136,819 used machines on RESALE, but how to find them? Machine Search
Manufacturer: HEAD / KENT Model: CUV-10 (KMV 10) Year: 1999 Robust CNC vertical machining center, Meehanite cast iron construction, suitable for machining single parts and small to medium series. Numerical control: FANUC OMD Structure: Meehanite cast iron Turcite B-coated slides Rigid thread Portable electronic crank Full protective guard Sprinkler system Work light and end-of-cycle lamp Toolbox Races: X: 1,020 mm Y: 510 mm Z: 510 mm Distance between spindle nose and table: 105 to 740 mm Table: Dimensions: 1,200 × 600 mm T-slots: 18 mm – 3 grooves Max. permissible load: 1,000 kg Spindle: Speed: 30 – 7,500 rpm Transmission: ZF gearbox – 2 ranges Cone: BT 40 Engine power: 11 kW Feeds: Fast feed (X,Y,Z): 24 m/min Working feed: 1 – 10,000 mm/min Tool changer: Capacity: 20 tools Max. tool weight: 6 kg Bidirectional selection Machine dimensions: 2,880 × 2,420 × 2,980 mm Floor space ...
CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4011
CNC control: MSX-850 III Number of axes: 2 Strokes: X = 260 mm, Z = 590 mm Spindle speed: 50 – 5000 rpm Power: 15 kW Bar capacity: Ø 65 mm Spindle bore: 73 mm Turret : 12 stations (BMT) Max turning diameter: 356 mm Max turning length: 510 mm Chip conveyor: yes 235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4004
- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27
Machine is equipped with: - chip conveyor - tailstock - foot pedals - tooling as showed in pictures Auction-ID: A1-50690-15
- Total installed power approx. 22 KW. - Usable working area approx. 4000 x 1400 mm. - Maximum travel speed in x-y-z directions: 100-100-25 m/min. - Axis C. - Tool magazine with 6 positions. - Electrospindle: power 11 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder. - Adjustable saw group. - Vertical holes in the x-axis direction: 10. - Vertical holes in the y-axis direction: 8. - Horizontal holes in the x-axis direction: 2 + 2. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 benches with 8 suction cups in total. - Vacuum pump NASH_ELMO 2BL2141-2AH50-4A-Z with a capacity of 100 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-26
- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23
CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-50718-59
- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-18
- Total installed power approx. 15 KW. - Usable working area approx. 2900 x 1000 mm. - Passage height on panel 180 mm. - X-axis travel: 3300 mm, y-axis travel: 1280 mm, z-axis travel: 200 mm. - Maximum travel speed in x-y-z directions: 67-67-22 m/min. - Electrospindle with manual tool change. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 5. - Vertical holes in the y-axis direction: 6. - Horizontal holes in the x-axis direction: 1 + 1 (HEAD IS MISSING). - Horizontal holes in the y-axis direction: 1 + 1. - ESA KVARA 6 numerical control. - Remote control panel. - 6 benches with 14 suction cups in total. - BECKER vacuum pump. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-14
- Total installed power approx. 60 KW. - Dimensions of the aluminium work table approx. 6700 x 1570 mm. - Z-axis travel 340 mm. - Tool magazine with 12 positions. - Electrospindle: power 7.50 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 5. - Automatic lubrication. - Numerical control NUM. - Remote control panel. - BECKER VTLF 250 vacuum pump with a capacity of 248 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-1
THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-7
Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Auction-ID: A1-50690-11
Program run 5700 h, spindle hours 4800 h, spindle holder ISO 40, internal coolant supply, Heaxgon touch probe, without NC clamp Auction-ID: A1-50626-15
Machine is equipped with: - live tooling - C-axis - chip conveyor - tailstock - tool setter - tooling in turret as showed in picture Auction-ID: A1-50690-12
CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg Auction-ID: A1-50718-55
Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Mistfilter not included! Auction-ID: A1-50690-9
Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-50718-6
Machine is equipped with: - chip conveyor - tailstock - 254mm chuck Auction-ID: A1-50690-14
Machine is equipped with: - chip conveyor - tailstock - 4 jaw chuck Auction-ID: A1-50690-4
CNC – Transl. Machining Centre Inv. No. 10.653MM Make UNISIGN Model Univers 4 Control Siemens Sinumerik 810D Travel X (Longitidinal) 1,600 mm Y (Cross) 400 mm Z (Spindle Height) 400 mm Taper ISO 40 Table 700 x 400 mm Load 600 kg Distance Spindle Nose to Table 150-550 mm R.P.M. 9.000 Main spindle kW 14 Rapid Traverse X,Y,Z 5-28,000 mm/min. Feed rate X,Y,Z 28,000 mm/min. A.T.C. 44 pos. Auction-ID: A1-50718-20
Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10
CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA ...
