135,911 used machines on RESALE, but how to find them? Machine Search
A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible.
turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...
Inv. Num. : 8549 Type: Cutex-160B MC Producer: Hwacheon Created: 2017 Parameters: Control system: FANUC 0i-SERIES (TF) Max. turning diameter: 260 mm Maximum turning diameter over bed: 550 mm Maximum spindle speed: 4500 1/min Lathe chuck diameter: 200 mm Weight: 3280 kg
Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.
Collet Chuck Kitagawa DHP65 A8 New in the box For type Hainbuch collets
A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.
CMZ TTL-66-66-T1Y-T2Y+GL20II CNC Lathe GENERAL Project No.: 905769 Quantity: 1 pcs. Manufacturer: CMZ Type: TTL-66-66-T1Y-T2Y+GL20II Control: Fanuc 31i B Year of Make: 2021 Condition: Used machine Approx (hrs): 9050 DESCRIPTION TURN Max. turning diameter 220 mm Max. workpiece length 614 mm Max. circumferential diameter over bed cover 240 mm Max. chuck diameter 210 mm Max. distance between the two spindle lugs 800 mm Max. speed main spindle 4000 1/min Max. power main spindle at ED 10-40/100% 35.5/23.5 kW Max. torque main spindle at ED 10-40/100% 205/150 Nm Spindle aperture main spindle 72.5/66 mm Spindle diameter in the front bearing main spindle 110 mm Spindle flange size main spindle ASA 6 A2 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Stop device in the main spindle Coolant supply through the main spindle Max. s ...
A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.
: 0583 mm : 1710 mm : : 82 mm : 436 mm : 2500 U/min : A1-8 DIN 55026 : 100 mm : 235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1010 mm, 3000 mm
Cycle lathe Seiger SLZ 1000 Year of construction 2009 Cycle lathe Seiger SLZ 1000 Year of construction 2009 Center width 3000mm Circulation over bed 1010 Circulation via face slide 650 Drive at 100% ED 37KW at 60/ ED 52KW Max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z Feed force max 16000N Control Heidenhain Manual Turn with face plate and steady rest The offer is aimed exclusively at tradespeople within the meaning of §14 BGB
Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...
Inv. Num. : 8568 Type:- Producer:- Created: 1980, GO 2025 Parameters: GO 2025: Complete replacement of the electrical system Addition to the NC control system Replacement of hydraulics (servo drives) Fortuna for internal grinding Rotary Table X Replacement of worn parts Grinding the bed
Key data: 160 t, 4000 mm
160 ton x 40000mm Multi Axis CNC
Key data: 3000 mm, 1500 mm, 4000 W
3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading
Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - .ucymachines/ Contact us at - sales@ucymachines
Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.
DMG MORI CTX Beta 2000 CNC turning center was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarantees the achievement of high repeatability of the manufactured parts. Thanks to additional function packages, it is possible to perform, e.g. precise gear milling or polygon turning. All machining processes are performed inside a large working area by means of a reliable spindle and cutting tools taken from a 12-position turret. The tailstock coupled to the Z-axis moves collision-free on separate sliding guides, mounted on a bed of high thermal stability. This bed is excellent at reducing the influence of heat, while increasing the life of all components and tools. Over its service life, the machine has worked for a total of 6219 hours. ...
Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD
A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 1000mm/1500mm/800mm, max. length measurement error: 1.5 + L/375, max. single-point error: 1.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
weight of the machine ca.: 3,9 t : 50 control: Fanuc changer: 6 fach centre distance: 1500 mm spindle bore: 80 mm available since 22th of september: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Series F2 4-part system: 4 tools engaged at the same time 15 axes System 1: 5 swivels 12 x 12 mm System 2: 8 driven tools (turret system 4) System 3: 16 tools (up to 16 of which are driven) System 4: 8 driven tools (tool turret system 4) C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing up to 37 tools (32 driven)
3-part system: 3 tools engaged at the same time 12 axes 4-fold transverse machining up to 35 tools (26 driven) System 1: 6 turnings 12 x 12 mm or 5 x 16 x 16 mm, 4 driven tools transverse System 2: Y2 axle at the back (3 fixed + 6 driven tools) System 3: 2 x 8 station turrets with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing C-axis on turret + freely programmable angle adjustment
Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
A CNC 5-axis high-speed milling machine Wissner is available. Travel path X/Y/Z: 600mm/500mm/350mm, max. workpiece weight: 460kg, table dimensions X/Y: 700mm/600mm, tool holder: HSK-F63. Machine dimensions X/Y/Z: approx. 2500mm/2950mm/1850mm, weight: approx. 3500kg, control: CNC HSC 6000. Includes Schunk NSE Plus 138-V1 zero-point clamping system, SPA 40 RF clamping pins, Hyfra Chilly 35 cooling system, air blast function, and tool measuring system. Documentation available. An on-site inspection is possible.
Key data: 465 mm, 1050 mm, 3500 1/min
Specifications: Manufacturer: Gildemeister Type: CTX 510 Year of Make: 2006 Control: Siemens 840D ShopTurn Travel distances: X 300 mm, Z 1,050 mm Working spindle Speed: 3,500 rpm Spindle bore: 95 mm Rotary diameter: 465 mm Deh length: 1,050 mm Tool/movement Tool turret: 12-speed Tool holder: VDI 40 Circumferential diameter: 680 mm Dimensions and weight Weight: 7,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tailstock Conveyor automatic door Three-jaw chuck 315
Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.
Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS
Pallet dimensions X/Y: 630mm/630mm, max. table load: 2x1200kg, travel path X/Y/Z: 1000mm/800mm/850mm, spindle speed: 5000rpm, spindle taper: BT50, spindle power: 15kW, tool positions: 60, rapid traverse: 15m/min, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 5400mm/3600mm/2900mm, weight: approx. 17500kg, control: Tosnuc T-800M. Documentation available. An on-site inspection is possible.
Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible.
control: SIEMENS 840D SL ShopTurn turning diameter: 700 mm swing over bed: 900 mm turning length: 3065 mm c-axis: indexing: 0.001 ° turning speeds: -2500 U/min tool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mm rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 30 m/min Overall size: 4450x2100x2350 mm rapid traverse Z-axis: m/min weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
frequency: 50 Hz weight of the machine ca.: 2,510 t dimensions of the machine ca.: m 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30 x 14.3 Max Table Load: 550 LBS X Axis: 24 Y Axis: 12 Z Axis: 20.47 Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
STIGAL DYNAMIC SPEED HQ plasma cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for precision cutting of sheet metal with a maximum thickness of 50 mm. The machining process is performed by a reliable plasma torch, which is powered by a CEBORA plasma source of the highest energy efficiency. Depending on the material type, high quality gas mixtures, i.e. oxygen, air, nitrogen and argon, are used in the cutting process. All this is complemented by an intuitive CNC control in which even the most advanced machining programmes are created in just a few steps. All this makes the offered STIGAL plasma cutting machine an excellent choice for both small businesses as well as large industrial plants. The total weight of the machine is approximately 2000 kg. Technical specifications of the STIGAL DYNAMIC SPEED HQ plasma cutting machine - operator panel ...
Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine ...
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor
weight of the machine ca.: 6,6 t control: monforts control : 2 centre distance: 3010 mm centre height: 310 mm tail stock: ja cooling: ja dimensions of the machine ca.: 5000-1600 mmxmmxmm spindle bore: 70 mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
Key data: 6300 mm, 11200 mm, 4800 mm
Completely retrofitted Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations Technical characteristics: Face plate diameter 6300 mm Max. swing with moved out arm 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. diameter of work piece clamped on floor grid (for internal processing) 14700mm Infinitely variable rotation of the faceplate 0.5 – 20rpm Max. work piece weight 100ton Milling spindle max. speed : 1000rpm 2 speed gear box with 15KW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and supplied wi ...
Technical details shown on picture. Parts shown by hand not come.
maximum number of results exceeded
please refine your search
