129,015 used machines on RESALE, but how to find them? Machine Search
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK ...
Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg
Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE ...
Cantilever rack, one-sided, frame height 2.60m height, 80cm deep arms, 750kg per arm, hot-dip galvanized - new - : Price from location incl. loading! Price: 1.515.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units out of them by omitting or buying additional frames (or also by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new product Description: - Shelf stand on one side 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - With 3 height-adjustable shelf arms each - Load capacity at centre of gravity 400 mm - 750 kg per arm / 2..250kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg P ...
Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant
Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...
Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...
Vertical -consol milling machine, used   Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional  x-way: 1190 mm  y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t Â
Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340
General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829
Stock# U2308-7 Used stainless steel contact parts polish made V type tumbling blender with total volume 4500 l. Working volume 3000 l. Mixer has two inspection/feeding inlets with bolted lids, each with diameter 450 mm. Central conical discharge with diameter 245 mm, with manually operated valve. There is an internal supporting shaft/baffle inside the mixing chamber. Machine is driven by el. motor 18.5 kW, 1480 rpm, 380 V, 50 hz, through belts and gearbox type WD650. Working rotation of mixing chamber up to 8 rpm. Supporting frames and operating platform designed in carbon steel. Includes technical documentation.
Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm
Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.
Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.
Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)
Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.
Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.
Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr
Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price
Kragarmregal, one-sided, 6.30m height, 1.20m arms, 900kg per arm - new product - : Price from location incl. loading! 1 shelf unit with 4 stands 2.995.-€ (net)! Transport costs within D (without islands): 340.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 900 kg per arm / 4,000 kg per stand at 4 stands per arm level 4 x 900kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE 100 with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard deli ...
Kragarmregal, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new product - : Price from location incl. loading! 1 shelf unit with 4 stands 2,795.-€ (net)! Transport costs within D (without islands): 340.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 4,000 kg per stand at 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: Frame: IPE220, Arms: IPE 80 with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard deliv ...
Kragarm regal, double-sided, 3.50m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1,750.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable each. Arms 1.20 m, 500kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 3500mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
Kragarm regal, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1.995.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable each. Arms 1.20 m, 750kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 4160mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
Kragarm regal, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1.900.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable each. Arms 1.20 m, 750kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 3500mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 750 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dime ...
Kragarm regal, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1,850.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable each. Arms 1.20 m, 500kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 4160mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...
Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC
New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand
25 Schäfer cantilever rack double-sided upright 6.5 m Used goods, good condition, see pictures Height 6.5 m (IPE300) Arm length 100 cm (IPE100) 1000 kg load per boom Column load 7000 kg Wheelbase 100 cm Frame grey (RAL5010), strap blue 8 outriggers per upright Negotiation price: € 990,-- net from stock per upright Art.Nr.: P10262 Also available as a double-sided cantilever rack. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
81 m cantilever rack double-sided upright 6.5 m Very good condition, see pictures Height 6.5 m Arm length 120 cm 500 kg load per boom Load capacity per stand per side 2000 kg Wheelbase 150 cm Stands and arms RAL 5010 8 outriggers per upright Offer consists of 4 frames – 4.5 running metres: + 4 st. upright with double foot 6.5m high. +32 pcs. Boom, arm length / boom 120 cm Diagonal struts, bracing and distances are included. Negotiation price: € 2,590,-- net for 4.5 linear meters P10263 Also available as a double-sided cantilever rack. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as we ...
Modern, precise production column drilling machine according to proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and standard chip breakage control. The digital display displays feed, speed and drilling depth. Turn switch Right/Left Run. Emergency-off-stroke button. Motor protection. Pre-configured machine with optional equipment thread cutting device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting power: M 20 Spindle: MK 3 Feed infinitely adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Extension: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor can be switched on pole: 0.8/1.5 kW Spindle speeds infinitely variable Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - ...
NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...
High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm
Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price
Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.
Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition
Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused
Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!
Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net
The shuttles were used until October 2021. Maintenance by the in-house technicians and Knapp is carried out regularly. The shuttles are neatly stored and can be called up at any time. There were originally over 70 shuttles in use. Just ask how many are still available. Containers of the sizes 60x40 cm and 40x30cm were used. It could be stored up to four times deep.
Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)
Extraction Fuchs TKFVA103 (filter in OEM quality) MA-105895-E Filter Activated Carbon TKFVA103 MA-105896-E Filter Cartridge FIPA
TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...
- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...
maximum number of results exceeded
please refine your search
