cnc tos 80 used for sale

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3700

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3580

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3687

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3624

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45451-3553

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45451-3551

Battery from former Linde Service 1020x1000x800mm Voltage at rest uncharged measured with good performance of 83.39 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1056

REMA Battery Connector 400V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3671

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3691

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3534

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 300-800Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45451-4851

new and unused for batteries with 600-900Ah possible without 16A and Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-8012

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3468

Condition: partly orig. packaging, partly open Auction-ID: A1-45996-233

Youtube function and status video: https://youtu.be/C7fSuG3ugzs Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 49/2018 48V 500 Ah, with very good performance; measured with 50.6V - Duplex mast with full free lift - 3rd valve; Sideshift - Load protection grille (can be easily dismantled) - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-194

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3649

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3623

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3706

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3652

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3686

Battery from former Still Service Comes from Linde E30 with only 6,800 operating hours. With REMA plug and Aquamatic water filling 1020x850x630mm Voltage at rest uncharged measured with very good power of 85.63 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1171

3 PIECES 24V 375Ah batteries from former Linde Service Very good performance measured at 24.99, 25.05 and 25.46V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1132

- incl. 2 x spoons; - Expandable drive; - 1st hand; - CE; - Video on request; - Ready to drive; - Viewing recommended; - Condition see photos; Auction-ID: A1-46334-30

0.65m3 Camper conversion for table tops, furniture construction, epoxy... Poplar log log / 2.80m long / diameter approx. 60 / sawn in 60mm / 7 planks / dry air-dried Auction-ID: A1-46501-2012

Demo machine, raked approximately 50 hectares, Equipped with independent lifting. Auction-ID: A1-40137-47

800 Watt 36 Volt, 6 inch rims with all-terrain tires, battery gauge, Front / and rear window position, equipped with LED lighting and Horn, quiet, 3 different speeds, for children from +/- 2 to 8 years. Seat height from ground to saddle: 53cm, Weight: 45 kg, Quad size: 101 x 56 x 66 cm Auction-ID: A1-40418-418

Maximum force 470 daN Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-3

2 cupboards 44 cm deep, 1 cupboard 48 deep, with intermediate shelves see pictures, without key Auction-ID: A1-46501-714

Workbench with Bankknecht Beech Auction-ID: A1-46501-2056

Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43752-25

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-2

Slide size 475x130 mm Slide stroke 100 mm Shots per minute 10-50 Max mould height 400 mm Worktop size 800x570 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-6

Slide size 1000x800 mm Slide stroke 100 mm Strokes per minute 40-100 Opening between uprights 520x260 mm Worktop size 1000x800 mm REEL Max reel width 600 mm RECTIFIER Max belt width 500 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-1

Package of 80 Triple Rhombus Oak planks, including 12 bags of mounting brackets + screws and 12 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 20.5 centimeters Working width: 19.5 centimeters Auction-ID: A1-40111-351

800 Watt 36 Volt, 6 inch rims with all-terrain tires, battery gauge, Front / and rear window position, equipped with LED lighting and Horn, quiet, 3 different speeds, for children from +/- 2 to 8 years. Seat height from ground to saddle: 53cm, Weight: 45 kg, Quad size: 101 x 56 x 66 cm Auction-ID: A1-40418-396

Auction-ID: A1-46501-2101

Signs of use Auction-ID: A1-46501-483

Auction-ID: A1-46501-2033

Dräger PM 8060 Vitara Patient Monitor ECG Patient Monitoring Auction-ID: A7-46327-130

Panhans Format Saw Table Length 2.80m to 3.20m with Scorer Auction-ID: A1-46501-2617

Häfele furniture glides with adapter for higher version Auction-ID: A1-46501-2076

Package of 80 pieces of Rhombus Oak rebate parts, including 12 bags of mounting brackets + screws and 16 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 16.2 centimeters Working width: 15.2 centimeters Auction-ID: A1-40111-356

Slide size 385x350 mm Slide stroke 80 mm Max opening between table and slide 350 mm Worktop size 800x520 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-10

Good condition Auction-ID: A7-46327-93

Transport trolley with two shelves 50x100cm in size 80cm high Auction-ID: A1-46501-2700

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

with 2 pcs. roller conveyor Auction-ID: A7-45452-19

CNC LATHE Inv. No. 12.710C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG16AC Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-114