cnc tool and used for sale

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

3000 x 1500mm 4000w

Key data: 340 mm, 1000 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...

CNC lathe GILDEMEISTER CTX 420 linear With Siemens 840 D powerline controller Year of Make: 2006 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations Y axis , C axis Tool measuring device Parts collection facility 3 jaw chuck hydraulic 0 210 mm with foot switch Hydraulic Collet Chuck Hainbuch IRCO Breuning RBK 10012 Bar Feeder Signal lamp Tailstock with quill Conveyor Oil mist extraction Coolant system with IKZ and belt filter system Operating instructions

DECKEL MAHO DMU 100 T YEAR OF CONSTRUCTION: 2001 - Number of axes: 5 ( simultaneous) milling spindle - Tool holder: SK40 - Spindle drive power: 15 [kW] - Spindle speed: 20 - 12,000 [up] LINEAR ACHSEN - Travel X/Y/Z axes: 1,060 x 710 x 710 [mm] - Rapid speed (X/Y/Z) : 30,000 [mm/min] - Feed speed (X/Y/Z) : 20 - 15,000 [mm/min] SCHWENKACHSE A : SCHWENKKOPF - Travel: 90 [degrees](+/-) - Minimum resolution: 0.001 [degree] SCHWENKACHSE B : NC ROUND TABLE x 800 [mm] - Travel: 360 [degrees](+/-) - Minimum resolution: 0.001 [degree] WERKZEUGWECHSLER - Number of tools in the magazine: 32 ( 2x 16 places) table - Table size: 1500 x 795 [mm] - Loading table max. : 500 [kg]

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional

Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...

General Manufacturer: Citizen Type: Cincom K 12 E Year of Make: 2007 Control: Citizen Cincom Number of axles: 7 Outer diameter: 12 mm Turning length: 200 mm Thread diameter: 8 m Spindle Passage: 20 mm Spindle Speed: 200 – 10,000 t/min Tapping diameter: 5 m Sub-spindle Speed: 0 – 10,000 t/min Workpiece length for counter-machining: 80 mm Tool Carrier Number of driven tools: 4 Speed of the driven tools: 6,000 t/min Drive Connection 50 Hz 3x: 400 Volts Spindle motor: 3.7 kW Dimensions and weight Dimensions: 2,020 mm x 1,070 mm x 1,680 mm Weight: approx. 2,250 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Bar Feeder Iemca Genius 118 32U High frequency spindle 80,000 rpm

MEXPOL TUB 830 C CNC lathe was built in 2007 in Germany by MEXPOL Werkzeugmaschinen GmbH. The machine, with its extensive machining capabilities, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 830 mm are machined inside a large workspace by means of components characterised by the best technical parameters. In order to achieve excellent feed dynamics and repeatability, the X and Z axes are driven by powerful drives of the renowned SIEMENS company. The rigid design of the TUB 830 C x 2250, in turn, eliminates any vibration and oscillation, guaranteeing maximum process stability during even the most intense challenges. The MEXPOL TUB 830C CNC lathe is offered with a wide range of equipment, including an advanced SIEMENS CNC control and a MULTIFIX toolpost. The total weight of the machine is 4930 kg. Technical specifications of the MEXPO ...

Refurbished machine 3000 x 1500mm Laser: 5000w

FINN-POWER SG-6 turret punch press was built in 1999 in Finland by LILLBACKA CORPORATION. The machine has been regularly serviced throughout its service life. The FINN-POWER Shear Genius SG6 was created as an answer to the daily challenges of modern business. This system is designed for precision punching, stamping and cutting of sheet metal with a maximum length of 3061 mm and a width of 1528 mm. The integration of all the necessary equipment in a single place enables significant reductions in production costs as well as overall working time. All machining processes are performed fully automatically, in a single work cycle. The loading system separates a single sheet from the stack and fixes it in pneumatic clamps. The holes are punched by means of reliable tools taken from the 20-station turret. Parameters such as stroke depth, stroke length and stroke speed can be fully adapted  ...

