136,440 used machines on RESALE, but how to find them? Machine Search
The machine is equipped with a tailstock as well as three-jaw chuck, jaw width: 380 mm, furthermore a large batch of tool holders, clamping jaws and another jaw chuck, incl. Chip conveyor. Additional technical specifications: • frequency: 50/60 Hz • nominal voltage: 52 A
CNC Turning and Milling Center DMG CTX GAMMA 2000 TC (spindle hours may increase slightly). The machine is equipped with an automatic steady rest from SMW AUTOBLOK, a three-jaw chuck (manufacturer SMW, diameter: 300 mm), additional clamping jaws, another jaw chuck, as well as a chip conveyor and coolant system. Transport warning: Caution: the machine can be transported on a truck up to 3000 mm wide. Additional technical specifications: • Spindle distance: 2260 mm • max. workpiece weight chuck parts/chuck weight: 250/150 kg • max. workpiece center of gravity from spindle flange: 250 mm • Travel path Z2: 1910 mm • Travel path Z3: 1910 mm • Steady rest clamping range DW: 45 - 310 mm • Steady rest width C: 145 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm
The machine is equipped with a tailstock, a 12-station tool turret as well as a collet chuck, incl. chip conveyor
The machine is equipped with a tailstock, a three-jaw chuck, a chip conveyor, and a coolant system. Attention: spindle hours may increase slightly! Additional technical specifications: • Nominal voltage: 125 A • Spindle distance: 1020 mm • Max. workpiece weight chuck parts/chuck weight: 100 kg • Max. workpiece center of gravity from spindle flange: 120 mm • Travel X1: from -10 to 490 mm • Travel Y1: +-100 mm • Travel Z2: 600 mm • Travel Z3: 800 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm • Slide rapid traverse speed Z-axis: 40 m/min • Path resolution Z-axis: 0,001 mmm • B-axis max. swivel speed: 70 rpm • Angular resolution: 0,001° • Quill force: 8 kN
The machine is equipped with a tailstock, a 12-station tool turret as well as a 3-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, incl. chip conveyor
The machine is equipped with a sub-spindle (equipped with a 3-jaw chuck SMW AUTOBLOK, diameter: 210 mm) as well as a 12-station tool turret, incl. driven tool stations, as well as an SMW AUTOBLOK 3-jaw chuck, diameter: 250 mm, plus chip conveyor, filter extraction, documentation and CDs. Additional technical specifications: • Bed inclination: 45° • Bed diameter: 700 mm • max. slide diameter V1 to V3: 500 mm • in the front workpiece diameter: 320 mm • centre length: 1450 mm • Travel Z3-axis: 1200 mm • Spindle height axis to floor: 1043 mm • Drawbar diameter: 81 mm • Front bearing diameter: 130 mm • Resolution axis C1: 0.001° • max. weight between centers: 500 kg • Distance between two spindle noses: 1495 mm • Z1 axis travel: 1200 mm • max. workpiece length: 1140 mm • max. workpiece diameter: 450 mm • Bar capacity of sub-spindle: 50 mm • Bore diameter o ...
