140,790 used machines on RESALE, but how to find them? Machine Search
Model : VTS-1620 CNC Vertical Lathe Year : 2013 Table : 1600mm manual chuck/10,000 kg load Table speed : 250 rpm Max swing : 2000mm Max cutting height : 1556mm X/Z : -127~1600mm/960mm Ram size : 308x250mm 37.5/45 kW motor 18 position ATC 8 tool holders Tool presetter Manual guide i Chip conveyor Fanuc control
Model : V550 CNC Vertical Lathe Year : 2012 Max cutting dia : 730mm Max cutting height : 730mm Table speed : 2000rpm 21" hyd. Chuck 10 Position Turret Gearbox Chip conveyor Fanuc control
pressure: 320 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 510 mm ram stroke speed: 140 mm/sec work speed: 8.0 mm/sec return speed: 130 mm/sec work stroke: 310 mm dayligth: 525 mm table height: 900 mm oil volume: 290 ltr. voltage: 400 Volt weight: 16500 kg range L-W-H: 4550 x 2450 x 3200 mm --------------------------------------------------------- CNC C SERIES electro-hydraulic press brake featuring: Increased daylight (open height) Extended cylinder stroke Increased throat depth Long-type full machine cover --------------------------------------------------------- Equipment: - DELEM CNC control, model DA-69T, with touchscreen/graphics 2D and 3D graphical programming via touchscreen Three-dimensional visualization, including a representation of the machine . during simulation and production 24-inch high-resolution TFT color display Compatibility with th ...
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 510 mm ram stroke speed: 150 mm/sec work speed: 9.0 mm/sec return speed: 140 mm/sec work stroke: 310 mm dayligth: 525 mm table height: 900 mm oil volume: 290 ltr. voltage: 400 Volt weight: 16300 kg range L-W-H: 4550 x 2450 x 2950 mm --------------------------------------------------------- CNC C SERIES electro-hydraulic press brake featuring: Increased daylight opening (installation height) Extended cylinder stroke Increased throat depth Long-type full machine cover --------------------------------------------------------- Equipment: - DELEM CNC control, model DA-66T, with touchscreen/graphics 2D graphical touchscreen programming 3D visualization for simulation and production 17 high-resolution TFT color screen Bending sequence calculation Product programming with true-to-scale visualization U ...
sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm down holder: 16 Stück no. of strokes: 9 - 17 Hub/min cutting angle: 0.5 - 2.5 ° throat: 150 mm table height: 830 mm oil volume: 250 ltr. weight of the machine ca.: 11.000 kg range L-W-H: 4150 x 2100 x 2450 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-length limitation Mate ...
sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 16 Stück no. of strokes: 10 - 19 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 830 mm oil volume: 140 ltr. weight of the machine ca.: 8.000 kg range L-W-H: 4150 x 2100 x 1900 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-length limitation Mater ...
sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 16 Stück no. of strokes: 10 - 19 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 830 mm oil volume: 140 ltr. weight of the machine ca.: 7.800 kg range L-W-H: 4150 x 2100 x 1900 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-length limitation Mater ...
sheet width: 2050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 10 Stück no. of strokes: 14 - 24 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 850 mm oil volume: 200 ltr. weight of the machine ca.: 6.500 kg range L-W-H: 2500 x 2250 x 1950 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-le ...
sheet width: 4050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 20 Stück no. of strokes: 10 - 19 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 830 mm oil volume: 140 ltr. weight of the machine ca.: 12.000 kg range L-W-H: 5150 x 2250 x 2200 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-l ...