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

DMG MORI NTX 2000/1500 SZM CNC turn-mill center was built in 2018 in Japan by DMG MORI CO., LTD. The machine on offer is an excellent choice for the mass production of precision parts, which are used in such industries as automotive or aerospace. This is because the NTX 2000/1500 SZM enables simultaneous turning and milling of workpieces with even the most complex geometries, in a single working cycle. The combination of these two processes significantly reduces production costs, as well as overall working time. The machining process is performed by using the state-of-the-art technology available on the market. It includes, among others, two spindles with a labyrinth cooling system. This system was designed for frequent use of high-pressure coolant. It ensures a constant zero-point height throughout the working cycle, regardless of the amount of generated heat. To limit the effect of  ...

The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz

The machine is in good technical condition, after prior agreement it is possible to test it. Maximum turning diameter: 400 mm Maximum revolving diameter: 760 mm Maximum machining length: 680 mm Maximum spindle passage: 75 mm Travels in the X/Z/Y axes: 250/750/+-50 mm Rapid traverses X/Z/Y: 30/30/12 m/min Machine weight: 6000 kg Machine dimensions: 3230 × 2100 × 2252 mm Fanuc drive performance parameters: Spindle motor power: 15 / 18.5 kW Maximum spindle speed (2 speeds): 0–875 / 0–3500 rpm⁻ Turret power for driven holders: 3.7 / 5.5 kW (30 min) Maximum speed of driven holders: 6000 rpm Servo motor power for X/Z/Y axes: 2.7 / 2.7 / 2.7 kW Cooling pump motor power: 0.5 kW Maximum torque on the MK spindle: 527 / 757 (30 min) N m Maximum torque of driven holders: 35 N m (15 min, 1500 rpm) Recommended clamping pressure range for clamping: 0.35 MPa – 3 MPa

The machine is in good technical condition, testing is possible after prior agreement. The machine was installed in 07/2023 and was used very little. The machine was switched on for 3900 hours, of which 540 hours the spindle was running. Swing diameter over bed mm 750 MACHINE SPECIFICATIONS STYLE 750 Machine STYLE 750 Swing diameter over bed mm 750 Swing diameter over slide mm 530 Distance between centers mm 4000 Bed width mm 450 Maximum load between centers kg 1800 Maximum load in combination with fixed steady rest (type U) kg 2500 Main spindle Main motor power (S6) kW 26 Maximum spindle speed (number of gears) rpm 2000 (3) Spindle bore mm Ø105 Spindle taper A2-11 X and Z axis X axis ball screw Ø mm 32 Z axis ball screw Ø mm 50 Rapid traverse m/min 8. Feed range mm/min 0.01-2000 Tailstock Ø quill mm 125 Quill stroke mm 225 Quill taper MT 6 General Weight kg 8150 Machine color Frame  ...

YAWEI NISSHINBO HPI 3048 turret punch press was built in 2011 in China by Jiangsu Yawei Machine Tool Co., Ltd. The machine is designed for precision machining of sheet metal with a maximum thickness of 6.35 mm. The machining process is carried out using a reliable work head, operating with a maximum force of 30 tonnes. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and nicks on the workpiece surface and significantly reduces noise levels. This is complemented by an intelligent SIEMENS CNC control with many useful functions. The HPI-3048-36LA2 CNC punching machine weighs 18000 kg. Technical specifications of the YAWEI NISSHINBO HPI 3048 turret punching machine - CNC control: SIEMENS SINUMERIK 802D - number of axes: 5 (X,Y,T,C,Z) - maximum punching force: 30 t - maximum sheet metal thickness: 6.35 mm - maximum sheet metal dimen ...

DURMA TP9 turret punch press was built in 2007 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, distinguished by its high efficiency, is an excellent choice for precision machining of sheet metal with a maximum thickness of 6 mm. The machining process is performed fully automatically by means of a reliable work head operating with a maximum force of 20 tonnes. A 27-station turret cooperates with the head, capable of storing a large number of tools of all sizes and types. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. The table is also equipped with clamps, responsible for holding the material securely during machining. All this is complemented by an advanced SIEMENS CNC controller with many useful functions. The DURMA TP9 CNC punching ma ...

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

TRUMPF TruMatic 5000 R punching machine was built in 2001 in Germany by TRUMPF GmbH+Co. Maschinenfabrik. The machine has undergone regular maintenance and has been serviced on an ongoing basis throughout its lifetime. In 2025, among others, the oil pump, oil accumulators, head seals and transoms were replaced. The TruMatic 5000R is used for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching and marking, are performed with a force of up to 22 tonnes on a large brush table. The table has been specially modified to handle sheets with a maximum length of 4 metres. Its design prevents any scratches or scrapes on the surface of the sheet metal as well as significantly reducing noise levels. The balls built into the table also facilitate the loading and unloading of workpieces. The TRUMPF TC 5000 R CNC punching machine is extremely easy to opera ...

Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100 i Control -CE marking -Fanuc MXP 100i control -4th axle prepared -Year of construction 2008 / 1x previous owner very well maintained / original paint -Travel X / Y / Z 1270x520x540mm -Rapid traverses X / Y / Z 36m/min / 36 m/min / 24 m/min -Feed speeds approx. 945 IPM (inches per minute) -Distance - table surface to spindle nose 100-645mm -Work table 1350 x 520mm -Max. table load 1000 KG -Spindle speeds up to 10000 rpm -Spindle holder BT 40 -Spindle motor power 11.2 KW - Tool Changer (ATC) 24 stations / side mount type -Tool change time 3.5 se. (T-T) -Electric handwheel -RS 232 interface -Various tool holders -Chip conveyor -Spindle oil cooler -High pressure pump -Oil skimmer -Work light -Machine feet -Machine documentation Dimensions: L x W x H 3.5 x 2.4x2.2 meters / Weight 7000 Kg

AVIA FNE 50N CNC milling machine was built in 2016 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. This is all due to its reliable spindle, which can work both vertically and horizontally, with the same specifications. The AVIA FNE 50N is controlled by an advanced HEIDENHAIN control system, which is distinguished by its intuitive operation and numerous useful functions. The FNE 50N toolroom milling machine weighs 3000 kg. Technical specifications of the AVIA FNE 50N CNC milling machine General data - feed in the X/Y/Z axis: 800/500/420 mm - feed in the X,Y,Z axis: 5-2000 mm/min - rapid traverse in the X/Y/Z axis: 10/10/7 m/min - maximum workpiece weight: 500 kg - spindle rotational speed: 50-4000 rpm - spindle rotational speed adju ...

150 ton x 4000mm

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

DARLEY EHP-L 110 31/25 CNC hydraulic press brake was built in 2000 in the Netherlands by DARLEY B.V. The machine is in very good technical condition and has been regularly maintained throughout its service life. In December 2023, all cylinder seals and oil with filters were replaced by an authorised service. In February 2024, on the other hand a full service of the WILA top tool clamping system was performed. The DARLEY EHP-L 110 31/25 is used for precision machining of workpieces with a maximum length of 3100 mm. The high press force of 110 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most intensive challenges. The deflection arrow compensation function additionally ensures the desired angle along the entire length of the bent workpiece. The offer also includes an extensive equipment, consisting of, among others, DELEM’s adva ...

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition

Max Bending Length 2250mm Machine is in excellent condition - As New LOW HOURS

Large Format 3000 x 1500mm With Automation Siemens 840

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

CORMAK CK7150LT12x1000 CNC lathe was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. CORMAK CK7 is an extremely versatile machine designed for precision machining of parts made of non-ferrous metals, ferrous metals and non-metals. It is capable of performing operations such as turning of cylindrical, conical and end faces, as well as boring, grooving and threading. Workpieces with a maximum diameter of 500 mm are machined by means of driven tools and a spindle rotating at a maximum speed of 3000 rpm. The machine’s compact design ensures a high degree of stability during even the most intensive challenges, as well as facilitating daily operation and maintenance. All this makes the offered CORMAK CK7150 LT12 CNC lathe the best choice for companies specialising in the machine tool or automotive industry. The total weight o ...

KIMLA BPF 2030 CNC router was built in 2011 in Poland by POLCOM Przemysław Kimla. The machine was regularly maintained throughout its service life. In 2021, the ISEL 10 bearings along with the lead screw in the Z axis were replaced. KIMLA BPF 2030 is an excellent choice for both small and medium-sized companies with a diverse production profile. The machine enables precise machining of a wide range of materials, i.e. light metals, plastics and wood. After fitting a special cutting head, it is also possible to cut parts made of rubber and cardboard. All machining processes are performed on a large work table with an ergonomic design. The spindle, driven by a high-powered motor, rotates at a maximum speed of 24000 rpm and moves in three X,Y,Z axes with feeds of 2000 mm, 3000 mm and 500 mm respectively. Tools taken from a 10-position magazine are in turn continuously measured and calibr ...

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe  ...

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...