cnc table type used for sale

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.

Capping heads Zalkin different closure sizes

Extraction Dedusting Nedermann Type 663 with 2 extraction arms Very good condition, straight from production!

Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE

Knife sharpening machine clamping length 820mm V 380 kW 0.75

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm

Ref.nr: 00911 Name of the system Vertical Inside Broaching Machine The electromechanically driven broaching machine is suitable for the precise and economical production of internal profiles, keyways and gears. Thanks to their robust construction, very smooth running and automated process sequences, it is ideally suited for use in series production. Manufacturer: Frömag Model Type FSR 6-800 MZB-PPC Year of construction 2008 Holder for three broaching needles Hub 800 mm aVersion: Vertical internal broaching machine Pulling force: 60 kN Connected load: 15 kW Control: FRÖMAG Commander PP-10 Broaching tools: 3 pieces Machine Dimensions (L x W x H): approx. 1,050 x 900 x 3,800 mm Condition Fully functional, currently dismantled, but if necessary this can also be demonstrated with the agreement of the seller Submission date Immediately

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: Ø1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

The machine was dismantled at the end of 2021 and has been stored in a hall ever since. The packer is complete with control cabinet and its own compressor. The wiring to the control cabinet was documented during dismantling. Instruction manual on German is also available.

For sale Used cylinder heads. For Jenbacher 6 series F type gas engine. All in good condition and can be refurbished for re use. No cracks and no damage at all. We have 45 pcs at the moment and are available subject to prior sale

suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm

plastic belt for blocks of max. 600 x 600 mm belt width 600 mm adjustable outfeed height ± 1.900 mm + 500 mm infeed height : ± 800 mm total dimensions : ± 3.900 x 1.000 x 1.900 mm + (500mm adjustable) adjustable speed mobile

Offer 20142 Specifications: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed Ab + Auf infinitely variable - Projection 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

150 m pallet rack Jungheinrich type MPB Used goods very good condition, see pictures Height 3.9 m Depth 110 cm, blue Load 8.4 tons Beam length 2.7 m yellow Carrier with ballast /compartment 2400 kg Negotiation price: € 8.990,-- net from stock Offer consists of: + 52 pcs. frame pre-assembled, depth 110 cm, height 3.9 m +204 pcs. beam, length 2.8 m, 2400 kg ballast/compartment +408 pcs. Suspension locks +208 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale ...

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina

TRANSFER TYPE POWDER COATING LINE Curing oven - gas, diesel or electrical source Powder coating booth - cyclone type or cartridge filtered Powder coating equipment - manual or automatic system Overhead conveyor system - tracks trolleys and frull structure Contact us for quotation We provide the best technical solutions and competitive prices German speaking contact in Germany VOGAMAKINA Ltd.

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

800 x 600 470 mm 137 Piece(s)

800 x 600 445 mm 159 Piece(s)

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...