used
7 axes: Y1 / Y2 / X1 / X2 / R / Z1 / Z2 Capacity: 400 ton x 4100 mm Backgauge: CNC Control: AMNC Passage between uprights: 3230 mm Max stroke: 350 mm Max distance between table -- ram: 620 mm Depth of throat: 420 mm Table width: 250 mm Locking speed: 75 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 38,5 kW Length: 5490 mm Depth: 2150 mm Height: 3415 mm Weight: 24,5 ton Capacity: 400 ton Bending length: 4100 mm
8 axes: Y1 / Y2 / X / X#39; / Z1 / Z2 / R / V Laser safe security front amp; back CNC crowning upper amp; lower willa tooling Easy Form Laser measuring system Capacity: 170 ton x 4100 mm Backgauge: CNC Control: Cadman B Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 100 mm/sec Working speed: 12 mm/sec Returning speed: 130 mm/sec Electric motor (power): 42 kW Weight: 14,5 ton Capacity: 170 ton Bending length: 4100 mm
engine lathe, year 1995, CNC Sinumerik 805. Used machine. More info & price on IndustrialBuyer.
x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle:: turning speed range - main spindle: 10 - 10.000 min/-1 power capacity - main spindel: 11 / 7,5 kW max. Torque: 70 / 48 Nm tool taper: BT 40 work table:: table surface area: 800 x 320 mm max. table load: 300 kg T-slots: 3x 14 x 100 mm distance spindle /table: 100 - 600 mm Tool-Presetter:: number of toolpositions: 12 pos. tool taper: BT 40 max. tool diameter: 70 mm max. tool weight: 6,0 kg change-time tool to tool: 7,0 sec feeds:: rapid traverse ( X / Y / Z ): 10 m/min feed speeds: max. 10.000 mm/min repeating accuracy: +/- 0,008 mm positioning accuracy: +/- 0,01 mm total power requirement: 15 kVA weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3,5 x 2,5 x 2,4 m Documents: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo ...
4 Roll plate bending machine dual initial pinch MG Italy 2000X6mm Mode CNC EASYCOM 4-AXIS NEW MACHINE serial no. 25072 Capacity: -Width of plate: 2000 mm -Thickness plate roll 6 mm -Plate pre-bend 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: hardened rollers, surface smooth finishing for all kind of plates and stainless steel Prebend process in manual and automatic full rounding no-flat plate ends Conical plate rolling cones and reducers hydraulic control dual initial pinch Driven rolls rotation hydraulic powered with axial gear unit plate dragging and forming . Console electric CNC with centralized commands joysticks , 4-axis position programming and readout. CNC controller interface touch screen 15”, 4 axis teach-in programming mode, infinite memory storage for automatic plate roll. On screen digital po ...
GENERAL Project No.: 906022 Quantity: 1 pcs. Manufacturer: EMAG ELDEC Type: Mind 750 L-CNC Control: Siemens 840 D solutionline Year of Make: 2016 Condition: Used machine Approx (hrs): 12534 You will be happy to receive the exact equipment description on request. We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during a viewing.
clamping plate: 595 x 445 mm drawing length: 400 mm stroke: 400 mm serial number: 890402 weight of the machine ca.: 1.600 t dimensions of the machine ca.: 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC SCREEN PRINTING MACHINE Balsfulland CNC 1500 H Manufacturer: Werner Kamann Model: CNC 1500 H Year of manufacture: 2008 Design: Fully enclosed safety cabinet with protective glazing Machine type: Multi-color CNC screen printing system CE certified: Yes Details: CNC-controlled axes Multi-color printing stations Automatic product transport system Fully enclosed safety housing Integrated drying / curing unit Designed for industrial serial production Heavy-duty steel / aluminum frame construction Application: Cosmetic containers Brochure stand Glass bottles Plastic packaging Cylindrical or slightly tapered products Industrial packaging components
grinding length: 5200 mm grinding width: 1300 mm workpiece height: 320 mm Control: Siemens 840 D main drive: 306 kW total power requirement: 380 kW weight of the machine ca.: t dimensions of the machine ca.: 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grindin ...
