cnc step used for sale

Single envelope tank, 2 mixing accessories as well as the stirring/kneading accessory, Elec: 340 V / 50 Hz / , 1/min: 1420 / 2800, Tank capacity : 12 litres , Charge capacity: 2 to 8 litres max , Capacity of the tank : 12 liters

Stephan UM44-3 Universal Machine Double coat Temperature sensor Timer Vacuum Pump and Setup Dome on the lid for mounting a feed device or pressure relief valve 3 speeds Knife insert + mixed insert Oil for vacuum pump and instruction manual

Stephan UM44-S Universal Machine two speeds, 1410 + 2820 rpm + engine brake! Membrane keyboard with impulse switch with knife insert Machine tiltable for removing the processed medium Machine is in good condition and runs neatly and smoothly at both speeds, but should be thoroughly cleaned before use Video about test run available

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 31 rpm -Power: 0.37 kW -1x Type: FZOD044S -3x Type: FZOD71N13-4 -Design: B14 -Shaft diameter: 25 mm -Protection class: IP 33 -Number: 2x geared motors available Price: per piece -Dimensions: 380/170/H120 mm -Weight: 15 kg

adjustable gear motor, electric motor, three-phase motor -Motor type: FNDeA34s -Gearbox type: 2V4M -Speeds: 11-98 rpm -Power: 0.09 kW -Construction: B3 -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 320/105/H165 mm -Weight: 6.9 kg/piece

Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

General SKU269Y417 MakeStephan LocationBarneveld CEcheck TypeTK 160 Main Features MaterialStainless steel Volume150 Ltr. Motor24 KW Specified Features - Cutter Cuttercheck Capacity30—100 l. (150 l.) Diameter680 mm Depth425 mm Knife diameter350 mm Number of knife blades3 With scraper2,2 kW, 380 V, 1400/21 rpm Inlet250 x 250 mm Outlet330 x 280 mm Motor15/24 kW, 380 V, 750/1500 rpm Speed26 rpm Capacity800 kg/h MaterialStainless steel General No.723.579 Year of construction1997 Mounted on framecheck With switch(as is) With switchgear(as is) Floorspace2,18 x 1,50 m Total height1,58 m Weight1130 kgConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberCuttersNew arrivalsStephanIndustries > Recycling > Consumer wasteIndustries  ...

Height=0.78 m, Overall length= 0.97 m, Overall width= 1.43 m, Net weight= 223 kg,

With possibility to add vacuumpump., Bowl: 44 litres, Capacity: max 30 litres, Knives: 3 speeds on knives, max 3000 RPM, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 550 x 800 x 1200 mm, Weight: 150 kg

Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...

Stephan UMC 12 Cutter – Complete set with temperature control unit, vacuum pump & water separator, ready for immediate use Key data: Manufacturer: Stephan (A. Stephan u. Söhne GmbH, Hameln) Type: UMC 12 Masch.-Nr.: 719.908.01 Year of Make: 1993 Bowl capacity: 12 litres Motor: 1.5 / 1.9 kW, two speeds 1,400 / 2,800 rpm Connection: 380 V, 50 Hz, IP 54 Made in Germany Description: A fully functional Stephan UMC 12 is offered as a temperature-controlled complete vacuum system for mixing, crushing, emulsifying and thermizing under vacuum. Working under vacuum ensures bubble-free, homogeneous emulsions and creams without air entrapment and protects oxidation-sensitive products – ideal for laboratories, pilot plants, food development as well as cosmetic and pharmaceutical applications. The machine is currently fully operational and can be demonstrated on site. Bowl, lid an ...

