137,091 used machines on RESALE, but how to find them? Machine Search
turning diameter: ca. 500 mm swing diameter: ca. 600 mm travel -x axis: ca. 400 mm travel -z axis: ca. 600 mm spindle turning speed range: 2000 U/min spindle drive: 63 kW control: SIEMENS control: SINUMERIK System 3 tool turret: 1 x 12 Pos total power requirement: kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: Siemens 840D passage width: 1300 mm electro-magnetic table: 4200 x 1300 mm grinding height: 550 mm grinding motor: 306 kW grinding motor turning speeds up to: 370 U/min grinding motor feed, infinitely variable: 0,5-35 m/min coolant flow rate: 2000 l/min weight of the machine ca.: 50 t dimensions of the machine ca.: 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer GER Model SR150-60 CNC Year 2007 FAGOR 8055i CNC Fixing area on table 1,800 x 550 mm Useful ground surface 1,500 x 680 mm. Longitudinal travel of the table 1,660 mm. Maximum weight on the table 1,700 kg. Automatic cross travel 600 mm. Max. distance from table to center of wheel 625 mm. Variable infinite table speed 2-28 m/min. Cross-table speed 0.02 – 5 m/min Vertical table speed 0.02 – 2 m/min Infinite table speed regulation INCLUDED Maximum width to be ground with a grinding wheel of 80 mm 680 mm. Minimum CNC programmable increment 0.001 mm Spindle speed 1,500 rpm Main motor power spindle 12 kW Total machine power 22 kW Wheel dimensions Ø 400x80x127mm. FAGOR 3-Axis Servo Motors and Regulators (X, Y, Z) included High-density electromagnetic plate INCLUDED Dimensions of the electromagnetic plate 1,500 x 600 mm. Coolant Filtration Equipmen ...
Working wheel dimensions (od x id x width): Ø610x80xØ304.8 mm, cnc brand: FANUC, CNC brand: FANUC, CNC model: 21 Oi TB, Maximum length between points: 1060 mm, Max travel Z axis: 750 mm, Maximum length to be rectified: 600 mm, Height of points: 225 mm, Ø min/max to be rectified: 10 - 300 mm, Max. piece weight: 125 Kg, Max travel X axis: 325 mm, Grinding wheel speed: 45 m/s, Main engine power: 11 Kw, Workpiece head speed: from 30 to 1000 rpm, Workpiece holder head cone: MORSE 5, Power of workpiece head motor: 12 Nm, tailstock cone: MORSE 4, Travel of the tailstock quill: 70 mm, Hydraulic movement of the tailstock: 150 mm, Total power: 22 Kw, Long: 2300 mm, Tall: 1900 mm, Width: 2634 mm, Weight: 7750 Kg, Accessories: Cooling equipment with paper filter; MARPOSS meter, positioner and balancer;
Key data: 350 mm, 500 mm, 450 mm
CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...
Generating Grinding Machine Grinding Machine Gleason Pfauter G320 CNC + Promot Automation Hersteller [manufacturer]: Gleason Pfauter G320 + with Promot Automation handling unit Type [ type]: G 320 Control unit: Siemens 840 Incl. control panel Baujahr[construction year]: 10/2001 Module [ ]: 0.5-7.0 Min. workpiece diameter [ ]: 10 mm Max. workpiece diameter [ ]: 380 mm Number of teeth [ ]: 10-600 Vertical carriage stroke "Z" [ ]: 200mm Horizontal carriage stroke "X" [ ]: 230mm Tangential carriage stroke (SHIFTING) "Y" [ ]: 135mm Swivel angle clamping head "A" [ ]: +-45° Tailstock tip stroke [ ]: 125mm tangential slide stroke – dressing [ ]: "V" 180mm radial carriage stroke – dressing [ ]: "U" 110mm Rotation speed – grinding wheel in progress [ ]: 3000rpm max - infinitely variable Egg speed - linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RP ...
This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details.
Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement
PAUL CNC cross-cut machine 18KE - year of construction 2019 - unused - luminescence probe - 11 kW For sale is a PAUL CNC cross-cut machine model 18KE, built in 2019 The machine was originally ordered for an industrial project and has never been used in production. The original PAUL delivery documentation with detailed equipment is available. The 18KE is part of the PAUL series of CNC optimisation cross-cut saws for heavy timber. In particular, the 18KE is designed to cut defects by means of luminescent switches and chalk marking. Technical data o Manufacturer: PAUL Maschinenfabrik GmbH & Co. KG o Type: CNC cross-cut machine 18KE o Year of construction: 2019 o Ready for shipment according to delivery note: 09.11.2020 o Machine weight: approx. 1,850 kg o Connection: 400 V / 50 Hz o Connected load: 17.6 kW o Saw blade: HM, Ø 800 mm o Saw blade bore: 100 mm o Saw blade speed ...
CSM CNC38TBRE tube and profile bending machine was built in 2008 in China by CHIAO SHENG MACHINERY CO., LTD. The machine is designed for the precision bending of tubes, profiles and bars with a maximum diameter of 38 mm. It enables the production of parts with various shapes and bending radii, used in many industries. A maximum bending angle of 190°, combined with a wide range of bending radii, enables the production of both tight bends and parts with larger bending radii. Bending accuracy of ±0.01° ensures high precision and repeatability of the workpieces. The CSM CNC38TBRE is equipped with an intuitive CNC controller that facilitates day-to-day operation of the machine. The control system features a large memory capacity, allowing numerous user programmes to be stored. The CSM CNC38TBRE tube bending machine weighs 2500 kg. Technical specifications of the CSM CNC38TBRE tube be ...
This 4-axis HUBER River 600 CNC was manufactured in 2017. It features a traverse of 600 x 400 mm in the X and Y directions, and a Z-axis travel of 300 mm. The machine accommodates electrode diameters ranging from 0.3 to 3.0 mm. If you are looking to get high-quality small hole drilling capabilities, consider the HUBER River 600 CNC die-sinking EDM machine we have for sale. Contact us for further details.
This 3-axis MACMON M 454 V CNC was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 250 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed of 6300 rpm and a hydraulic tool clamping system. If you are looking to get high-quality machining capabilities, consider the MACMON M 454 V CNC vertical machining centre we have for sale. Contact us for further details.
This 3-axis FERMAT CTOF 80/2500 CNC was manufactured in 2006. It features a press force of 80 tons and a maximum bending length of 2500 mm. If you are looking to get high-quality bending capabilities, consider the FERMAT CTOF 80/2500 CNC press brake we have for sale. Contact us for further details.
This 3-axis FEHLMANN PICOMAX 80 CNC-W 2/3 was manufactured in 2005. It features a spindle speed range of 50 - 9,200 rpm and a maximum torque of 80 Nm. The machine offers a travel of 700 x 315 mm in the X and Y axes, with a vertical adjustment of 495 mm. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 80 CNC-W 2/3 vertical machining centre we have for sale. Contact us for further details.
Danobat RTM-2500 CNC X600 CNC Surface Grinder Grinding Length: 100" Grinding Width: 28" Table Length Dimension: 98.43" Table Width Dimension: 19.690" -Grinding Wheel- Grinding Wheel Diameter: 20" Grinding Wheel Width: 4" Grinding Wheel Bore: 8" -Wheel Head- Angle Adjustment: 0 DEG Wheel Head Motor: 20 HP Wheel Head Speed: 1,200 RPM -EQUIPPED WITH- Fagor 8055 CNC Control Magnetic Swarf Conveyor
This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, its ideal for precise bending operations. Contact us for more information about this machine.
CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.
Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE ...
Key data: 6400 mm, 3 mm
with the following equipment: - Tin cassette - Hydraulic upper beam adjustment - Additional stand unit - Cheeks laser-hardened - Control with swivel arm - Motor stop system type 11 measuring range 20-1250mm - Stop finger 4x - Crowning device, manual - Control on the swivel arm Original price of the machine approx. 269,000 € Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.with the following equipment: - Tin cassette - Hydraulic upper beam adjustment - Additional stand unit - Cheeks laser-hardened - Control with swivel arm - Motor stop system type 11 measuring range 20-1250mm - Stop finger 4x - Crowning device, manual - Control on the swivel arm Original price of the machine approx. 269,000 € Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried ...
