136,841 used machines on RESALE, but how to find them? Machine Search
x-travel: 2000 mm y-travel: 1250 mm z-travel: 1108 mm turning speeds: 60 - 4000 U/min spindle motor: 38 / 24 kW tool taper: SK 50 tool change unit: 40 Pos. table surface area: 1600 x 1250 mm table load: 7 t c-axis: +/- 120 ° B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,5 x 4 x 2,9 m 5-axis machining center with - CNC control Heidenhain iTNC 530 - NC rotary table with B-axis - Automatic swivel milling head (C-Axis) - 40-fold tool changer (SK 50) - Electronic handwheel - 2 Chip conveyor - Coolant device 30 l/min - Coolant through Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
x-travel: 1250 mm y-travel: 500 mm z-travel: 500 mm Control: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mm y-travel: 2500 mm z-travel: 1000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2300 mm rapid travel x/y/z: 15/12.000 mm/min feeds: 5.000 mm/min tool taper: ISO 50 number of spindle speeds: 5000 U/min/rpm Spindle power: 30 kW table weight: 10 t handwheel: HR- 410 weight of the machine ca.: 31 t dimensions of the machine ca.: 11 x 3,44 x 4,9 m - CNC control Heidenhain iTNC 530 - Tool changer 30-fold (ISO 50) - Milling head CH -45 - Coolant through spindle - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; it can be tested by prior arrangement.
: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...
Key data: 50 t
Manufacturer: AMADA Model No.: HFT 50-20 Year: 2006 Condition: Used Stock number: 9544 Compressive force: 50 t Maximum bending length: 2085 mm Maximum distance between columns: 2665 mm Axis: 4 Throat depth: 420 mm Maximum ram stroke: 200 mm Machine weight: 4850 kg
Key data: 100 t, 2500 mm, 2050 mm
Hydraulic press brake HACO ERM 25100 Year of Make: 2005 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Type A tool holder Back gauge: Controlled X-R-Z1-Z2 axles New control system 2026! Immediately available! To be viewed under power!
Key data: 130 t, 3000 mm
Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.
Stock No.: 4053 MACHINING CENTER Manufacturer: EMCO, Type: MMV 2000 Serial No.: M-20906019, Year of manufacture: 2017 Specifications: Table size 2400 x 950 mm Large table load 2200 kg Longitudinal movement (X) 2000 mm Transverse movement (Y) 800 mm Vertical movement (Z) 750 mm Spindle taper SK 40 ISO Spindle speeds 50-15000 rpm Spindle motor 46 B-axis angle +/- 120 angular degrees Tool Changer 40 Control Siemens 840 D SL Controlled in axles 4 Operating hours spindle 4488 hours Accessories: Cooling by spindle 20 bar Chip conveyance. Tool Measuring Dimensions: Length: 2886 mm, Height: 3277 mm, Width: 4450 mm, Weight: 22 kg
Key data: 3000 mm, 1500 mm, 6000 W
with Bytrans Extended
EMCO Hyperturn 665 MC PlusYear of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mmTurning length : 744 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:5.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Röhm KZZT-AF 65/6Subspindle:Technology:MotorspindleSpeed:7.000 rpmPower (max.):22 kWTorque (max.):130 NmWorkpiececlamping:3-Jaw chuck, Röhm KFD-HE 210Ejector:PneumaticMovement in Z:750 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:4.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:270/100/750 mmEilgang in X/Y/Z:24/10/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:4.000 rpm, 6,7 kW, 25 NmMovement in X/Z:205/750 mmEilgang in X/Z:24/30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal coolant pumps with High- ...
2x Chiron FZ 08 S, built in 1999/ 2000. Fully functional and ready for operation.
A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible.
This 3-axis SCM Morbidelli M220 CNC machining centre was manufactured in 2019. It features a working area of 5,510 x 1,620 x 180 mm and a powerful 15 kW liquid-cooled HSK 63F electrospindle with speeds up to 24,000 rpm. The machine includes a F29LTC drilling head with 17 vertical and 6 horizontal drilling units, as well as a high-performance vacuum clamping system. If you are looking to get high-quality machining capabilities, consider the SCM Morbidelli M220 machine we have for sale. Contact us for further details.
new
: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 € : 1867.32 € : 98800 € : 320 to : 3050 mm : 365 mm : 2600 mm : 750 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet ...
Key data: 50 t, 2000 mm
with 3-axis CNC control (Y, X, R) With Hydr. Foot pedal (with lock) incl. 1 set of bending tools (punches and dies) 3800 kg Loading onto truck included
The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.
MTRent MTCut V110TH - CNC milling machine - Mount: SK40 - X/Y/Z: 1100 / 610 / 610 mm - Heidenhain CNC control - Incl. milling tools, technical documents and operating instructions - Switch-on time: 21295 h - Spindle time: 6661 h - Year of construction 2015 Technical data Axles: - Travel X: 1100 mm - Travel Y: 610 mm - Travel Z: 610 mm - Rapid traverse X/Y/Z: 32 m/min - Feed: 1 - 12000 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Spindle nose table: 120 - 730 mm - Guides X/Y/Z: Linear 45 / 45 / 45 mm - Machine bed: cast iron Machine table: - Dimensions: 1250 x 610 mm - Max. table load: 900 kg - T-slots in the table: 5 - T-slots width: 18 mm H8 - T-slot spacing: 100 mm Spindle: - Speed: 10000 rpm - Torque (40% ED): 256 Nm - Power (40% ED): 24 kW - Spindle cooling: Oil - Tool holder: SK40 - Tightening bolts: DIN 69871/72 ...
Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended - Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Hand control - Fiber 4000 laser source - Cutting Parameter Wizard - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Suction device for leaf separation - Compressed air connection - Year of construction 2016 Included packages - Material specification package - Package Part Tolerances & Cutting Surface Quality - Cutting gas supply & cutting quality package
sliding headstock CNC lathe, year 2002, CNC Tsugami-Mori MSC-501. Used machine. More info & price on IndustrialBuyer.
sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition () - inspected condition - machine video - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP swiveling control panel, front right 2D graphic display for visualization and multi-simulation 2D graphic programming easy operation - CNC motorized backgauge travel range 10.0 - 1,600 mm pneumatic / retractable gauge fingers adjustment speed max. 250 mm/sec. rear sheet support table with brushes - motorized lower beam ...
Technical details Model: ШУ 322.21 (SHU 322.21) Type: CNC cylindrical grinding machine Configuration: - External cylindrical grinding spindle - Powered workhead - Tailstock with centre support - Hydraulic table movement - Automatic wheel feed - Swivelling wheelhead - Digital programmable controller - Operator control pendant - Separate electrical cabinet - Coolant system with filtration unit - Integrated hydraulic system Application: - External cylindrical grinding - Precision shaft grinding - Roller and pin grinding - General precision grinding operations Construction: - Heavy-duty cast-iron machine frame - Hydraulic table drive - Semi-automatic grinding cycles Estimated capacity: - Grinding diameter: Approx. 320 mm - Distance between centres: Approx. 1000–1500 mm Dimensions: - Length: Approx. 4200 mm - Width: Approx. 2100 mm - Height: Approx. 2100 mm ...
General Description Twin-opposed spindle CNC turning center manufactured by Shanghai SIO Electromechanical Technology Co., Ltd. , model FC-500 . Designed for high-productivity machining of shafts and similar components by enabling simultaneous or sequential machining from both ends. The machine is equipped with Siemens CNC control, hydraulic workholding and automatic chip removal. Technical Details Manufacturer: Shanghai SIO Electromechanical Technology Co., Ltd. Model: FC-500 Machine type: CNC twin-spindle turning center Year: 2019 Serial number: 20191011 Power supply: 400 V, 50 Hz Connected load: 25 kVA Twin opposed spindle configuration Siemens SINUMERIK CNC control Siemens SINAMICS servo drives INVT frequency inverters Hydraulic workholding system Automatic lubrication Chip conveyor Electronic handwheel (MPG) Precision linear guideways Ball screw driven axes ...