Flott SB M3 ST Pillar Drilling Machine. 3-speed 380V motor, runs smoothly. Spindle speeds are steplessly adjustable via the variable speed drive. Speeds adjustable from 200 to 2000 RPM. MK3 spindle taper. Quick stroke: 120 mm Drilling depth is adjustable. Table: 400 x 320 mm Table height is adjustable. Includes Röhm 3 to 16 mm drill chuck. Includes vise. Spindle guard. Emergency stop switch. Made in Germany. Machine is in good, well-maintained condition. Overall dimensions: 60 x 40 x 182 cm

Stephan UMC12 Universal machine with frequency converter in the control cabinet and thus infinitely variable speed 150-3000rpm. With double jacket and stainless steel lid with feed tap. Digital temperature display, sensor integrated in the boiler Can be tempered by means of a water bath on the customer's side and can also be operated under vacuum by means of a vacuum pump (both not included). Video about test run available

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tools Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control Panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Stephan UM/SK 150 Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 1x cutting blade, maximum working pressure in the bowl -1 / 0,8 bar, maximum temperature in the bowl 110 °C, vacuum connection on the bowl, mounted on the lid a scraper agitator for the wall, electric driven (1,5 kW - n1: 1.410 rpm - n2: 25 rpm), 2 manual tightening clamp,hydralic cylinder for easy opening the lid, tiltable for emptying the bowl (no pneumatic outlet valve). Main motor for the cutting knife, integrated vacuumpump and a stainless steel control panel with Siemens S5 PLC and Siemens operation panel. Several spare parts included., Type of ...

The Stephan UM 60 (E) is a universal mixing machine or a universal cutter for processing a wide variety of foods., It combines cutting, mixing, emulsifying and homogenizing in a single working process., Machines of this model series are frequently used in meat processing, delicatessen production, dairy industry, and by producers of convenience products., Typical applications include sausage meat, cream cheese, processed cheese, hummus, mayonnaise, dressings, dips, vegetable preparations and plant-based foods., Thanks to the two speed levels (750 and 1,500 rpm), the machine is suitable for both coarse shredding and fine emulsification of delicate products., Equipped with the classic two-wing, coarsely toothed Stephan cutting knife.

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

Description Item # 9180 – CHOCOLATE TANK Manufactured by STEPHENS Reference Number PP370 12-Tonne Capacity, 2 x 6-Tonne Capacity sections Mild Steel, Jacketted With Motor & Stirrer Approx.2400mms diameter Approx.2600mms high + 500mms high feet

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Stephan UMC5 Universal Machine used Bowl capacity: 5 litres Double coat PT100 Probe Frequency Inverter 300-3000rpm Temperature control unit Vacuum pump Knife insert Traces of use present, should be thoroughly cleaned before use. Machine is fully functional and runs neatly and smoothly. Video about test run available

Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top valve (DN125) and bottom valve (DN125), lid, frame, side covers are all made of stainless steel. The bowl is equipped with double jacket for heating/cooling on the jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, 3x double blund knives , max. working pressure in the bowl -1 / 0.3 bar, maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x valve at the top for the main product, 1x outlet valve at the bottom for the outlet of the finished product, CIP Spraybowl inside the bowl, 1x connection for pneumatics controlled ingredient valves on the side of the bowl with valve. Vacuum tank on top. Double-walled lid with scrap ...

Universal machine Manufacturer : Stephan Type: KG 150 Technical specifications : The machine is suitable for slicing, grating, grating, shredding, straining and whipping Hourly output 300 – 800 kg/h Agitator with 2 speeds 142/284 rpm Stainless Steel

General SKU291Y499 MakeStephan TypeVCM 25 No.C 2554 Year of construction1983 Mounted on framecheck Main Features MaterialAluminium/Stainless steel Volume25 Ltr. Motor4 KW Specified Features - Cutter Bowl cuttercheck Capacity25 l. Diameter420 mm Depth250 mm Knife diameter260 mm, 280 mm, 320 mm With scrapercheck Can be tiltedcheck Motor4 kw, 380 V, 2900 rpm Speed1440/ 2900 rpm MaterialAluminium, Stainless steel 1.4301 (304) General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace0,8x0,6 m Total height1,1 m Weight150 Extra SpecificationsWith toolingConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberCuttersStephanIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > C ...