Horizontal turning machine manufactured in 2000. This ZPS S-60 CNC features a maximum machining diameter of 430 mm and a maximum machining length of 750 mm. It offers X/Z-axis travel of 275/820 mm and a spindle speed range of 20 to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the ZPS S-60 CNC machine we have for sale. Contact us for further details.
CNC Tube Bending Machine manufactured in 2018. This CANSA CNC 51 R1 features a maximum tube diameter of 51 mm and a maximum wall thickness of 4 mm. It includes a mandrel and part configuration software for enhanced bending capabilities. If you are looking to get high-quality bending capabilities, consider the CANSA CNC 51 R1 machine we have for sale. Contact us for further details.
This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details.
This 5-axis FERMAT WHN 13.8 CNC was manufactured in 1980 and overhauled in 2008. It features a generous X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,250 mm. The machine includes a robust table size of 2,200 x 1,800 mm and can handle a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality machining capabilities, consider the FERMAT WHN 13.8 CNC horizontal machining centre. Contact us for further details.
faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm floorplate 3250 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of the machine ca.:3,5 x 2,0 x 2,5 m
pulling force - max.:100 t total power requirement:87 kW weight of the machine ca.:51 t dimensions of the machine ca.:95 m² m working stroke:2750 mm max. helix angle:+/- 30 ° Working stroke: 2750 mm
turning length:140 mm dimensions of the machine ca.:4 x 2 x 1,9 m
centre height:500 mm centre distance:2000 mm control:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kW weight of the machine ca.:3300 kg dimensions of the machine ca.:2500 x 4000 x 2400 mm
total power requirement:10,5 kW weight of the machine ca.:4800 kg dimensions of the machine ca.:3000 x 2100 x 2000 mm centre distance:1200 mm Height of centres:200 mm grinding-table stroke max.:X -Achse 1000 mm table-size:2060 x350 mm z-axis:Querhub 250 mm Feed speed:0,005 - 5 m/min. grinding head - swivable:360 ° taper ISO:50 control:Sinumerik System 8 Documents:vorhanden
4 Roll plate bending machine dual initial pinch MG Italy 2000X6mm Mode CNC EASYCOM 4-AXIS NEW MACHINE serial no. 25072 Capacity: -Width of plate: 2000 mm -Thickness plate roll 6 mm -Plate pre-bend 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: hardened rollers, surface smooth finishing for all kind of plates and stainless steel Prebend process in manual and automatic full rounding no-flat plate ends Conical plate rolling cones and reducers hydraulic control dual initial pinch Driven rolls rotation hydraulic powered with axial gear unit plate dragging and forming . Console electric CNC with centralized commands joysticks , 4-axis position programming and readout. CNC controller interface touch screen 15”, 4 axis teach-in programming mode, infinite memory storage for automatic plate roll. On screen digital po ...
Siemens Sinumerik 840D control, incl.: grinding tool preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Tip distance: 600mm, tip height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External/internal grinding spindle:, Grinding wheel standard (Øa x b x Øi): 600 x 80 x 304.8 mm, Grinding wheel circumferential speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper hole center point: MK 4, Coolant reservoir: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...
- Working area pipe steel up to 30 mm x 2 mm - Pipe working area stainless steel up to 30 mm x 1.5 mm - Pipe extension length 2,000 mm - Bending angle up to 180° + 10° overbending - Automatic bending sequence ( bending, twisting, longitudinal ) - CNC control - Input PC with software Transpro V2 + Tanspro V2 package (indication of previous owner) - Function triggering via hand switch - Clockwise bending direction - Radius range max. 125 mm mm -Auto. Mandrel lubrication - Laser scanner for security area - Incl. existing used tool for stainless steel pipe 1 mm 15, 18, 22, 28 mm Bending radius 1.5 D (various wrinkle smoothers, mandrels
maximum number of results exceeded
please refine your search
