cnc spring used for sale

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Working range: 1.5 x 3m, or 2 x 4m Standard equipment: self-focusing cutting head 2kW laser, cooling unit, cleaning and drying air system,safety cabinet, automatic twin transfer table,CAD/CAM software (Lantek, Metalix, Almacam)Control device with 15 touchscreen,foerderband,warning light,duesenset Options: linear drive technology, laser light source optional with 3, 4 or 6 KW removal device, safety light barrier,air conditioning for automation panel. 24 months manufacturer's warranty The price refers to a 1.5 x 3m system with 2 KW; ready for use

Plasma and cutting machine Promotec Ector 30 / 170 Working range: 3000mm x 17000mm 1 x Plasma Ht 2000 Hypertherm cutting up to 25mm 1 x Autogen support up to 100mm machine to visit under power . Without table and filter assembly and commissioning on request; ready for use

Lathe VDF / Boehringer, peak width 1000 mm, control has been converted to Siemens

CO2-Laser, Bystar 4020, 4.4 KW Table size 2000 x 4000 mm, axis incl. interchangeable table, incl. suction, Bj.: 2004 ; ready for immediate use

Sato Satronik C 1500, Y.O.M. 98Control 801Travel distances 2500mm x 1500mmSuction table Kemper 3000mm x 1500mm, Y.O.M. 2012Extraction Kemper 8000, Y.O.M. 2012, but with 0 operating hours, for outdoor installation, with portable control panel, plasma source Hypertherm Powermax 1650,laptop with laptop with Lantek programing softwareAssembly and commissioning on request; ready for immediate use

IFB (integrated flying bridge) Working area: 1200mm x 2000mm (real 1210mm x 1990mm) Table is 1400mm x 2040mm Operating hours: approx. 17.000 h Pump: Model: ESC Allan Lickiss, power 4150 bar The machine can be changed on Abrassiv cutting (other cutting head), all parts are almost unused. The machine was used exclusively for pure water cutting. ; ready to go

Microstep Oxycut A 4501.20 Working range: 4500 x 2000 1 Oxygen support: cutting up to 100mm including Cad/Cam system including suction system plasma operation prepared on request assembly and commissioning on request; ready for immediate use

Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good

Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good

Cell with robot KAWASAKI RS005L A + band saw Year of construction / robot: 2010 Control: CNC 6-axis Max arm range: 903 mm Max load capacity: 5 kg Country of origin: Japan

Esab UXD - P 2500 Control NCE 290 1 x Plasma: Kjellberg PA S 40 cut up to 30mm 1 x Autogen Support Working area: 2500mm x 3500mm Including suction machine has two-sided drive and is very well maintained. commissioning on request ; ready for immediate use

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Inv. Num: 5234 Type: SPRINT 20 linear Producer: DMG GILDEMEISTER Generated: 2006 Parameters: Engine hours: 79172 h Switch-on hours: 50648 h Max turning diameter: 20 mm Maximum length travel in the X-axis: 35 mm Maximum travel Z-axis: 80 mm Maximum feed speed Axis X: 40 m/min Maximum feed speed Axis Z: 40 m/min Number of spindles: 2 pieces Maximum main spindle power: 5.5 kW Minimum main spindle speed: 1 1/min Maximum spindle speed: 10000 rpm Axle X2: 230 mm Axis Z2: 180 mm Maximum length travel in the Y-axis: 240 mm Counterspindle power: 3.7 kW Maximum counter spindle speed: 1 1/min Maximum speed of the driven tools: 1000 rpm Lathe length: 2275 mm Lathe width: 1300 mm Height: 1760 mm Weight: 2.6 t Facilities: Rod loader with magazine Conveyor Liquid cooling Technical documentation Full coverage of the work area

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

Type SX1325B-3 Working area 1300x2500x210 mm Platform size 1480x3100 mm Resolutions ±0.05 mm System resolutions ±0.001 Repeat positioning accuracy 0.03 mm Table structure – vacuum adsorption Shaft drive mode – XY axis rack drive Z axis screw drive Shaft power mode – Panasonic servo motor (Z axis with brake functions) Max. traveling speed 35 000 mm/min Max. working speed 20 000 r/min Spindle power 4.5 kW, 6kW Spindle speed 0-18 000 r/min Run command G code Vacuum pump 7.5 kW Voltage AXC380/3HP/50Hz Weight 2000 kg

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

Water jet system Flow Model IFB2 3618 TC 1P Year of construction: 2005 Condition good (used) operating hours 25000 h IFB2 3618 TC 1P UP 50iS Cooling Working area 3600mm x 1800mm high pressure pump 50iS-60ESL 4150 Bar With abrasive Without program software Available immediately . Installation and commissioning on request

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Water jet system flow model IFB2 3618 TC 1 P Year of construction: 2005 State good (used) hours of operation 25000 h IFB2 3618 TC 1 p UP 50iS cooling working range 3600 mm x 1800 mm High pressure pump 50iS 60ESL 4150 bar with Abrasivbehaelter without any program software Immediately available. Installation and Setup on request