CMS Antares CNC Machining Center Industrial enclosed CNC machining center with CMS control interface, FANUC handheld operator pendant, enclosed working area, safety fencing, vacuum system, centralized pneumatic/lubrication equipment and auxiliary TEXA cooling unit. Manufacturer: CMS – Costruzioni Macchine Speciali Model: Antares Serial number: B954 Electrical supply: 400 VAC (−15/+10%), 50/60 Hz, 3+N Rated current: 54 A Short-circuit rating: 10 kA Distribution system: TN-S/TN-C Electrical diagram: CMSB954EL Control equipment: CMS control interface and FANUC handheld pendant Additional equipment: Vacuum system, centralized pneumatic/lubrication system and TEXA industrial cooling unit Condition: Used Approximate dimensions: 5,000 × 3,200 × 4,700 mm Approximate weight: 6,000 kg All descriptions are indicative only. Auction-ID: A1-50546-46
Year: 1998 Serial No.: 458-66 Type/Function: 4-Axis Vertical CNC Machining Center Configuration: 2 Pallets, 2 × 4th Axis Tsudakoma Numerical Control: SIEMENS Included Equipment: KNOLL Filter Unit, Chip Conveyor Auction-ID: A1-50714-4042
Technical details Manufacturer: AGIE Model: AGIECUT 200 Control system: AGIE CNC100 Type: CNC wire EDM machine Configuration: - CNC wire electrical discharge machining system - Dielectric working tank - Automatic wire feed system - Wire transport reels - Upper wire guide assembly - Flushing system with flow meters and pressure gauge - Hand pendant - Separate axis display - AGIE CNC control cabinet Application: - Precision machining of conductive materials - Tool and die manufacturing - Mould production - Precision component manufacturing - Profile cutting Construction: - CNC-controlled wire EDM technology - Integrated dielectric tank - Automatic wire transport system Dimensions: - Length: Approx. 2600 mm - Width: Approx. 2200 mm - Height: Approx. 2400 mm Weight: Approx. 3800 kg Condition: Used Observed condition: - Machine appears mechanically complete - ...
General Description CNC turning center manufactured by MASHSTROY , model CT 161 . Designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic chuck, programmable tailstock and fully enclosed machining area for production applications. Technical Details Manufacturer: MASHSTROY Model: CT 161 Machine type: CNC turning center Horizontal CNC lathe Hydraulic chuck 12-station turret Programmable tailstock Full safety enclosure Original CRT-based CNC control Chip conveyor / chip evacuation system Coolant system Original documentation included Condition Used industrial condition. The machine appears complete with hydraulic chuck, 12-station turret, programmable tailstock, chip conveyor, coolant system and original documentation. Operational status, spindle condition and CNC functionality have not b ...
