128,416 used machines on RESALE, but how to find them? Machine Search
Mahr / Savory / Mitutoyo - Batch of precision measuring tools Auction-ID: A1-46070-180
Batch of masonry tools Weight: 12KG net Auction-ID: A1-46070-237
Batch chisels & dowels Weight: 32KG net Auction-ID: A1-46070-272
Mahr / Mitutoyo - Batch of professional measuring tools Condition: unused Auction-ID: A1-46070-11
Festo - DGC-63-800-KF-YSRW-A - Batch of linear actuators 4x Auction-ID: A1-46070-304
Party mix sockets/sockets & accessories Weight: 18.6KG net Auction-ID: A1-46070-208
Tool milling machine Deckel FP 2 / 3-axis digital display Heidenhain ND 780 -Travel paths X/Y/Z: 450 x 200 x 400 mm -Table clamping surface 700 x 350/tilt-swivel rotary table -Speed range: 40–2000 rpm -Feeds & rapid traverses in all three axes -Tool holder: ISO 40 -Vertical/horizontal milling device with vertical sliding head -Coolant device -3-axis digital display: Heidenhain ND 780 -Documentation -Chip tray -Various tool holders -Collets Dimensions: LxW xH 1.5x1.7x1.8 meters / Weight 1600Kg
Macmon M100 Universal Milling Machine with Vertical Head -Milling spindle -Number of spindle speeds: 16 -Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm -Spindle Inner Taper: ISO 40 -Collet bore up to: 25 mm Ø -Spindle block -Spindle block displacement by hand: 170 mm -Vertical milling table -Size of the clamping surface: 640 × 195 mm -2 T-slots, width/spacing: 12 / 90 mm -Longitudinal movement automatic/manual: 290 / 310 mm -Vertical movement automatic/manual: 310 / 340 mm -Feed gearbox -Number of feeds: 16 - Feed size (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 -Motion spindles -Longitudinal movement of the table (1 turn): 5 mm -Vertical movement of the table (1 turn): 2.5 mm -Spindle block movement (1 turn): 2 mm -1 graduation line (longitudinal and vertical): 0.02 mm -1 G ...
\" New, unused magnetic measuring stand from KS TOOLS for recording dial gauges / dial gauge holders. Version with 3 precise joints for flexible positioning and stable fixation during measurement and testing work. The item is in its original packaging, only the outer packaging shows traces of storage. The measuring stand itself is new and unused. • Manufacturer: KS TOOLS • Designation: Magnetic measuring stand • Version: 3 joints • Article number: 300.0623 • Condition: new • Packaging: Original packaging (with slight signs of use) • Application: Dial gauge, fine measurements, testing and adjustment work \" Auction-ID: A7-46417-257
unused; tools wrapped in plastic; 12-piece pliers set; 13-piece hammer set; 14-piece measuring set; 36-piece impact wrench set; 21-piece keys with T-handle; 41-piece screwdriver set; 29-piece combination wrenches; 12-piece ring wrenches; 125-piece dab set; 84-piece mouthguard set; 6443 Auction-ID: A1-45902-329
equipped with tools 274 pieces; 4 wheels, 2 of which have brakes; steering committee; worktop; 7drawers; 1 lockable cabinet with shelf; 2 key sets; unused in box; 2419; Auction-ID: A1-45902-605
Universal Tool Milling Machine Manufacturer: AVIA S.A., Poland Type / Model: FNE 40 P Year of Make: 2013 Serial Number: 90567 Accessories / Scope of Delivery • Machine Vise • Tool Holders SK40 • Various Milling Tools and Clamping Devices • Documentation / Documents Dimensions (L × W × H): approx. 195 × 220 × 220 cm Weight: approx. 1,900 kg Table / clamping surface: • Clamping surface: approx. 800 × 400 mm • T-slot table • Max. table load: approx. 400 kg Travel paths / machining range: • X-axis: approx. 620 mm • Y-axis: approx. 420 mm • Z-axis: approx. 400 mm Spindle: • Spindle holder: SK 40 (DIN 69871) • Max. spindle speed: 4,000 rpm • Speed range: approx. 50 – 4,000 rpm, infinitely variable • Max. tool diameter: 125 mm • Max. tool weight: 6 kg Feeds: • Stepless feeds in X / Y / Z • Working feed up to approx. 2,000 mm/min • Rapi ...