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

turning diameter: 660 mm turning length: 2000 mm control: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

; ready to use

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

Plasma cutting system with Hypertherm HPR 130 with automatic gas console cutting up to 20 mm Work area: 1500 x 3000 mm included filter system available under current mounting and commissioning on request

Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T

Bystar 3015 5.2 KW Hours of operation: 30.100 h (stand 11.04.2017) Cutting hours: 10.760 h (stand 11.04.2017) Year of construction: 2004 Available from: August 2017

Robot KAWASAKI MX 700 Year of construction: 2012 Control: CNC 6-axis Max arm range: 2 839 mm Max load: 700 kg Country of origin: Japan

CNC Horizontal Milling Machine LAGUN Model G Cosmos 20 Manufacturer: LAGUN Model: G Cosmos 20 New in: 2004 Condition: very good, complete Control: Fagor 8055 Table dimensions: 2000 x 700 mm Distance from table to column: 1217 mm T-slots: 5x18x116 mm Max. workpiece weight: 4000 kg X axis travel: 2000 mm Y axis travel: 800 mm Z axis travel: 1000 mm Spindle taper: ISO 50 Spindle speed: 15 000 rpm Rapid traverse rate: 24 mm/min Main motor power: 17 - 20.5 kW Total power required: 27 kW Machine weight: 10 600 kg Dimensions: 5495x3440x3016 mm

CNC Vertical Machining Center DECKEL-MAHO Model: DMC 70V Manufacturer: DECKEL-MAHO Model: DMC 70V New in: 1999 Condition: very good, complete Technical details Table size: 900x550 mm Max. table load: 600 kg X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Spindle speed: 30 000 rpm Spindle taper: HSK 50 Total power requirement: 10/15 kW Dimensions: 3900x3700x3000 mm Machine weight: approx 8000 kg

CNC Vertical Machining Center MORI SEIKI mod. SV-503 Manufacturer: Mori Seiki Model: SV-503 YOM: 2001 Technical details: Table size: 1300x600 X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 660 mm Spindle drive motor: 30 HP Spindle speed: 10000 rpm Tool changer: 30 ATC Spindle taper: 40

CNC plasma cutting system knife Metalmaster working range: 8000mm x 2500mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition immediately available with Donaldson filter system Including Cad/Cam software commissioning on request

under current Details on request

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

CNC plasma cutting system blades Metalmaster Work area: 8000 x 2500 mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition with Donaldson filter system now available Including CAD/CAM software commissioning on request

Knife Cortina plasma and burning cutting unit 1 x PlasmaSupport Hypertherm HD 3070 1 x gas support Working range: 2500 mm x 4000 mm electrified operation on request

Microstep - EuroCut-P 3001.15 Working range: 1500mm x 3000mm plasma source Kjellberg HiFocus 160i with automatic gascosole cutting up to 25mm quality cutting suction Donaldson MD2-PLC + DFPRO 4 SPRK with an additional EX protection. Refurbished in 2016 All maintenance or repairs were carried out exclusively by the manufacturers (MicroStep and Donaldson). The prescribed maintenance intervals have always been adhered to. All maintenance and repairs are extensively documented. commissioning on request

Microstep - EuroCut-P 3001.15 Work area: 1500 x 3000 mm Plasma source of Kjellberg HiFocus 160i with automatic Gaskosole Cut quality cutting up to 25 mm Extraction Donaldson MD2-PLC + DFPRO 4 which with additional EX-protection. Refurbished in 2016 All servicing or repairs were solely by the manufacturer (Company MicroStep and Donaldson). The prescribed maintenance intervals were always met. All maintenance and repairs are extensively documented. Commissioning on request

Laser cutting machine Bystar 3015 Bylaser 4000, 4 kW Laser source incl. shuttle table system, cooling system, compl. Cabinet combination with CNC and laser- Control, protection in the cutting area, 2 Cutting heads, reflection absorber, cross-Jet, extraction system Documentation Laser a 19, 000 h Maintained by Bystronic.

CO2 laser Bystar 3015 4.4 Kw, Table size 1500 x 3000 mm, incl. changetable, without loader, without suction, Y.O.M. 2006 glass revision in November 2015 under power laser: 28,000 h power on demand

CO co² Bystar 3015 4.4 kW, 1500 x 3000 mm, table size incl. removable table, without loader, without extraction, BJ. 2006,. Glass revision in November 2015 Laser: 28.000 h Power: 50,000 hours

Knife Cortina 2600. Year built:1994 Control KS 20A Plasma: Hypertherm Max 100 (cutting up to 30mm) The suction table: 1500mm x 3000mm. With only one burner car instead of 2 or 3, you have a working width of up to 2000mm. The box program on the PC is the OmniWin CAD. Extraction system: Donaldson 5.5 KW to be visited under electricity commissioning on request

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request