136,160 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...
Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993
Key data: 700 mm, 5050 mm
CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation
The machine is in good technical condition, testing is possible by prior arrangement.
CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package
turning diameter: 320 mm turning length: 600 mm control: Fanuc Oi-TD spindle bore diameter: 74 mm number of controlled axis: 2 turning speed range: 3000 U/min rapid speed: 20 m/min number of tapers in turret head: 12 direkt tail stock: Ja power requirement: 15 kW weight: 5,0 t dimensions: 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 254 mm, 700 mm
Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition
faceplate diameter: 4000 mm swing diameter: 4200 mm turning height: 2000 mm workpiece weight: 50000 kg cross travel of ram-slide: 2300 mm slides vertical travel: 1250 mm swival range +/-: -15/+30 Grad faceplate turning speed range: 0,5 - 55 U/min Control: Fagor 8055i CNC total power requirement: 182 kW weight of the machine ca.: 134 t dimensions of the machine ca.: 5920 x 10200 x 8400 mm Machine overhauled in 2008 - CNC Control FAGOR 8055i - Tool C8 - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
turning diameter: 220 mm turning length: 450 mm control: Siemens 840 D main drive DC: 27 kW total power requirement: 27 + 8,5 + 5 + X kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 10 x 2 x 2 m Movie: https://www.youtube.com/watch?v=OffdO1J4G5Y The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder
Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg
Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg
Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma
max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg
CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine
Key data: 650 mm, 1500 mm
Double Spindle 5-Axis/7-Axis CNC Double Spindle Turning and Milling Center Okuma Multus U3000 1SW 1500 Year of construction 2021 OSP P300SA IGF-D CNC Controller Circumferential diameter over carriage 650 mm Turning diameter max. 1,500 mm Main spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Sub-spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Tool support: Single tool carrier in the work area Tools for turning (L) and milling (M) CAPTO C6 Tool Holder Milling spindle drive power 19/25 kW Milling spindle speeds 50 – 12,000 rpm. Tool magazine and automatic tool changer 80 tool magazine positions Axes/travels: Flat path X 645 mm Perpendicular travel (off-center) 250 mm Longitudinal travel Z 1,600 m ...
swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...
Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips
Manufacturer: DMG MORI Model: CTV 250 DF Year of Manufacture: 2019 Type of Machine : Power skiving machine / CNC Turning Center Max spindle speed: 6,000 rpm Secondary spindle speed: 7,000 rpm Machine weight: 7,000 kg Power supply: 400 V, 50 Hz, L1-L2-L3-N-PE phase Power consumption: 65 kVA Max current: 95 A Fuse: 100 A / 1.00 kA Max voltage: 440 V Control voltage: 230 V / 24 V Spare parts are available for sale separately Find more here - .ucymachines/ Contact us at - sales@ucymachines
CNC turning and milling center Okuma Multus B300II-W Control: OSP-P 300SA Year of Make: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis with stroke: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40-fold Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. pump 20 bar - Preparation for in-process measurement - Tool height correction in Y-axis for turning tools - Hi-Cut Pro high-speed control
HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...
turning diameter: 340 mm turning length: 1000 mm control: Mazatrol SmoothC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 32 mm, 32 mm, 320 mm
Stock number: 4010 CNC lathe SWISS TYPE Manufacturer: TSUGAMI, Type: BO326E-II - 2016 Machines NO.: 23031A, Year of manufacture: 2016 Specifications: Size capacity 32 mm Ø Ma. turning length (fixed guide bush) 320 mm Ma. Turning length (Rotary guide bush) 70 mm Max. threading force of the main spindle M 10 Max. speed drilling capacity 12 mm Main spindle effect 3.7/5.5 kw Sub-spindle Sub spindle speeds 8000 rpm Spindle bore 32 mm Driven tool transformer 6000 ( 4800) - 1 kW pr/min Subspindle effect 2.2/3.7 kw Control Fanuc 32i-B Fabr. Axis Controlled X1-X2-Z1-Z2-Y1-Y2 Opreation time 6575 hours Length: 2400 mm, Height: 2000 mm, Width: 1500 mm, Weight: 3500 kg
Inv. Num. : 9085 Type: KMX XL 32 Producer: Manurhin Created: 2003 Parameters: Maximum turning length: 330 mm Max. turning diameter: 33 mm Length: 3850 mm Width: 2000 mm Height: 2100 mm Weight: 6000 kg
turning diameter: 500 mm turning length: 1000 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9089 Type: CT 40/1000 Producer: Gildemeister Created: 1991 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 225 mm Spindle diameter: 56 mm Weight: 3200 kg Equipment: Chip conveyor Tailstock Spare parts Shovel Powered tools
DMG MORI CL2000A CNC turning center was built in 2017 in Japan by DMG MORI CO., LTD. The machine is new and has never been used. The DMG MORI CL2000A is an excellent choice for the production of high-precision and repeatable parts used in many industrial sectors. This compact yet extremely powerful lathe will excel in even the most demanding production challenges. All machining processes, i.e. precision turning or threading, are performed fully automatically by means of the spindle and the cutting tools, taken from a 10-position turret. The spindle, driven by a high-powered motor, rotates at a maximum speed of 4500 rpm and operates in two X,Z axes with feeds of 245 mm and 370 mm respectively. What’s more, the machine’s design is based on the Finite Element Method (FEM). This solution guarantees the maintenance of high geometrical accuracy of the design, even under heavy loads. ...
