140,790 used machines on RESALE, but how to find them? Machine Search
Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible.
CINCINNATI ARROW 2 1000 CNC WITH LOW HOURS WE OFFER AN NICE CONDITION VERTICAL MACHINING CENTRE YEAR 2003 WITH EQUIPMENT CONTROLS: GE-FANUC SERIES 18I-M CONTROL Table: 1,120 x 610mm TRAVELS: X : 1,020mm, Y : 510mm, Z: 560mm. Rapid Traverse : XYZ=24m/min. Maximum Cutting Feed : 15m/min. Maximum Spindle Speed: 8,000rpm. Spindle Taper BT40. 20 Position ATC. MACHINE WILL BE AWAILIBLE FROM BEGINING FEBRUARY 2024
Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.
A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.
Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.
This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information.
CNC router manufactured in 2009. This MECANUMERIC Pro 3015 has been very lightly used, with a total operating time of just 1,369 hours. The machine is in very good mechanical condition, although the spindle bearings will need replacement. It is currently connected to power and can be tested until approximately the end of September 2026. If you are looking to get high-quality routing capabilities, consider the MECANUMERIC Pro 3015 machine we have for sale. Contact us for further details.
CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.
Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg
This 4-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details.
Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.
Control: Cybelec DNC 600S. Inspection by appointment possible.
Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp
Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea
CNC shearing machine manufactured in 2023. This Durma VS 4006 features a cutting length capacity of 4100 mm and can handle a maximum sheet thickness of 6 mm for structural steel. It includes a powerful 11 kW motor and a rear stop/back gauge range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the Durma VS 4006 machine we have for sale. Contact us for further details.
This 4-axis MORBIDELLI A644S FTP 41 PC was manufactured in 2015. It features an impressive X-axis travel of approximately 4,400–4,500 mm and Y-axis travel of approximately 1,350 mm. The machine is equipped with a CNC milling spindle and an automatic tool changer, ensuring efficient processing. If you are looking to get high-quality CNC processing capabilities, consider the MORBIDELLI A644S FTP 41 PC machine we have for sale. Contact us for further details.
Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool
Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine
The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter 280 mm; Max. turning length 550 mm; Swing over bed 570 mm; X / Z travel 241 / 640 mm; Y-axis travel ±50 mm (total 100 mm); X / Z rapid traverse 30 / 30 m/min; Bar capacity 61 mm; Spindle interface A6; Max. spindle speed 4,700 rpm; Spindle power S1 / S6 (40%) 20.9 / 27 kW; Torque S1 / S6 200 / 257 Nm; Turret 12 positions, VDI 40; Driven tools: Yes; Driven tool speed 4,000 rpm; Driven tool power 8 kW; Driven tool torque 40 Nm; Tailstock: Yes, Morse 5; Max. workpiece weight 350 kg at max. 1,000 rpm; Dimensions L × W × H 3,875 × 2,122 × 2,345 mm; Machine weight approx. 7,700 kg.
Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl
Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm counters of axes are damaged ? manufacturer don?t supply spare parts Control:SIEMENS 840 C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Made in Germany
Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm grinding flange included Made in Germany Control:SIEMENS 840C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm
Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm Spindle cooling Made in Germany
Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible.
Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 300 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm Made in Germany
Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm grinding flange included, conture
Manufacturer: HYUNDAI WIA Model No.: L200SY Year: 2014 Condition: Used Stock number: 4923 Control System: FANUC Series 31i Model A Switch-on hours: 11750 h Maximum turning diameter: 550 mm Max. turning length: 530 mm Maximum length of travel in the X-axis: 220 mm Maximum spindle speed: 4000/6000 1/min Max. turning diameter: 240 mm Grinding diameter: 550 mm Spindle diameter: 65 mm Lathe chuck diameter: 210 mm Maximum length of travel in the ZB axis: 720 mm Maximum length of travel in the Y-axis: +-40 mm Number of all tools: 12 pieces Counter spindle power: 3.7/2.2 kW High pressure cooling: 14.5 bar Spindle drive power: 15/11 kW Length: 3045 mm Width: 1707 mm Weight: 4600 kg Height: 2021 mm 2019: Replacement of chuck and tool probe Equipment: 8 Pieces Tool Holders 4x pieces of powered tools Inner Holder Reduction Sleeves
Control:Fanuc 160 i - M axis travel range X 650 mm Y 300 mm Z 300 mm C +150?/-60? taper ISO50 dimension grinding wheel 250mm speed of grinding spindle ? 9000 rpm grinding flange included, machine has spindle cooling, dust extraction. made in Schwi
Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s
This 3-axis FORMAT4 PROFIT H22 was manufactured in 2009. It features a robust work table type with a pod and rail vacuum bed, equipped with 6 moveable support rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking to get high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT H22 machine we have for sale. Contact us for further details.
Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland
A CNC machining center is offered. Control: CNC control with control panel. Equipped with workholding fixture and coolant system. The boards are presumably defective. Inspection possible by prior arrangement.
A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment.
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland
Control: Fanuc Profesional 3 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase
A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement.
A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment.
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
A compact CNC lathe is offered. Control: Siemens. Condition: defective. Turret enable signal is missing. Inspection possible by appointment.
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details.
Control: Fanuc Profesional 5 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par
The machine is in good technical condition and can be tested by prior arrangement. Specifications: 160 mm turning diameter, 285 mm turning length, 40 mm spindle bore, 6000 rpm, 8-position tool turret, hydraulic tailstock, Siemens 840C control system. Includes a laptop with RS-232 connectivity for transferring programs (e.g., from CAM software) to the lathe, as well as the tools currently on the turret, a hydraulic chuck, an extraction system, etc. Unfortunately, the PLC data was lost during a prolonged period of inactivity; however, the Siemens system itself remains intact, so anyone familiar with the system can simply reload the backup and get the machine running again.
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha
maximum number of results exceeded
please refine your search