- Year of manufacture: 2019 - Serial number: 8404 - Maximum rotor disc diameter: Ø750 mm - X-axis travel: 700 mm - Y-axis travel: 400 mm - Z-axis travel: 400 mm - A-axis swivel range: 360° (continuous rotation) - B-axis swivel range: ±87° - Fast feed of the X-axis: 62 m/min - Fast feed of the Y-axis: 62 m/min - Z-axis fast feed: 62 m/min - A-axis fast feed: 200 rpm - B-axis fast feed: 60 rpm - Maximum spindle speed: 18,000 rpm - Spindle motor power: 28 kW - Torque at 100% load: 181 Nm - Spindle taper: HSK-A63 - Tool magazine capacity: 62 ATC positions - Maximum tool diameter: Ø150 mm - Maximum tool length: 250 mm - Maximum tool weight: 6.5 kg - Tool change time: 8 s - Tool change system: double gripper - Overall length: 5000 mm - Overall width: 3260 mm - Overall height: 3200 mm - Machine weight: 12,000 kg ...
- 4 bed way construcion width 1800 mm - 4 chuck 1200 mm rotation 445 Rpm - Baruffaldi TOEF 400 Turret - Axial station Sk50 with 1580 Rpm and 18.3 kW - Radial station Sk50 with 1580 Rpm and 18.3 kW - C-Axis 360.000 Positions - Y-Axis + 5 mm to - 23 mm - Measuring system: - X Axis optical LS 107 - Z Axis optical LB 326 - Y Axis optical MT60K - C Axis encode ROD 1850 - Thread cutting ROD 1850 - SIEMENS SINUMRIK 820T (4 Axis X, Y, Z and C) - Linear interpolation - Circular interpolation - Boring bar support for 150 x 1500 mm - Steady rest C-Type 150 - 500 Load 8000 Kg - Steady rest C-Type 400 - 850 Load 8000 Kg - Steady rest RING 150 - 650 Load 10000 Kg
used
x-travel: 700 mm y-travel: 315 mm z-travel: 495 mm Control: Heidenhain TNC 426 tool piece magazine with: 32 x SK 30 turning speed range: 50 - 9.200 U/min quill travel: 180 mm feed: 19.000 mm/min spindle drive: 10 kW total power requirement: 20 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,52,53 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter:5,,,,40 mm drilling length:600 mm lip angle:90-150 ° total power requirement:4,5 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill
total power requirement:413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30
max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm
rotor dia:30-500 mm hobbing length:500-1000 mm total power requirement:80 kW weight of the machine ca.:15 t dimensions of the machine ca.:3,6 x 2,5 x 3,0 m max. module:8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel
max. wheel diameter:130 mm max. module:3 total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mm Accessories : Hydraulical workpiece clamping ...
groove width:- mm x-travel:1300 mm throat:- mm y-travel:150 mm z-travel:150 mm spindle speed::50/6000 upr tool taper:SK 40 numbers of positions in the tool changer:8-fach weight:2.500 kg Operating hours: 2,100 h Clamping hydraulics Pendulum operation possible 8-position tool changer
distance spindle /table:min /max 190 / 570 mm distance spindle /table:190 - 570 mm surface area:650 x 300 mm Boring power:in GG 20 40 mm bore capacity in steel:ST 60 32 mm turning speed range::50 - 5000 UpM total power requirement:2,2 kW threading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kg table load:max. 150 kg table height:770 mm traversing speed:max X-, Y- u. W-Achse 5 m/min max. traversing speed:Z-Achse 3 m/min w-axis:380 mm workpiece height max.:495 mm tool changing time:ca. 3 sec x-travel:450 mm y-travel:300 mm z-travel:180 mm workpiece weight:1,5 kg
grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden
