cnc table type used for sale

Specifications: Manufacturer: Spinner Type: SB-CNC Year of Make: 1998 Control: Siemens 840D Travels: X 250 mm Z 285 mm Switch-on hours: 32,156 h Main spindle: Spindle speed: 5,000 rpm Spindle passage: 42 mm Tool holder: Tool holder: Multifix A on linear beam Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Collet chuck Interface for bar feeders The machine has a headstock elevation of 10 mm.

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

x-travel: 400 mm y-travel: 330 mm z-travel: 350 mm total power requirement: 6,3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 736 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

!bargain price!

• Height of centers 750 mm • Distance between centers 5000 mm • Diameter on the bench 1500 mm • Diameter on the carriage 1050 mm • Main engine power 75 Hp • Baruffaldi BA 300 4-position automatic turret • CNC ECS 2400 • Hydraulic chuck • Max. permissible weight between the tips without steady rests kg. 15000 • Max. permissible weight on the platform, cantilevered, with centre of gravity at 300 mm: kg. 3800

Cutting lenght 6000 mm Cutting thickness 13 mm

Spare parts Siemens 810 GA2 CNC numerical control + Simodrive 611 power supply and drives It can be inspected in our warehouse in Gussago BS Mimu Machine Tools

FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.

Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

sheet width: 3100 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0.05 - 2.0 ° throat: 350 mm table height: 900 mm total power requirement: 22.0 kW weight of the machine ca.: 13400 kg range L-W-H: 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=K4ymYMIJ7_Y ----------------------------------------------------------- Robust electro-hydraulic CNC sheet metal shear with slide guides Includes CYBELEC DNC 60 CUT control system Includes CNC electro-hydraulic cutting gap adjustment Includes CNC electro-hydraulic cutting angle adjustment ---------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes C ...

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture : 1998 Specifications: X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : Siemens Sinumerik

Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC turning diameter over slide: 880 mm turning diameter over bed: 1220 mm tail stock: M80 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm spindle turning speed - stepless: 0 - 1000 U/min spindle motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m complete retrofit in 2020 - CNC Control Fagor 8055 TC - Tool holder turret:SAUTER model 0.5.320.025, vertical axis - Chip Conveyor - 4-jaw chuck Ø1000 mm - 3-jaw chuck Ø500 mm - Steady Ø500 mm - Movable bezel Ø250 mm - Special bar for machining very long interiors - Coolant RETROFITTING IN 2020 • Grinding of carriage guides on the X and Z axes • Preloading of X and Z axis ball screw nuts • New Turcite placed on the X and Z axis carriages • General review and disassembly of the engine and head regula ...

x-travel: 400 mm y-travel: 320 mm z-travel: 450 mm Control: Haidenhain TNC 124 drive of main spindle: 3 kW number of spindle speeds: 63-3150 u/min tool taper: SK 40 stroke of quill vertical: 60 mm feed speeds: 5-2000 mm/min rapid traverse: 2 m/min work table:: 800x320 mm coolant: 20 l/min total power requirement: 5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,2x2,4x1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation.

CNC portal machining center Type: FVP 50 CNC Manufacturer: TYC Year: 2006 Control: Heidenhain X: 1400 mm Y: 200 mm Z: 600 mm Max spindle speed: 15000 rpm Tool holder: ISO 40 Table: 1600 × 1000 mm Max workpiece weight: 4000 kg Passage between columns: 1250 mm Shut hight table-crossbar: 700 mm Machine weight: 9500 kg In good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.

overhauled: 2025 Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1760mm Axis Z ... 1000mm Plunger Cut... 180x220mm powered tools ... 15 Number of positions in the tool changer ... 15 Axis C ... 360° cooling ... 20bar Main engine power ... 60kW Speed of the clamping table surface ... 2-200 rpm Speed of driven tools ... 8-3300 rpm Motor power of driven tools ... 19.5kW Machine weight ... 27200kg L x W x H ... 5700x7000x5900mm The machine is completely overhauled. More info on request. With one-year warranty.

CNC vertical machining center Type: FVC 120 CNC Manufacturer: TYC Year: 2005 Control: Heidenhain X: 2200 mm Y: 1700 mm Z: 900 mm Max spindle speed: 24000 rpm Tool clamping: HSK-A63 Tool magazine: 32 positions Maximum tool length: 300 mm Maximum tool diameter: 150 mm Maximum tool weight: 6 kg Dimensions: 8900 x 7350 x 5100 mm Machine weight: 30000 kg In good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

TBI MVC 1890 CNC vertical machining center was built in 2023 in Poland by TBI Technology Sp. z o.o. The machine has worked very little over its service life. During the last maintenance, the spindle was replaced with a new one worth €10 000. The MVC 1890 CNC machining center on offer is an excellent choice for machining heavy workpieces with a maximum weight of 2500 kg. The state-of-the-art technical solutions used in it guarantee the best precision and efficiency. These include, among others, a reliable, high-speed main spindle. Thanks to its temperature stabilisation (oil cooling), the spindle does not deform thermally and maintains a constant temperature during heavy-duty, high-speed operation. The cutting tools, on the other hand, are continuously cooled during the machining operation, which increases their overall durability. All axes are driven by efficient digital drives w ...

Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg

turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis QUICK CNC UE-481PL was manufactured in 2025. It features a robust heavy-duty base, a large working area of 2100 x 3050 x 200 mm, and a 9 kW HSD milling spindle capable of 24,000 rpm. Additional highlights include a 12-fold linear changer, dual 250 m3/h Becker vacuum pumps, and a wireless control panel. If you are looking to get high-quality CNC machining capabilities, consider the QUICK CNC UE-481PL machine we have for sale. Contact us for more information.

Key data: 28 t, 1000 mm

Hydr. CNC Press Brake BOSCHERT Type Profi 28 CNC with various bending tools Weight approx. 3000 kg

This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information.

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

This 4-axis QUICK CNC UA 481 was manufactured in 2025. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, its ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine.

grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details.

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions