127,433 used machines on RESALE, but how to find them? Machine Search
turning length:400 mm total power requirement:45 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,58 x 1,91 x 2,05 m spindle passage:45 mm
turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m
equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control
NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...
CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Equipped with chip conveyor Equipped with 1 Bar Feeder type DH 65 Weight: approx 2,5 T
Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
20-75- CNC with tool changer WOODLAND MACHINERY (new) Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur
CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50
Rotating pallet change system including 3x pallet, pallet size: 500 × 500 mm, 4th axis 1° indexing, maximum workpiece Ø approximately: 730 mm, tool magazine capacity: 60, maximum tool diameter: 150 mm, maximum tool length: 360 mm, maximum tool weight 12 kg. Transformer included: 200 V/ 400 V
20-75- CNC router WOODLAND MACHINERY (new) Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur
Equipped with 1 set of tools, please note the control is defective
Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
3000 x 1500mm LOW HOUR MACHINE with Compact Express / Brush Tables
Specifications: - X-axis: 162mm - Z-axis: 750mm - Y-axis: +/- 50mm - C-axis: yes - B-axis: 670mm - sub spindle speed: 4500rpm - sub spindle motor power: 5,5kW - live tooling: yes - live tooling speed: 3000rpm - live tooling type: BMT-55 Machine is equipped with: - Chip conveyor - Bar feeder - live tooling - y-axis - tooling in turret included - pallet with tooling included
CNC LATHE WITH SUBSPINDLE AND Y-AXIS Inv. No. 13.032C1 Make MAZAK Model SQT250MSY Control T-PLUS Center distance 495 mm Max. swing over bed Ø 525 mm Max. swing over cross slide Ø 350 mm Spindle bore Ø 64 mm R.P.M. 35 – 4,000 (16x) kW 18 Volts 380 Cycles 50 Including: 12 pos. A.T.C.(driven tools) Hydraulic chuck Ø250mm
Key data: 300 mm, 450 mm
Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.
Excluding clamps and tools, including cooling system
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.
Machine is equipped with: - chip conveyor - renishaw probe system
Key data: 100 t, 3440 mm, 3550 mm
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Key data: 44 t, 1300 mm, 1250 mm
Electric Press Brake C12 CoastOne - Made in Finland Pressing force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 4-axis controlled X-R axes Press brake tool holder: Quick clamping system TEDA top AMADA / Promecam / Type A / Type R1 Light in the front work area Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm
Key data: 250 t, 3200 mm, 3200 mm
Electric Press Brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Back gauge: X-R-Z1-Z2 controlled Control: TC15-2D Graphics Control Front support arms, height-adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Other equipment options on request Warranty: 36 months after installation
Milling head is defect and needs to be overhauled!
Key data: 22 t, 900 mm, 850 mm
Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Rotating pallet change system including 3x pallet, pallet size: 500 × 500 mm, 4th axis 1° indexing, maximum workpiece Ø approximately: 730 mm, tool magazine capacity: 60, maximum tool diameter: 150 mm, maximum tool length: 360 mm, maximum tool weight 12 kg. Transformer included: 200 V/ 400 V
Stock number: 3880 PROCESSING Manufacturer: Johnford , Type: VMC 824 Machine NO.: 49208455, Year of manufacture: 1992 Specifications: Table size 1100 x 400 mm Longitudinal movement (X) 900 mm Transverse movement (Y) 500 mm Vertical movement (Z) 570 mm Spindle cone BT 40 Spindle speeds 36-6000 rpm Spindle motor 7.5/5 Kw Tool changer 24 places Control Fanuc OM Fabr. Operating hours spindle 4412 hours Length: 3100 mm, Height: 2850 mm, Width: 2350 mm, Weight: 5000 kg
Rotating pallet change system including 3x pallet, pallet size: 500 × 500 mm, 4th axis 1° indexing, maximum workpiece Ø approximately: 730 mm, tool magazine capacity: 60, maximum tool diameter: 150 mm, maximum tool length: 360 mm, maximum tool weight 12 kg. Transformer included: 200 V/ 400 V
Equipped with new control and laser protection from PILZ; including 1 set of tools with 2 V die sizes
Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,
Key data: 3000 W, 1500 , 3000
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts ...
CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m
Control: Mazatrol Smooth X Hours: 11019 X-axis: 350mm Y-axis: 550mm Z-axis: 510mm A-axis: -120° ~ +30° C-axis: 360° Rapid feedrate: 30m/min Table size: 500mm x 400mm Max. Workpiece weight: 200kg Min. / max. Height under spindle: 50 ~ 560mm Spindle taper: SK-40 Spindle speed: 12.000 Spindle motor power: 11Kw Positions on ATC: 30 Machine is equipped with: - Chip conveyor - Through spindle coolant - Renishaw RMP 40 probe - Digital user manuals
Specifications: Control: Haas NGC Hours: 1892 X-axis: 508mm Y-axis: 406mm Z-axis: 394mm Feedrate XYZ: 61m/min Table size: 660mm x 381mm Max. Table load: 113kg Spindle taper: BT-30 Spindle speed: 15.000rpm Spindle motor power: 29kW Positions on ATC: 20 Machine is equipped with: - chip conveyor - Renishaw / Haas OTS probe - Renishaw OMP 40-2 probe - through spindle coolant - prepared for 4th & 5th axis - extra coolant filter
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.
Machine is equipped with: - chip conveyor - renishaw probe system
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6012 1,5kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 1.5kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of ...
This KRÃSI KM-95 G1 was manufactured in 2007. A CNC Wood Machining Centre, it is ideal for a variety of woodworking applications. Consider the opportunity to buy this KRÃSI KM-95 G1 CNC Wood Machining Centre. Contact us for more information.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...
This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6035 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...
A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