faceplate diameter:1600 mm swing diameter:1800 mm turning height:1500 mm max. ram stroke:1200 mm faceplate turning speed range -stepless-:2,5 - 250 U/min workpiece weight max.:10.000 kg ram head dimension:240 x 240 mm feed range:1 - 3000 mm/min power capacity:45 kW weight of the machine ca.:20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders
grinding length:1250 mm grinding width:600 mm workpiece height:730 mm table surface area:1720 x 500 mm headstock: dist. table - spindle center:900 mm max. longitudinal movement:X-1450 feed range:10 - 20.000 mm/min vertical movement:Y-730 mm feed range:0,2 - 3.000 mm/min cross travel:Z-550 mm feed range:5 - 5.000 mm/min power capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/min cutting speed:max. 80 m/sec. weight of the machine ca.:11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING grinding length: 1600 mm grinding width: 900 mm workpiece height (max) with largest wheel: 600 mm number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING) table surface (left-right): 1600 mm table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE X-axis travel: 1700 mm spindle revolutions (max): 1000 /min GRINDING TOOL type of grinding tool: wheel diameter (max): 500 mm borehole: diameter: 203.2 mm width: 100 mm ELECTRICAL SPECIFICATIONS total power consumption: 30 kW mains voltage: 400 V mains frequency: 50 Hz
Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M
Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma
Manufacturer: BURKHARDT + WEBER GmbH Model (Typ): MC 100 S0 Machine Type: CNC Horizontal Machining / Boring Center (floor-type) Country: Germany Delivery Date: July 1992 Series: MC Series (Modular Machining Centers) Travels X (Column travel): ~3,000 – 5,000 mm Y (Vertical): ~2,000 – 2,500 mm Z (Ram): ~800 – 1,200 mm W (Spindle quill): ~500 – 800 mm Spindle Diameter: 100 mm (this is what MC 100” refers to) Spindle Taper: ISO 50 / SK50 Spindle Speed: ~2,000 – 3,000 rpm Main Motor Power: ~30 – 50 kW Auction-ID: A1-51153-37
incl. accessories, consisting of: e.g. 1 RENISHAW - OMP 60 - Probe 1 tool presetting device 1 turntable for 5th axis various tool holders and spindle tools, ATTENTION: The buyer is responsible for the disassembly, loading and transport of the machine himself Auction-ID: A7-51326-1
Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip pan - Documentation x-travel 760 mm y-travel 381 mm z-travel 450 mm Quill stroke 152 mm Table size 1300 x 305 mm Control Heidenhain TNC 360 Mounting SK40 Speed range 100- 4,000 rpm Rapid traverse speed 5000 / 7000 m/min Feed speed 2.5 to 3000 mm/min Drive power 2.2 kW Quill diameter 101 mm Total power requirement 15.0 kW Machine weight approx. 2.4 t Dimensions L x W x H 2.4 x 2.3 x 2.2 m Auction-ID: A7-51438-587
DROOP & REIN FS 130 G – CNC Vertical Milling Machine Manufacturer: Droop & Rein (Germany) Model: FS 130 G Year: 1978 Machine Type: Heavy-Duty CNC Vertical Milling Machine CNC Control: Fagor Manufacturer Droop & Rein Model FS 130 G Year of Manufacture 1978 Machine Type CNC Vertical Milling Machine CNC Control Fagor Number of Controlled Axes 3 (X, Y, Z) Spindle Orientation Vertical Table Type T-Slotted Milling Table Spindle Head Vertical Milling Head Electrical Supply 380 V / 50 Hz Control Voltage 42–60 V Rated Current 120 A Order Number 04790 Country of Manufacture Germany Equipment and Features - Fagor CNC control panel - Fagor servo drive modules - Heavy-duty vertical milling head - Large T-slotted worktable - Automatic axis feed system - Centralised lubrication system - Electrical cabinet with technical documentation - Industrial steel and cast-iron construction Specification Refe ...
