cnc rotary table used for sale

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...

- Consisting of approximately: - 18 x complete sets with ISO 30 tool holder, collet and cutting tool. - 2 x ISO 30 tool holder with collet. - 8 x tweezers. - 14 x cutting tools. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-13

- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27

- Total installed power approx. 22 KW. - Usable working area approx. 4000 x 1400 mm. - Maximum travel speed in x-y-z directions: 100-100-25 m/min. - Axis C. - Tool magazine with 6 positions. - Electrospindle: power 11 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder. - Adjustable saw group. - Vertical holes in the x-axis direction: 10. - Vertical holes in the y-axis direction: 8. - Horizontal holes in the x-axis direction: 2 + 2. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 benches with 8 suction cups in total. - Vacuum pump NASH_ELMO 2BL2141-2AH50-4A-Z with a capacity of 100 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-26

- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23

- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-18

- Total installed power approx. 15 KW. - Usable working area approx. 2900 x 1000 mm. - Passage height on panel 180 mm. - X-axis travel: 3300 mm, y-axis travel: 1280 mm, z-axis travel: 200 mm. - Maximum travel speed in x-y-z directions: 67-67-22 m/min. - Electrospindle with manual tool change. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 5. - Vertical holes in the y-axis direction: 6. - Horizontal holes in the x-axis direction: 1 + 1 (HEAD IS MISSING). - Horizontal holes in the y-axis direction: 1 + 1. - ESA KVARA 6 numerical control. - Remote control panel. - 6 benches with 14 suction cups in total. - BECKER vacuum pump. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-14

- Total installed power approx. 60 KW. - Dimensions of the aluminium work table approx. 6700 x 1570 mm. - Z-axis travel 340 mm. - Tool magazine with 12 positions. - Electrospindle: power 7.50 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 5. - Automatic lubrication. - Numerical control NUM. - Remote control panel. - BECKER VTLF 250 vacuum pump with a capacity of 248 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-1

CNC lathe Okuma LU 45 M -3000 Control: OSP-P200L Year of Make: 2009 Internal machine no. 81 max. turning diameter 660 mm max. turning length 3,000 mm Spindle bore Ø 260 mm Spindle speed 2,800 rpm m Travels: X-axis 420 mm Z-axis 3,025 mm Spindle power: 30 kW Accessories - Chip conveyors - Tool turret with 12 places - Tools

turning diameter - 12 mm, turning length - 135 mm, approximate dimensions - 1500 mm x 770 mm x 1540 mm, machine equipped with bar feeder, machine dimensions - 2400x1200x2400, bar feeder dimensions - 4800x500x1500, Auction-ID: A1-50601-5

table: 1270 x 510 mm, traverses: 1000 x 510 x 520 mm, spindle speed: 25 - 4000 rpm, spindle motor power: 11/7.5 kW, tool magazine: ATC20, Auction-ID: A1-50601-9

table size: 550 mm, axis travel: X: 800 mm, Y: 800 mm, Z: 700 mm, A: 360 degrees, taper: BT50, maximum spindle speed: 10,000 rpm, tool magazine: 60 cups, maximum workpiece weight: 800 kg Auction-ID: A1-50601-11

Böhringer DUS 560 with additional digital display with Siemens 805 control with Forkardt 3 jaw chuck D 250 mm Multifix Holder Auction-ID: A7-50850-3

Fanuc 18-M, 4 axis, travel in axes: X -1018mm, Y - 560mm, Z - 520mm, spindle speed - 14,000 rpm, full axis 4, magazine - 30 items Other machines, devices and tools unrelated to the subject of sale visible in the photos are not part of the offer. Auction-ID: A1-50601-12

Fanuc 18i-TB control, 5 axes (X, Z, Z2, C main spindle, C counter spindle), max workpiece diameter X600, max turning diameter X330, max turning length 500, max length Z2 axis 500, 12-position tool head, 12-position driven tools, 10” main holder C axis, 6” counter spindle C axis Other machines, devices and tools unrelated to the subject of sale visible in the photos are not part of the offer. Auction-ID: A1-50601-6

NC rotary table – ᴓ 630 mm, rotation – 360ᵒ x 0.001°, machining along the axes: X – 900 mm, Y – 630 mm, Z – 500 mm, table load – 500 kg, automatic spindle switching between horizontal and vertical positions, SK 40 taper, spindle speed – 20 – 6300 rpm, power – 15 kW, 4-speed gearbox, tool magazine – 40 positions, tool diameter – 80/140 mm, length – 200 mm, weight – 15 kg, coolant system with filtration, chip conveyor, machine dimensions – 2500 x 3900 x 2800 mm Auction-ID: A1-50601-8

maximum diameter of the machined wheel: 320 mm, maximum module of the machined wheel: 6, maximum tooth length of the machined wheel: 220 mm, clamping spindle diameter: 250 mm, maximum diameter of the installed screws: 160 mm, maximum vertical travel of the chamfering clamp: 250 mm, CNC control: Siemens Simatic touch Auction-ID: A1-50601-41

new controler from 2021, turning length - 1100mm, turning diameter over the bed - 400mm turning diameter over slide - 225mm, lift of the claws over the bed guide - 260mm, bed width - 320mm, support length - 520mm Offer not include other machines and parts which are visible on the photos but not belong to the machine. Auction-ID: A1-50601-17