The machine is equipped with a tailstock, revolving steady rest, a 14-position tool turret, incl. the tool holders visible in the photos in the turret, as well as a three-jaw chuck from the manufacturer SMW, diameter: 315 mm and incl. an additional steady rest as well as chip conveyor Additional technical specifications: • nominal current: 207 A • control voltage: 220 V
The machine is equipped with a tailstock and a 12-station tool turret, incl. the tool holders located in the changer, plus a 3-jaw chuck SMW AUTOBLOK, diameter: 300 mm, incl. chip conveyor and filter extraction system as well as documentation. Additional technical specifications: • frequency: 50/60 Hz • Diameter in the front bearing: 140 mm • Feed drive in X and Z-axis: 40 x 10 mm • Feed forces X/Z: 7.5 kN • Y-axis feed force: 7000 N • rapid traverse of C1-axis: 100 m/min • Position measuring system X/Y/Z: absolute rotating • Positioning uncertainty X: 0.008 mm • Positioning uncertainty Z: 0.010 mm • Working area axis distance: 1150 mm • Swivel range over X slide: 465 mm • Swivel range over bed: max. 680 mm
• nominal voltage: 80 A • spindle internal diameter: 85 mm • incl. chip conveyor
HARDINGE COBRA 42 ist eine CNC Drehmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Kapazitäten: Dreh-Ø über Bett 210 mm, Stangen-Ø 42 mm, Drehlänge/Z 355,6 mm, X 196,8 mm; Revolver 1×12, Camlock A2-5. Daten: 100–5000 t/min; Eilgang X=10 Z=16 m/min; Spindel 14 kW; 50 Hz 3×400 V; 24 kVA. Zubehör: 3-Backenfutter, Spannzangensatz, Stahlhalter. Für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhren, Maschinenbau. Technische Daten ohne Gewähr
x-travel: 2000 mm y-travel: 1250 mm z-travel: 1108 mm turning speeds: 60 - 4000 U/min spindle motor: 38 / 24 kW tool taper: SK 50 tool change unit: 40 Pos. table surface area: 1600 x 1250 mm table load: 7 t c-axis: +/- 120 ° B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,5 x 4 x 2,9 m 5-axis machining center with - CNC control Heidenhain iTNC 530 - NC rotary table with B-axis - Automatic swivel milling head (C-Axis) - 40-fold tool changer (SK 50) - Electronic handwheel - 2 Chip conveyor - Coolant device 30 l/min - Coolant through Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: gebraucht : 2015 : 080242 : prompt, Zwischenverkauf v : Türkei : 38900 € : 175 to : 3050 mm : 4 : 265 mm : 2600 mm : 410 mm : hydraulisch : 120 mm/s : 10 mm/s : 100 mm/s : 18.5 kW : 4250 mm : 1850 mm : 2770 mm : 10520 kg 4 axes (Y1, Y2, X, and R-axis) Cybelec DNC 880 S CNC control - 2D graphic display - User-friendly conversational programming - Automatic bending sequence calculation - Automatic calculation of developed length for blank cutting - Product and tool memory - Correction capability - USB ports for backup and program storage CNC-controlled backgauge on linear guide and ball screws Backgauge finger blocks on linear guide CNC-controlled crowning New upper tool 1010/A/75°/0.8/105, sectional and gooseneck New lower tool 2009/85° (V = 16, 22, 35, and 50 mm), sectional Fiessler AKAS laser safety device mounted on the upper beam 2 sheet support arms on linear guides Foot pedal ...
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
With Supply-station infeed. Video of full-working condition available. Dismantled for transport. Auction-ID: A1-40982-139
Year: 2018 Control System: Delem DA-66T Number of Axes: 6 (Y1 + Y2 + X + R + Z1 + Z2) Operating Hours: 2,442 h Power: 15.8 kW Press Force: 120 tons Maximum Working Width: 3,100 mm Column Gap: 2,550 mm Backgauge Depth: 750 mm Max Stroke: 260 mm Crowning System: CNC-controlled Punch Holder: Standard (European-style) Tools Included: Yes Options: Finger safety guard Documentation: Available CE Certificate: Yes Video available Auction-ID: A1-40982-6
x-travel: 1250 mm y-travel: 500 mm z-travel: 500 mm Control: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 900 mm turning length: 1600 mm control: Fanuc 21iTB swing dia.: 1030 mm swing diameter over cross slide guide: 800 mm x-travel: 470 mm z-axis: 1650 mm spindle motor: 37/45 kW spindle turning speed range: 0 - 1800 U/min transmission ratio: 3 max. torque on the spindle: 5423 Nm Turret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm chucking diameter: 530 mm total power requirement: 68,6 kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,8 x 2,8 x 2,6 m - CNC Control Fanuc 21i-TB - LNS - C-axis 360° (0,001°) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 150 mm y-travel: +/- 30 mm z-travel: 620 mm chucking diameter: 165 mm Main Spindle:: spindle speed:: 6000 U/min spindle motor: 11 / 7,5 kW 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW Turret: 3x 15 Stck c-axis: 0,0001 ° y-axis: +/- 25 mm Control: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/min total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4120×2130×2815 m Horizontal lathe with main and counter spindles - Muratec Fanuc 32i-TB CNC control - Main and counter spindles -- 2x C-axis - Tool turret (3x) with Y-axis, -- 15 stations each (BMT 44) -- Powered tools on all stations, 8 kW, 6,000 rpm - Finished part gripper - Conveyor belt - Bar feeder interface - Coolant system, separate 200-litre tank - Cooling unit - High pressure to turrets 1–3 via M-function: 15 bar/40 l/min - Chip conveyor - T ...
turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...