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-50714-4045
Spacing of the points: 400 mm; tip height: 175 mm; maximum grinding diameter: 350 mm; workpiece weight: up to 80 kg between points / 120 kg in the air; X-axis: stroke 300 mm; Z-axis: stroke 485 mm; resolution 0.0001 mm; patented Studer preloaded hydrostatic guides; grinding wheel Ø500 x 63 mm, bore 203 mm; spindle motor grinding wheel 7.5 kW; grinding wheel speed 1,400 to 3,200 rpm; headstock orientation ±8.5°; workhead headstock with ISO 50 taper / MT5; workpiece speed 1 to 1,000 rpm; tailstock CM3, sleeve stroke 80 mm, sleeve diameter 50 mm; GE Fanuc Series 16i-T numerical control; shrouded machine with filtration unit and separate control cabinet Auction-ID: A1-50714-4013
AC power supply 220 V, 3PH, 50/60 Hz; control voltage AC 110 V / DC 24 V; rated current 75 A; installed power 35 kVA; spindle speed up to 6000 rpm; spindle nose ASA A2#5; spindle passage 53 mm; turret 12 VDI tools; tool dimensions 25 x 25 mm; boring bar Ø 40 mm; strokes X 242 mm / Z 440 mm; fast feeds X 20 m/min, Z 25 m/min; spindle motor 11 kW; axle motors X 1.4 kW / Z 2.8 kW; lubricating tank capacity 100 L; Max turning Ø 350 mm; Max turning length 425 mm Auction-ID: A1-50714-4033
General Description CNC sinker electrical discharge machine (EDM) manufactured by AGIE , equipped with an AGIEMATIC 4 CNC control and AGIEPULS pulse generator. Designed for precision machining of conductive materials using shaped electrodes, making it suitable for toolmaking, die manufacturing and precision component production. Technical Details Manufacturer: AGIE Model: Agiematic 4 Machine type: CNC sinker EDM Control: AGIEMATIC 4 Pulse generator: AGIEPULS ELESTA X/Y/Z digital axis display CRT operator terminal Dielectric work tank Dielectric filtration and circulation system Separate generator and electrical cabinets Integrated Z-axis ram head Condition Used industrial condition. The machine appears complete with AGIEMATIC 4 control, AGIEPULS generator, dielectric filtration system, work tank and electrical cabinets installed. Electronics show normal age-related we ...
Reichenbacher Hamuel ECO LT CNC Machining Center Enclosed CNC machining center with Siemens SINUMERIK control, Renishaw measurement/probing equipment, multi-axis machining head and integrated extraction/vacuum systems. Manufacturer: Reichenbacher Hamuel Model: ECO LT Year: 2022 Serial number: 4599 Power: 23 kW Electrical supply: 400 V, three-phase, 50 Hz ±5% Rated current: 49 A Input fuse: 50 A, Ipk ≤10 kA Control voltage: 24 V DC Control system: Siemens SINUMERIK Equipment: Renishaw measurement/probing system, enclosed working area, extraction/vacuum equipment and auxiliary compressed-air/vacuum system Certification: CE marked Condition: Used Approximate dimensions: 4,800 × 3,000 × 3,500 mm Approximate weight: 7,000 kg All descriptions are indicative only. Auction-ID: A1-50546-45
CNC vertical machining center for machining metal parts. CNC control: Fanuc 0M Strokes: X 850 mm / Y 440 mm / Z 630 mm Table: 940 × 400 mm Max. table load: 250 kg Spindle taper: BT 40 Spindle speed: 45 – 8,000 rpm Spindle motor power: 7.7 / 5.5 kW Tool changer: 22 positions Projection: 380 mm Total power: 10 kVA Voltage: 380 V Auction-ID: A1-50714-4058
Filiz H2216K CNC Fabric Cutting Machine Automated CNC cutting system for flexible sheet and fabric materials, equipped with a large vacuum cutting table, travelling gantry, motorised cutting head and material roll support/unwinding system. Manufacturer: Filiz Makine San. ve Tic. A.Ş. Model: H2216K Configuration: Vacuum cutting table, travelling gantry, motorised cutting head, roll support/unwinding system and cable carriers Controls: PC-based operator station with nesting and cutting software Additional equipment: Pneumatic components and emergency stops Condition: Used Approximate dimensions: 6,500 × 3,000 × 1,800 mm Approximate weight: 2,500 kg All descriptions are indicative only. Auction-ID: A1-50546-48