Lehmann two-axis CNC rotary table (4th and 5th simultaneous axis) D 200 On pallet 1200 x 800x 500 mm transport dimensions Auction-ID: A7-50850-11

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking Kurzvideo: https://www.youtube.com/watch?v=OHlzAkbGW_U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 533 mm turning length: 660 mm control: Haas total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Haas C-axis driven tools 12-fold revolver hydraulic 3-jaw chuck Tool Eye chip conveyor coolant device without tailstock Technische Daten / technical details: max. Drehlänge / max. turning lenght 660 mm max. Drehdurchmesser / max. turning diameter 533 mm Umlaufdurchmesser über Bett / rotary diameter over bed 806 mm Drehzahl Spindel / spindle speed 3400 UpM /rpm Anzahl Revolverwerkzeugplätze / number of places in revolver 12 fach /fold Eilgang Z, X / rapid feed Z, X 24 m/min Antriebsleistung Spindel / drive capacity spindle 22,4 kW Gewicht der Maschine ca. / weight ca. 4100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machi ...

Control: Haas X-axis: 1016mm Y-axis: 508mm Z-axis: 635mm Table size: 1219mm x 457mm Max. workpiece weight: 1588kg Spindelsnelheid: 7500rpm Spindle taper: BT-40 Spindel motor power: 15 kW Positions on toolchanger: 20 Machine dimensions: Length: 3200mm Width: 2450mm Height: 2650 mm Weight: 5670kg Machine is equipped with: - chip conveyor - programmable coolant nozzle - tooling as showed in pictures Auction-ID: A1-50690-17

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-6

Machine is equipped with: - 380mm chuck - tailstock - 3 toolholders Auction-ID: A1-50690-21

Specifications: Control: Mazatrol Smart Max. Turning length: 540mm Max. Turning diameter: 350mm X-axis: 560mm Z-axis: 190mm Chuck: Hainbuch collet chuck Spindle speed: 5000 rpm Spindle power: 26kW Bar capacity: 65mm Positions on turret: 12 Machine is equipped with: - chip conveyor - collet chuck - Tool pre-setter - Probe system - tooling in turret as showed in pictures Auction-ID: A1-50690-19

Main Spindle: - spindle rpm: 4000rpm - spindle motor power: 18,5kW - C-axis: 0,001° Sub spindle: - spindle speed: 6000rpm - spindle motor power: 10kW - C-axis: 0,001° Turret: - 12 positions - live tooling (4500rpm, 5,5kW) - tooling in turret not included! Machine us equipped with: - chip conveyor - bar feeder - live tooling - sub spindle - Y-axis (-51mm ~ +51mm) - part catcher - tool setter Auction-ID: A1-50690-24

Machine is equipped with: - chip conveyor - tailstock - 225mm SMW AUTOBLOK chuck - tooling as showed in pictures Auction-ID: A1-50690-13

Auction-ID: A1-50718-40

Auction-ID: A1-50690-16

Auction-ID: A1-50690-22

Machine is equipped with: - chip conveyor - tailstock - foot pedals - tooling as showed in pictures Auction-ID: A1-50690-15

CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-50718-59

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-7

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Auction-ID: A1-50690-11

Program run 5700 h, spindle hours 4800 h, spindle holder ISO 40, internal coolant supply, Heaxgon touch probe, without NC clamp Auction-ID: A1-50626-15

LVD PPEB 220 Hydraulic Brake Type: Industrial Hydraulic Press Brake Brand: LVD Model/series: PPEB Bending force: 220 tons Control: Numerical / Electronic Control Actuation: Hydraulic Use: bending and forming of sheet metal and metal parts Marking: CE Manufacture: LVD Company N.V., Belgium Please note that the tools are not included in the sale Auction-ID: A3-46137-35248

Machine is equipped with: - live tooling - C-axis - chip conveyor - tailstock - tool setter - tooling in turret as showed in picture Auction-ID: A1-50690-12

CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg Auction-ID: A1-50718-55

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Mistfilter not included! Auction-ID: A1-50690-9

Auction-ID: A1-50690-8

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-50718-6

Machine is equipped with: - chip conveyor - tailstock - 254mm chuck Auction-ID: A1-50690-14

Machine is equipped with: - chip conveyor - tailstock - 4 jaw chuck Auction-ID: A1-50690-4

CNC – Transl. Machining Centre Inv. No. 10.653MM Make UNISIGN Model Univers 4 Control Siemens Sinumerik 810D Travel X (Longitidinal) 1,600 mm Y (Cross) 400 mm Z (Spindle Height) 400 mm Taper ISO 40 Table 700 x 400 mm Load 600 kg Distance Spindle Nose to Table 150-550 mm R.P.M. 9.000 Main spindle kW 14 Rapid Traverse X,Y,Z 5-28,000 mm/min. Feed rate X,Y,Z 28,000 mm/min. A.T.C. 44 pos. Auction-ID: A1-50718-20

Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10

CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA  ...

Machine is equipped with: - tailstock Auction-ID: A1-50690-23