Turning diameter: 920 mm Turning length: 6000 mm Control: Mazatrol Matrix Spindle bore diameter: 170 mm Spindle nose: A2-11 spindle motor: 45/37 kW spindle turning speed range: 35 - 1600 U/min Spindle nose sub spindle: Turning speed sub spindle: 35 - 1600 U/min Movement X-axis: 1025 mm Movement Y-axis: 650 mm Movement Z-axis: 6170 mm w-axis: 4816 mm B-Axis travel: +210 / -30 ° C-Axis indexing: 0,0001 ° Tool Taper: BT 50 Tools in tool magazine: 80 Milling head speed: 10000 1/min milling drive: 37 kW total power requirement: 120 kVA dimensions of the machine ca.: 13267 x 3,300 x 3,200 mm Total weight, approx.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mm y-travel: 2500 mm z-travel: 1000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2300 mm rapid travel x/y/z: 15/12.000 mm/min feeds: 5.000 mm/min tool taper: ISO 50 number of spindle speeds: 5000 U/min/rpm Spindle power: 30 kW table weight: 10 t handwheel: HR- 410 weight of the machine ca.: 31 t dimensions of the machine ca.: 11 x 3,44 x 4,9 m - CNC control Heidenhain iTNC 530 - Tool changer 30-fold (ISO 50) - Milling head CH -45 - Coolant through spindle - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control
Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle
CNC lathe Okuma LB 3000 EX II-MY C 450 Control: OSP-300LA Year of manufacture: 2018 Internal machine no. 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm X-axis travel: 260 mm Y-axis travel: 120 mm Travel Z-axis: 510 mm Travel C-axis: 360 mm Max. turning diameter: 340 mm Max turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: - Chip conveyors - One touch IGF - Touchsetter - Main spindle Kitagawa B210 - Coolant system
Manufacturer: Buffalo Model: MICROCUT SAB LT-52 Year: 2019 Condition: Used Stock number: 6719 Control system: Siemens Maximum turning length: 460 mm Maximum turning diameter: 210 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 5000 1/min Maximum turning diameter over support: 220 mm Maximum length of travel in the X-axis: 215 mm Maximum feed in the Z-axis: 520 mm Length: 3330 mm Width: 1821 mm Height: 1930 mm Weight: 3200 kg Equipment: Chuck Chip conveyor Lace
Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit
Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor
Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software
Gantry-type, 3-axis CNC machining centre Working area (type 2132): approx. 3300 x 2100 mm Vacuum table with multiple switchable zones Input: AES lifting table for automatic sheet loading Output: conveyor belt with label printer (labels are printed and applied manually) Main spindle: HSD ES929, HSK-F63 mount, 7.5 kW (9 kW), speed up to 24,000 rpm, 800 Hz, 380 V Main spindle overhauled in 2023 Drilling unit with 16 spindles: 6 vertical spindles in X, 4 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Tool changer with 12 positions Vacuum: Becker vacuum pumps, system approx. 500 m?/h Control: OSAI control system with AES ProcessController, operation via console with touchscreen and keyboard Operating hours: approx. 2,100 h (machine life), main spindle overhauled at approx. 1,360 h
4-axis machining center working area: X Y Z : 3060 x 1080 x 155 mm Movement speed X 100 m/min, Y 100 m/min, Z 30 m/min 14 vertical spindles 4 horizontal spindles in X direction 2 horizontal spindles in Y direction Grooving saw 0? - 90? toolchanger 7 positions toolchanger 10 positions Router 7,5 kW, ISO 30 , 1000 - 24000 r/min, c-axis lock milling aggregate available in option
X-axis: 500mm, Y-axis: 380mm, Z-axis: 380mm, B-axis: 180°, C-axis: 360°, max. spindle speed: 15,000rpm, feed and rapid traverse: 30m/min, tool changer: 24-position, tool holder: SK40, control: Deckel Maho MillPlus, spindle operating hours: 7,000h, the original screen is defective, therefore a separate monitor is used, replacement spindle has 7,000h, spindle module and E/R module replaced in 2023, C-axis table bearing repaired in 2023, Z-axis guideways repaired in 2024, hard drive replaced in 2024, without clamping systems or tools, an on-site inspection is possible.