Manufacturer: OMEGA Year: 1990 Type: High-capacity CNC vertical machining center Numerical control: FANUC 15M Axes: 3-axis (X, Y, Z) Strokes: X 1650 mm / Y 850 mm / Z 790 mm Table: 1900 x 850 mm Spindle: BT50 – up to 6000 rpm – gearbox 2 ranges Tool magazine: 30 positions Weight: approx. 15000 kg Notes: Heavy duty CNC vertical machining center, suitable for intensive machining and large workpieces. Auction-ID: A1-50714-4046
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-50714-4043
General Description CNC wire electrical discharge machine (Wire EDM) manufactured by AGIE , model AGIECUT 200 . Designed for precision cutting of conductive materials using a continuously fed wire electrode, making it suitable for toolmaking, die manufacturing and precision component production. Technical Details Manufacturer: AGIE Model: AGIECUT 200 Machine type: CNC Wire EDM machine Control system: Agiematic-C Work tank Complete wire head Automatic wire feed system Dielectric tank Filtration and pump unit Hand pendant Condition Used industrial condition. The machine appears complete with Agiematic-C control, wire head, dielectric system, filtration unit and hand pendant. Operational status, axis accuracy and EDM performance have not been tested. Auction-ID: A7-50745-38
CNC Control: BROTHER CNC-A00 X/ Y/Z Axis Travels: 480 × 360 × 410 mm Table Dimensions: 600 × 300 mm Number of Tools: 14 Spindle Taper: BT30 Max. Spindle Speed: 16,000 RPM Spindle Motor Power: 7 kVA Drilling Capacities: Steel Ø 32 mm, Aluminum Ø 25 mm, Cast Iron Ø 25 mm Tapping Capacities: steel up to M16 Included equipment: 4 BT30 tool holders, lubrication tank with pump Weight (kg): 1800 Year & Manufacturer: 2007 – BROTHER Auction-ID: A1-50714-4014
Manufacturer: GILDEMEISTER Model: CTX 400 Series 2 Year: 1998 German-made 2-axis CNC lathe, robust and precise, suitable for turning single parts and small to medium series. CNC : HEIDENHAIN TURN PLUS Axes: 2 axes (X, Z) Turning capacities: Diameter above bed: Ø 570 mm Diameter above carriage: Ø 420 mm X-axis stroke: 220 mm Z-axis stroke: 635 mm Spindle: Bore: 79 mm Chuck diameter: Ø 250 mm Spindle speed: 25 – 5000 rpm Motor power: 21 kW Fast feeds: X-axis: 20 m/min Z-axis: 24 m/min Turret: 12 positions VDI 30 Equipment: automatic tailstock (Ø 80 mm), chip conveyor, parts collector Country of origin: Germany Condition: used Auction-ID: A1-50714-4035
CNC vertical machining center for machining metal parts. Numerical control: Hurco WinMax Axes: 4 axes (including 1 rotary axis) Strokes: X 660 mm / Y 355 mm / Z 457 mm Table: 762 × 355 mm Max. table load: 500 kg Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle power: 11 kW Tool changer: 24 tools (RANDOM type) Equipment: 1-axis divider with tailstock Auction-ID: A1-50714-4028
CNC lathe with bar feeder Dimensions: lathe: l - 3.2m, w - 1.6m, h - 1.7m bar feeder: l - 2m, w - 0.7m, h - 1.2m Auction-ID: A1-50595-65
Biesse Rover A3.30 CNC woodworking machining centre with Becker vacuum pump CNC woodworking machining centre with adjustable workpiece support beams and vacuum pods. Includes control cabinet with monitor, keyboard and mouse, separate pedestal control panel, foot controls, floor safety mats, safety fencing and machine-connected extraction hoses shown in the photographs. Visible dust accumulation and signs of wear. Included vacuum pump: - Brand: Becker - Type: PICCHIO 2200 - Year: 2007 - Serial number: 2157149 - Speed: 1,420 / 1,720 rpm - Motor power required: 1.8 / 2.5 kW - Inlet capacity: 90 / 108 m³/h - Vacuum: 130 / 130 mbar - Made in Germany Auction-ID: A1-50699-7
maximum number of results exceeded
please refine your search
2.800 € 