Machine is equipped with: - tailstock Auction-ID: A1-50690-23
CNC HORIZONTAL MACHINING CENTER Inv. No. 12.178MM Make TOYODA Model LINEAM III Control MELDAS M650 Year 2004 TABLE Pallet size 450 x 450 mm Max. load on pallet 400 kg Table indexing increment 0.001 degrees STROKE X-Axis stroke 630 mm Y-Axis stroke 630 mm Z-Axis stroke 700 mm Distance from spindle center to top of pallet 50 – 680 mm Distance spindle nose /center rotary index table 50 – 680 mm FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20,000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2.5 sec. DRIVE MOTOR Spindle drive motor Ac 45/30 kW MACHINE WEIGHT & POWER REQUIREMENTS Machine weight 15.000 kg Power requirement 96 kVA ACCESSORIES: Spindle linear mo ...
CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50 Auction-ID: A1-50718-51
X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.
X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.
Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.
sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.
- Includes cabinet and electronic components. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-66
Table size 900x560mm, 24 pieces tool holder (empty), 24kVa, with air filter Auction-ID: A1-50476-1
- Mobile bridge. - Total installed power approx. 40 KW. - Dimensions of the work table approx. 3650 x 1560 mm. - Z-axis travel: 250 mm. - Maximum workpiece height 150 mm. - Programmable maximum speed in x-y-z directions: 75 -75 -15 m/min. - Tool magazine with 10 positions. - Electrospindle: power 8.50 KW, automatic tool change, for HSK F63 tool holder. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 9. - Vertical holes in the y-axis direction: 5. - Horizontal holes in the x-axis direction: 1 + 0. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 suction cups are included. - 2 x BECKER VTLF 2.250/0 vacuum pumps with a capacity of 244 m³/h each. - Cutting tools and accessories are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The cost ...
- Total installed power 31.50 KW. - Usable working area approx. 2910 x 1310 mm. - Passage height on panel 200 mm. - X-axis travel: 3100 mm, y-axis travel: 1750 mm, z-axis travel: 300 mm. - Programmable maximum speed in x-y-z directions: 25-25-15 m/min. - Tool magazine with 8 positions. - HSD ES919 electrospindle: 8KW-max power. 24000 rpm, automatic tool change, for ISO 30 tool holders. - Grooving saw group. - ISAC SAB 2001 E numerical control. - Windows software. - 6 benches. - 4 lifting modules for heavy parts. - 1 x BECKER U 4.165 SA/K vacuum pump with a capacity of 160 m³/h. - 1 x BECKER KVT 3.140 vacuum pump with a capacity of 132 m³/h. - 1 x PUSKA air tank, capacity 150 litres. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction- ...
• Serial number AA1/013786 • Working table dimensions 3050 x 1200 mm • Panel passage height 280 mm • Travelling way X-axis: 4420 mm, Y-axis: 1720 mm, Z-axis: 400 mm • Maximum travel speed in the axes direction x-y-z: 105-80-25 m/min • Tool magazine with 12 positions • Electrospindle: power 11 kW, max, 18000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit with 2,20 kW motor • Vertical drilling spindles in X-axis direction: 5 • 2 heads for horizontal drills • NUM POWER 1040 numerical control • Software Windows / Xilog Plus • RIETSCHLE VTB 250 vacuum pump with capacity 250 m³/h • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-34
- Includes: - 6 JOUCOMATIC pneumatic cylinders. - Approximately 34 solenoid valves. - Pressure regulator with pressure gauge and filter. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-69
- Includes: - 2 control pedals, transformers, resistors, relays, limit switches, power supply, valves and various accessories. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-65
Milling machine Cincinnati Milacron Sabra 750 BJ 1998
X-axis: 293mm Z-axis: 1350mm Y-axis: -65° ~ +65° C-axis: 0,001° Machine us equipped with: - live tooling (5,5kW, 5000rpm) - Y-axis - tailstock - steady rest - chip conveyor - tool setter - coolant filtration system Auction-ID: A1-50690-1
FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-24
Specifications: X-axis: 400mm Y-axis: 560mm Z-axis: 400mm A-axis: +120° ~ -30° C-axis: 360° Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler - 40 position ATC Auction-ID: A1-50690-18
- Batch of electronic components. Includes: - 1 numerical control NUM. - 3 GEC ALSTHOM electronic drive modules. - 1 LS 12.2 kVA frequency inverter. - 1 OMRON 1.5 kW frequency inverter. - 1 bank of relays and connection terminals. - 2 SIKO encoders. - Pneumatic components, including regulators with pressure gauge, valves, cylinders, fittings and accessories. - 1 desktop computer. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-77
OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-22
Manual 4th +5th axis Swivel-Tilt table Machine can work horizontally as well as vertically. Head with drill pinole Rapid walking 5 mtr/min. SK 40 hydr pull-on device Hor + Vert. ISO 40 Image DIN 69871/1 New keyboard Portable control (electronic handwheel) Auction-ID: A1-47366-146
Disassemble yourself, Forklift present 2 tons. Auction-ID: A1-47366-135
Machine is equipped with: - Macro’s - Rotation and scaling - Rigid Tapping - Tool Center Point Control & Dynamic Work Offsets - M19 Spindle Orientation - High Speed Machining - Visual Programming System - Media Display - 4th Axis Drive - 5th axis Drive - 1GB Memory - Wireless Networking - Compensation Tables - Through Spindle Coolant - 15.000 RPM Spindle Auction-ID: A1-50690-5
maximum number of results exceeded
please refine your search
2.000 € 