turning diameter: 250 mm turning length: 600 mm control: FANUC Series 31i-Model A total power requirement: 23 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 376 mm turning length: 760 mm control: FANUC I-Series Plus greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 4000 U/min spindle drive motor: 22 / 15 kW spindle nose: ASA A2-8 spindle bore: 81 mm bar material dia.: 76 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 12 St. travel -x axis: 260 (72 + 188 ) mm travel -z axis: 830 mm travel -y axis: 105 (+/- 52,5) mm diameter of quill: 100 mm quill stroke: 100 mm tailstock taper MT: MT 5 total power requirement: 41,98 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 4,0 x 2,5 x 2,2 m CNC control FFANUC I-Series Plus - chip conveyor - driventools 5000U/min, 7,5kW - C-axis - hydraulic unit - tailstock - coolant 7 bar - bar loader interface Capto C3 straight chair: 2 Capto C3 90° chair: 1 ER20 Capto chuck: 10 ER ...
The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories
Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system
Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.
Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg
x-travel: 750 mm y-travel: 210 mm z-travel: 1150 + 100 mm control: Fanuc MSX-701III Maximum turning diameter: 660 mm Max. turning length: 1498 mm Diameter over cross slide max.: 400 mm number of spindle speeds: 3000 U/min tool piece magazine with: 40 Plätzen turret: 10 Fach total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 254 mm, 500 mm, 3600 1/min
Stock number: 3967 CNC LATHE Manufacturer: HYUNDAI, Type: HIT 18S Machines NO.: 34156066, Year of manufacture: 1998 Specifications: Max. circulation diameter 254 mm dia. Turning length 500 mm Main motor power 15 kw Main spindle speed range 3600 rpm Spindle bore 75 mm dia. X axis movement 180 mm Z ash movement 510 mm Tool turret 1 with 8 stations Control Siemens 840C Fabr. Controlled in X-Z axes Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg
The machine is in good technical condition, testing possible after prior agreement. Swing diameter over bed: 630 mm, max. turning diameter: 350 mm, max. turning length: 870 mm, spindle passage 52 mm.
turning diameter: 430 mm turning length: 1500 mm control: OSP P300 turning diameter over bed: 670 mm turning dia. over face-slide: 480 mm Workingspindle:: power capacity - main spindel: 30/22 kW turning speed range - main spindle: 0 - 3000 U/min max. bar capacity: 95 mm spindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min travel -x axis: 270 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min travel -y axis: 120 mm total power requirement: 29 kVA weight of the machine ca.: 8,6 t dimensions of the machine ca.: 4,3 x 2,25 m CCNC turning and milling center equipped with: - CNC control OKUMA OSP P300 - 12-fold Tool Revolver for driven tools - Tailstock - Chip conveyor - self-centering Chuck 315 mm Autoblock - 2 motorized radial modules - 2 axia ...
turning diameter: 256 mm turning length: 530 mm control: Fanuc 31i-A turning diameter over bed: 550 mm turning diameter over cross slideways: 350 mm main spindle:: max. turning speeds: 6000 min/-1 Drive power - main spindle: 11 kW max. torque: Nm max. rod diameter: 45 mm spindle head: A2-5 chucking diameter: mm tool turret:: shaft height for square tool: 25 mm Drill shank diameter: 50 mm travel:: x-axis: 210 mm z-axis: 560 mm feeds:: rapid traverse: x 20 / z 24 m/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 m Technical Specifications: - Manufactured in 2017 but not put into operation until 2021 - Fanuc 31i mod A CNC control - Y-axis - 20 bar tool cooling - Fedek bar loader - Chip conveyor - 12-station tool turret - 10 rotating tools The data for this ad was created with ModulMWS - the software solution o ...
centre height: 400 mm centre distance: 3.000 mm max. swing over bed: 810 mm max. swing over facing slide: 510 mm max. swing-dia. in gap: 850 mm control: WEILER max. workpiece weight: 3.800 kg spindle diameter in front bearing: 150 mm spindle bore: 106 mm faceplate diameter: 630 mm worktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mm spindle turning speed - stepless: 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - ...
turning diameter: 100 mm turning length: 75 mm control: FANUC Oi-TF total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 350 mm, 650 mm, 3500 1/min
CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition
turning diameter: 465 mm turning length: 1050 mm control: Heidenhain x-axis: 300 mm total power requirement: kW weight of the machine ca.: 7600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 550 mm turning length: 1500 mm control: Fagor 8055 x-axis: 108 mm z-axis: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 640 mm swing diameter over face slide: 435 mm control: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/min centre distance: 1.500 mm spindle bore: 70 mm spindle diameter in front bearing: 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition and can be inspected under power at any time. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools
maximum number of results exceeded
please refine your search