\" Lot measuring tool & Mitutoyo accessories – depth measurement accessories, tips, adapters Item measuring accessories from workshop liquidation. Included are: • Mitutoyo Depth Gage Span 900370 – 180 mm (Made in Japan) • Mitutoyo 167-111 (MB-275) extension rod • Mitutoyo DB ATT-3 accessory • Several centering tips • Test mandrels • Magnetic holders (partly repackaged) • Various measuring tips and adapters Condition mixed: partly new, partly used with normal signs of use. \" Auction-ID: A7-46417-312
Equipped with 2 swivel wheels; 311 volumes; 12 drawers; kit; unused; 6451 Auction-ID: A1-45902-602
\" Tool batches with milling tools, consisting of disc milling cutters, slip-on milling cutters and milling heads. Included are various designs and diameters, some HSS, some carbide-tipped. Some tools are in their original packaging, others are used. • Tool type: disc milling cutters, slip-on milling cutters, milling heads • Material: HSS / HM-tipped (mixed) • Designs: different diameters & tooth shapes • Holder: slip-on hole / tool holder • Manufacturer: Garant among others • Condition: used to new • Quantity: approx. 17 individual parts (unsorted) Weight: • Net weight total: approx. 5 kg \" Auction-ID: A7-46417-177
including open-end wrench with ratchet; various pliers; socket set with ratchet; various screwdrivers; precision screwdrivers; Allen key; various bits; claw hammer; crimping pliers; scissors; tape measure; level; hot glue gun; plastic clamps; carpet knife; 2161; Auction-ID: A1-45902-613
\" Lot of precision and measuring tools – 22 pieces (workshop / metalworking) Lots of 22 high-quality precision, measuring and marking tools from workshop and industrial stock. The item includes various angles, gauges, measuring equipment and accessories, some of which are in original wooden or plastic boxes. • Various precision stop angles / hair angles in different sizes • Angle and scribing gauges, some in wooden boxes • Dial gauge with special bracket (0.01 mm reading, see pictures) • Micrometer / special measuring device • Various hair rulers • Tensioning and holding devices • Other precision small parts and accessories • Storage boxes (wood & plastic) \" Auction-ID: A7-46417-255
258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-45902-601
\" EWEFA HSK-C100 Tool holder / adapter Ø150 Solid, precisely manufactured HSK-C100 tool holder / adapter for use on CNC machining centres. Robust industrial design with large contact surface and clamping/clamping ring. Suitable for demanding milling and machining tasks. Condition: • used • normal signs of wear • no visible cracks or chipping • Manufacturer: GEWEFA • Article number: 5007-251.00 • Version: Ø150 × HSK-C100 × 92 • Made in Germany \" Auction-ID: A7-46417-140
wooden worktop; mobile; brakes; 2 parts lockable; Unused in box; 7484 Auction-ID: A1-45902-25
Cart with detachable top box; top box with 8 drawers and top lid; Cart with 5 drawers and cupboard with double doors; 13drawers - 9 filled; 2 swivel wheels, 2 of which are braked; 7212 Auction-ID: A1-45902-225
Mobile; telescope handle; combination locks; unused in box; 5182; Auction-ID: A1-45902-607
267 pieces; 13 drawers, 11 of which are drawers filled; 12 pliers; 12 hammers; 8 Files ; 6 hexagon keys; 6 T-Handle ; 21 screwdrivers; 40 spanners; 10 Allen keys; 127 caps and bits; 25 keys ; wooden worktop; mobile; brakes; 2 parts lockable; 5595 Auction-ID: A1-45902-327
44× HSK-A63 Tool Holders mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled. The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-11
\" Fetra Tool Trolley / Table Trolley 1200 x 700 mm with Cabinet Compartment Stable industrial table trolley of the Fetra brand in heavy version. Equipment: • Upper loading area approx. 1,200 x 700 mm • Lower shelf • Side handle • 4 swivel castors • Side cabinet compartment with door • Steel frame construction Condition: Used with clear workshop marks. Plates with signs of wear and dirt. Closet door available. Sale without content. Loading area: approx. 1,200 x 700 mm Total height: approx. 920 mm Load capacity: 1,200 kg Type: steel construction Colour: blue / white \" Auction-ID: A7-46417-371
Over 100 pieces of collets for milling tools Manufacturers: FAHRION, NT-Tools, GARANT and others Types: GERC25-P, ER32, HS20, GERC16-P and similar Auction-ID: A7-46417-14
equipped with tools 274 pieces; 4 wheels, 2 of which have brakes; steering committee; worktop; 7drawers; 1 lockable cabinet with shelf; 2 key sets; unused in box; 2419; Auction-ID: A1-45902-604
including open-end wrench with ratchet; various pliers; socket set with ratchet; various screwdrivers; precision screwdrivers; Allen key; various bits; claw hammer; crimping pliers; scissors; tape measure; level; hot glue gun; plastic clamps; carpet knife; 2161; Auction-ID: A1-45902-610
\" Lot of boring heads / fine boring tools with holders (9 pieces) Extensive lot of mechanical boring tools from industrial use. Scope of delivery (complete only): • several fine boring heads with scale adjustment (e.g. pitch 0.02 mm) • boring rods / boring rods in different lengths • various tool holders (SK / Morse taper / special holders, mixed) • cutting pins / cutter holders (loose, in box) • operating instructions \"drilling and boring\" (old) • standard markings including TGL 30-120, Ø A60×8 Sale: • only as a complete lot • no individual sale \" Auction-ID: A7-46417-141
including open-end wrench with ratchet; various pliers; socket set with ratchet; various screwdrivers; precision screwdrivers; Allen key; various bits; claw hammer; crimping pliers; scissors; tape measure; level; hot glue gun; plastic clamps; carpet knife; 2161; Auction-ID: A1-45902-611
4 drawers filled; mobile; lockable; drawer 1 Socket set 1/2\" and 1/4\" 4 to 32 and accessories; Drawer 2 stitch ring wrench set 8 to 22 torx allen set bits; drawer 3 screwdrivers and allen set; drawer 4 pliers, hammer, pin drivers; tray 4 & 5 are empty for storage; 5769 Auction-ID: A1-45902-614
\" System 3R EDM Tooling Set – Art. 3R-901-20E / 3R-90°-01 – Made in Sweden System 3R Clamping and Tool Holder Set for EDM Machines. The set is in mint condition and comes from stock. Scope of delivery (4 packs): • System 3R base plates / tension strips • Angle plate / clamping bracket • 3R clamping brackets / mounting elements • Set of 3R collets (in the magazine) • Screwdriver / assembly tool • Accessories and fasteners 1. System 3R base plate / tension strip Manufacturer: System 3R Type / Item no.: 3R-901-20E Condition: as good as new (stock) Description: System 3R clamping strip / base plate for the System-3R EDM clamping system. Precision component for holding and positioning electrode holders or workpiece holders on EDM machines. Origin: Made in Sweden Scope of delivery: Base plate according to the picture. 2. System 3R Angle Plate 90° Manufacturer: System 3R ...
