width: 610 mm Thread work Plunge work CNC motor 0.001 Equipped with 1 Control cabinet with PLC SIEMENS 1 CNC plunge on the working wheel 1 CNC motor on the control wheel1 External lubrication pump tray 2 Hydraulic diamond cutters 1 Batten holder for working in a row Dimensions and weight Machine: 3800x2100xH1600mm - Electrical cabinet: 1000x400xH1700mm - 1 pallet - total weight 8500 kg Auction-ID: A1-50950-37

5-axis universal machining centre, Hermle Siemens CNC control (control panel with TFT screen) Round/swivel table integrated Tool magazine available Full protection cab Electronic handwheel Coolant Setup Machine Light CE marking Auction-ID: A1-51071-7

USED BIGLIA B445 S2M CNC LATHE Serial No.: 6922 Year: 2001 Main spindle Max. bar diameter: 45 mm Max. turning diameter: 240 mm Max. turning length: 320 mm Spindle nose: ASA5 Spindle speed: 5000 rpm Sub-spindle Spindle nose: ASA5 Spindle speed: 5000 rpm Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Equipped with 1 FANUC NC 1 Clamping on the main spindle and on the sub-spindle 1 Workpiece recuperator 1 Chip conveyor 1 IEMCA BOSS 545E bar feeder Dimensions and weight Machine: 4800x2000xH2000mm - Bar feeder: 4000x800xH1300mm - Total weight: 5800 kg Auction-ID: A1-50950-2

USED HARDINGE CONQUEST 42 CNC lathe Bar diameter: 42 mm Diameter above the bed: 269 mm Diameter above the carriage: 180 mm Distance between tip: 350 mm 1 Main spindle with C axis Spindle speed: 50 to 5000 RPM Stroke: X 135 mm - Z 353 mm 1 Turret / 12 stations Equipped with 1 FANUC O-TC CN 1 Programmable counter point 1 Chip conveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight : 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

USED HARDINGE GT-CE CNC LATHE Serial No.: GT-753-B Main spindle Bar diameter: 27 mm Diameter above bed: 300 mm Spindle nose: A2-4 Spindle power: 3.7 kW Spindle speed: 60-6000 rpm Axle travel: X=281 mm - Z=304 mm Equipped with 1 FANUC 18-T CNC Dimensions and weight 1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C733.06 Year: 2006 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 SIEMENS SINUMERIK CN Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-16

USED CITIZEN M32 CNC lathe Bar diameter: 32 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Machine weight approx.: 3200 KG Equipped with 1 CN MITSUBISHI MELDAS 1 Lubrication pump tank 1 Fire suppression system 1 Hydrofluid HP pump unit Dimensions and weight Machine: 4000x2000xH1800mm - Weight 3500kg + 1 pallet 600x600 Weight 200kg + 1 Pallet 1200x1200mm Weight 250kg Auction-ID: A1-50950-9