X-axis: 750mm, Y-axis: 600mm, Z-axis: 520mm, B-axis: 180°, C-axis: 360°, max. table load: 350kg, tool changer: 32-position, max. spindle speed: 18,000rpm, rapid traverse: 50m/min, max. feed rate: 20,000mm/min, tool holder: SK40, control: Heidenhain Mill Plus iT, spindle operating hours: 6,000h, with through-spindle coolant, chip conveyor, replacement spindle has 6,000h, X- and Y-axis guideways repaired in 2024, X-axis measuring system replaced in 2025, rotary union replaced in 2025, both chain changer motors replaced in 2025, an on-site inspection is possible.
X-axis: 2000mm, Y-axis: 1200mm, Z-axis: 1500mm, table surface: 2200x1200mm, number and width of T-slots: 7x22mm, distance between T-slots: 140mm, max. workpiece weight on table: 7.2t, working feed rate: 0-12,000mm/min, rapid traverse: 15m/min, acceleration: 1.5m/s², hydraulic unit power: 5.5kW, pump flow rate: 25l/min, working pressure: 110bar, tank capacity: 180l, cooling unit capacity: 6,100W, compressor power: 2.61kW, length: 5820mm, width: 6723mm, height: 3602mm, weight: 17t, spindle operating hours: 5,000h, with documentation, an on-site inspection is possible.
turning diameter: 500 mm swing dia.: 800 mm turning diameter over bed: 450 mm turning length: 800 mm x-travel: 360 mm z-travel: 980 mm spindle turning speed range: 3200 U/min max. torque on the spindle: 235/939 Nm spindle bore: 110 mm turret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD control system, running time: 5,876 hours.
The machine is in good technical condition; it can be tested by prior arrangement.
Can't refer to press brake. Since X and R axis are stuck. Auction-ID: A1-40982-135
Incl. filter Interlit SK200-760 Incl. automatic tool holder Incl. documentation Incl. video available Auction-ID: A1-40982-14
Turning diameter max. 390 mm Turning length max. 572 mm Control MSD 501 Circumferential diameter over bed 700 mm Circumferential diameter over face slide 560 mm Distance between tips 725 mm Standard turning diameter 248 mm max. turning diameter 1: 390 / 2: 260 mm Main spindle: Speed range - main spindle 35 - 3,500 min/-1 Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A2-8 Spindle bearing diameter 130 mm Spindle bore 86 mm Usable rod diameter 62 mm Travels: x-axis 1: 238 / 2: 173 mm z-axis 1: 650 / 2: 650 mm Tool turret: Number of turrets 2 Number of tool positions 10 + 8 pos. Number of driven tool stations - pos. Switching time 0.3 sec Shaft diameter 25 mm Shank diameter of the drills max. 50 mm Tailstock: Tailstock travel 500 mm Quill diameter 110 mm Tailstock mount MK 5 Quill stroke 150 mm Feeds: Rapid traverse X1/2: 18 m/min Rapid traverse Z1/2: 24 m/min Fee ...
Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of Make: 2000 Condition: Use, Energized, Control on Windows 7 NEW x-travel 600 mm y-travel 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm Tool changing device 18-fold Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röder's Job Manager (for processing several workpieces one after the other) Probing programs for almost all common geometries Extor Extraction System for Dusty Machining Minimal lubrication Bedtrack blower Blum measuring laser (for tool measurement length + diameter + contour and fracture control) Tool cleaning (air) Cooling unit for spindle and control cabinets Documentation Without accessories such as tools or vises Auction-ID: A7-5 ...
Accessories for Leadwell LTC-50CL CNC Lathe Shelf content, without shelf Auction-ID: A7-50270-6
maximum number of results exceeded
please refine your search
3.900 € 