CNC lathe HEYLIGENSTAEDT HEYNUMAT 21U x 2000 Robust horizontal CNC lathe, manufactured by Heyligenstaedt & Comp. GmbH in Giessen, Germany. A 2-axis machine equipped with a FANUC 0T series control , suitable for medium and large-scale turning operations. Technical data Manufacturer Heyligenstaedt & Comp. GmbH Córdoba Heynumat 21U x 2000 Year of manufacture 1981 Machine type Horizontal CNC lathe, 2 axes Nominal working length 2.000 mm Turnable/swing diameter Approx. 719mm Maximum spindle speed 2.240 rpm Spindle power Approx. 55,9 kW / 75 hp Bar capacity Approx. 76mm tool tower 12 positions CNC control FANUC 0T series Source Giessen, Germany Availability In stock The photographs show auxiliary equipment and tooling associated with the machine, including the KNOLL Filtron 300S-2 filtration system . Auction-ID: A1-51153-4
DROOP & REIN FS 130 G – CNC Vertical Milling Machine Manufacturer: Droop & Rein (Germany) Model: FS 130 G Year: 1978 Machine Type: Heavy-Duty CNC Vertical Milling Machine CNC Control: Fagor Manufacturer Droop & Rein Model FS 130 G Year of Manufacture 1978 Machine Type CNC Vertical Milling Machine CNC Control Fagor Number of Controlled Axes 3 (X, Y, Z) Spindle Orientation Vertical Table Type T-Slotted Milling Table Spindle Head Vertical Milling Head Electrical Supply 380 V / 50 Hz Control Voltage 42–60 V Rated Current 120 A Order Number 04790 Country of Manufacture Germany Equipment and Features - Fagor CNC control panel - Fagor servo drive modules - Heavy-duty vertical milling head - Large T-slotted worktable - Automatic axis feed system - Centralised lubrication system - Electrical cabinet with technical documentation - Industrial steel and cast-iron construction Specification Refe ...
Ref. -No.: 10721 Manufacturer: DOOSAN Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Southkorea X-Travel: 4.000 mm Y-Travel: 2.000 mm Z-Travel: 1.600 mm W-Axis: 700 mm Bore Spindle Diameter: 130 mm Spindle Taper: BT 50 Table Load: 15.000 kg Milling Spindle Diameter: 240 mm Spindle Speed: 2.500 RPM round table: 1.800 x 2.000 mm Further information: INCLUDED EQUIPMENT & ACCESSORIES Electronic handwheel Chip conveyor 3-colour signal light (green, red, yellow) Spindle cooling unit External coolant system Through-spindle coolant (TSC), 15 bar Foundation bolts and mounting pads Maintenance tools and tool cabinet Chip protection covers (Type A+B, table and operator side) ADDITIONAL INFORMATION Machine colour: Manufacturers standard The machine is offered including the equipment and accessories listed above.
Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis
Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible.
Offered is a CNC knee-type milling machine, model FU 400 × 1600. Clamping surface: milling table with T-slots. CNC control: VEB Numerik CNC-H 646. Equipped with a machine vise, flexible coolant hose and swiveling CNC control panel. Inspection possible by arrangement.
Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible.
Controls: Mitsubishi, weight: 2.2t. Equipment: main spindle with guide bush system, counter spindle, two C axes, several driven tools, front machining and rear side machining, tool block for cross machining, automatic parts catcher, bar feeder connection, tool cabinet with original setting tools, spindle monitoring EWL 4444, high pressure coolant supply, extraction connection. An on site inspection is possible.
Max. turning diameter: 12mm, max. turning length: 200mm, rated current: 40A, mains voltage: 200V, connected load: 8kVA, weight: 2.1t, with sub spindle, driven tools. An on site inspection is possible.
Ref. -No.: 10663 Manufacturer: UNION Year of construction: 2003 Type of control: CNC Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 3000 mm Z-Travel: 1000 mm W-Axis: 700 mm V-axis: 1500 mm B-Axis: 360 ° Bore Spindle Diameter: 150 mm Number of gear stages: 2 Max. Tool Weight: 30 kg Max. Tool Length: 500 mm Workpiece Diameter At Full Load: 125 mm Workpiece Diameter With 2 Vacant Positions: 250 mm Turning Speeds: 2800 RPM Max. Torque On The Boring Spindle: 1751 Nm Max. Torque: 2415 Nm Rapid Traverse X-Axis: 15 m / min Rapid Travel Y-Axis: 15 m / min Rapid Traverse Z-Axis: 15 m / min Rapid Traverse (W-Axis): 15 m / min Table surface: 2000 x 2500 mm Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement. UNION PCR 150 CNC 840 D – horizontal boring ...
maximum number of results exceeded
please refine your search
15.000 € 