Mobile; telescope handle; combination locks; unused in box; 5182; Auction-ID: A1-45902-606
258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-45902-600
worktop; key set; unused in packaging; 4447; Auction-ID: A1-45902-598
\" Extensive lot of measuring and testing tools from industrial production. Includes high-quality precision angles, straightening and hair rulers, gauge block, height gauge, feeler gauges and measuring and gauge accessories. Article: Mixed Lot of Measuring and Testing Equipment / Workshop Stock Manufacturer (visible): HOLEX, Mitutoyo, other manufacturers Condition: used, partly with test equipment stickers Sale: only complete as lots • Large precision/stop angles (solid, ground, partly HOLEX) • Machine/mounting brackets in heavy versions • Mitutoyo steel dimension / ruler, hardened, stainless • Analogue height gauge (Mitutoyo, 0–200 mm, fine adjustment, stable foot) • Large batch of loose feeler gauges • Further straightening and test strips, partly in wood recordings \" Auction-ID: A7-46417-138
\" Bundle of taps, reamers and other cylindrical cutting tools in different dimensions and designs. The lot consists mainly of older industrial cutting tools (including taps, reamers, shank tools). In some cases, manufacturer markings, HSS information or dimensions are available (e.g. old quality tools / GDR stocks). Net weight: 15 kg \" Auction-ID: A7-46417-198
Mobile; telescope handle; combination locks; unused in box; 5182; Auction-ID: A1-45902-609
Equipped with 2 swivel wheels; 311 volumes; 12 drawers; kit; unused; 6451 Auction-ID: A1-45902-603
equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45902-616
• Manufacturer VEB METAN, 9318 Tannenberg / Erzgebirge • Type / Model Tool Cabinet Model I • Name Steel Tool Cabinet METAN Model I • Description, Accessories, Condition Stable DDR tool cabinet in welded sheet steel design. Version with one door, a drawer in the upper area and several shelves. Industrial version in typical green paintwork. Used condition with age-related paint damage, scratches and corrosion approaches. Cabinet is sold without contents. • Technical data External dimensions according to the nameplate: approx. 965 x 500 x 400 mm Sheet steel construction 1 door 1 drawer Several shelves Auction-ID: A7-46417-356
unused; tools wrapped in plastic; 12-piece pliers set; 13-piece hammer set; 14-piece measuring set; 36-piece impact wrench set; 21-piece keys with T-handle; 41-piece screwdriver set; 29-piece combination wrenches; 12-piece ring wrenches; 125-piece socket set; 84-piece mouthguard set; 7483 Auction-ID: A1-45902-527
4 drawers filled; mobile; lockable; drawer 1 Socket set 1/2\" and 1/4\" 4 to 32 and accessories; Drawer 2 stitch ring wrench set 8 to 22 torx allen set bits; drawer 3 screwdrivers and allen set; drawer 4 pliers, hammer, pin drivers; tray 4 & 5 are empty for storage; 5769 Auction-ID: A1-45902-615
Including Michelin gauge, headlights, KS-tools pneumatic impact wrench, oil pump and lubricants Auction-ID: A1-41682-87
Tool cabinet / drawer cabinet 72 × 72 × 101 cm Full extension 3 drawers Full extension (load-bearing drawer slides) Without key Without contents Used, with usual signs of use Auction-ID: A7-46417-49
48× HSK-A63 Tool Holders mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled. The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-10
Sturdy industrial tool cabinet made of sheet steel, suitable for workshop and manufacturing environments. Version with hinged doors, several pull-out shelves and 2 drawers in the upper area. Robust construction for heavy tools and accessories. Scope of delivery – Tool cabinet as shown – Several pull-out shelves – 2 drawers – Doors with lock – Without contents – Series: 3000 – Max. drawer load: 400 N – Max. shelf load: 600 N – Max. total load: 4400 N – Total external dimensions: 1000 x 500 x 1000 mm Auction-ID: A7-46417-72
maximum number of results exceeded
please refine your search
150 € 