General SKU291Y509 MakeStephan Serial72207801 TypeUM/SK 5 Year of construction1995 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor0.75 KW Specified Features - Cutter Bowl cuttercheck Capacity5 l. Diameter220 mm Depth140 mm Knife diameter150 mm Number of knife blades1 With scraper(manual) Inletø 25 mm Outletø 15 mm With jacket( 0,7 l.) Max. temperature95 °C Motor0,75 kW, (400 V, 3000 rpm) With variable speed drivecheck Speed300—3000 rpm Materialstainless steel 1.4000 (aisi 429), Stainless steel 1.4306 (304L) With jacketcheck General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchgear(as is) Floorspace1 x 1 m Total height1,45 m Weight300 kg Extra SpecificationsWith temperaturen control bath: Haake D8 (as is)Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersFeed additi ...

General SKU291Y547 MakeStephan TypeUm 12 No.714.381.07 Year of construction1989 Main Features MaterialStainless steel Volume12 Ltr. Motor1.9 KW Specified Features - Cutter Cuttercheck Bowl cuttercheck Capacity12 l. Diameter300 mm Depth200 mm Knife diameter190 mm Number of knife blades2 With scrapercheck Inletø 300 mm Outletø 300 mm Motor1,5/1,9 kW, 440 V Speed720—3400 rpm MaterialStainless steel 1.4016, Stainless steel 1.4301 (304) General LocationBarneveld Floorspace0,36 x 0,40 m Total height0,6 m Weight170 kgConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberCuttersNew arrivalsStephanIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Chemical > A ...

General SKU291Y508 MakeStephan TypeUMC 12-F No.719.063.01 Year of construction1992 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume12 Ltr. Motor1.8 KW Specified Features - Cutter Cuttercheck Capacity12 l. Diameter320 mm Depth200 mm Knife diameter200 mm Number of knife blades1 With scrapermanual Inletcheck Outletcheck With jacketcheck Motor1,8 kW, 380 V With variable speed drivecheck Speed150—2800 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,00 x 0,65 m Total height1,30 m Weight180 kg Extra SpecificationsWith vacuum pump, 0.37 kW, 220 V, 2700 rpm, Stephan temperature meter, and spare parts.Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsFood additivesSolid ...

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Stephan Vacutherm VM/MC 800/20 vacuum processing system with Stephan Microcut MCH20 high-speed cutting and emulsifying unit. The Stephan Vacutherm is a highly versatile vacuum processing and cooking system for the food industry, designed to combine several processing steps in one compact installation. Depending on the product and recipe, the system can be used for mixing, dispersing, fine cutting, emulsifying, homogenising, heating, cooling, deaeration and pasteurisation. The vacuum processing vessel has a nominal batch capacity of approximately 800 litres. The system is particularly suitable for the production of products such as sauces, dressings, mayonnaise, emulsions, spreads, convenience foods, purees and other liquid or semi-liquid food products. It can process both liquid and solid ingredients and is capable of incorporating particles or other ingredients during processing., A maj ...

Mikrosa SASL 5 CNC (Kronos L size), complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul No hydraulic movements Application 5-axis CNC controlled in position with digital brushless motors: - working wheel axis motor with Heidenhain linear encoders - Grinding wheel and regulating wheel both with electrical axis movements - rotating axis with digital brushless motor on regulanting wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to regulate number of RPM Protection and fume extraction hood For through-feed grinding and customization possible according to customer needs. Machine refurbished, therefore possibility of testing in our warehouse, CE certification, manuals, 12 months warranty. The machine is visible working in our warehouse in Gussago BS. Mimu Ma ...

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

more tech. Details on request

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

SHODA-CNC Router (6) main heads-(6) piggy back heads- model NC 516-1326, (2) 51x102 vacuum tables- 15M FANUC Controller, (2) vacuum pumps 7-1/2 hp. each- 1995 very low hours, ……….…………..Price-$15,000 reduced

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

DATA ON THE MACHINE Machine type: Handwheel Manufacturer: MAHO Model: CNC Condition: ready for use (used) Price 400 â?¬ FP net plus VAT Location Warstein , Germany Reference M-MAH-1119-6 Description We offer you a used handwheel from the manufacturer MAHO Nterv suitable for e.g. MAHO MH700 Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010

Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others