135,080 used machines on RESALE, but how to find them? Machine Search
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
x-travel: 1250 mm y-travel: 500 mm z-travel: 500 mm Control: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 900 mm turning length: 1600 mm control: Fanuc 21iTB swing dia.: 1030 mm swing diameter over cross slide guide: 800 mm x-travel: 470 mm z-axis: 1650 mm spindle motor: 37/45 kW spindle turning speed range: 0 - 1800 U/min transmission ratio: 3 max. torque on the spindle: 5423 Nm Turret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm chucking diameter: 530 mm total power requirement: 68,6 kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,8 x 2,8 x 2,6 m - CNC Control Fanuc 21i-TB - LNS - C-axis 360° (0,001°) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 150 mm y-travel: +/- 30 mm z-travel: 620 mm chucking diameter: 165 mm Main Spindle:: spindle speed:: 6000 U/min spindle motor: 11 / 7,5 kW 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW Turret: 3x 15 Stck c-axis: 0,0001 ° y-axis: +/- 25 mm Control: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/min total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4120×2130×2815 m Horizontal lathe with main and counter spindles - Muratec Fanuc 32i-TB CNC control - Main and counter spindles -- 2x C-axis - Tool turret (3x) with Y-axis, -- 15 stations each (BMT 44) -- Powered tools on all stations, 8 kW, 6,000 rpm - Finished part gripper - Conveyor belt - Bar feeder interface - Coolant system, separate 200-litre tank - Cooling unit - High pressure to turrets 1–3 via M-function: 15 bar/40 l/min - Chip conveyor - T ...
turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...
Turning diameter: 920 mm Turning length: 6000 mm Control: Mazatrol Matrix Spindle bore diameter: 170 mm Spindle nose: A2-11 spindle motor: 45/37 kW spindle turning speed range: 35 - 1600 U/min Spindle nose sub spindle: Turning speed sub spindle: 35 - 1600 U/min Movement X-axis: 1025 mm Movement Y-axis: 650 mm Movement Z-axis: 6170 mm w-axis: 4816 mm B-Axis travel: +210 / -30 ° C-Axis indexing: 0,0001 ° Tool Taper: BT 50 Tools in tool magazine: 80 Milling head speed: 10000 1/min milling drive: 37 kW total power requirement: 120 kVA dimensions of the machine ca.: 13267 x 3,300 x 3,200 mm Total weight, approx.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mm y-travel: 2500 mm z-travel: 1000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2300 mm rapid travel x/y/z: 15/12.000 mm/min feeds: 5.000 mm/min tool taper: ISO 50 number of spindle speeds: 5000 U/min/rpm Spindle power: 30 kW table weight: 10 t handwheel: HR- 410 weight of the machine ca.: 31 t dimensions of the machine ca.: 11 x 3,44 x 4,9 m - CNC control Heidenhain iTNC 530 - Tool changer 30-fold (ISO 50) - Milling head CH -45 - Coolant through spindle - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe Okuma LB 3000 EX II-MY C 450 Control: OSP-300LA Year of manufacture: 2018 Internal machine no. 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm X-axis travel: 260 mm Y-axis travel: 120 mm Travel Z-axis: 510 mm Travel C-axis: 360 mm Max. turning diameter: 340 mm Max turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: - Chip conveyors - One touch IGF - Touchsetter - Main spindle Kitagawa B210 - Coolant system
Manufacturer: Buffalo Model: MICROCUT SAB LT-52 Year: 2019 Condition: Used Stock number: 6719 Control system: Siemens Maximum turning length: 460 mm Maximum turning diameter: 210 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 5000 1/min Maximum turning diameter over support: 220 mm Maximum length of travel in the X-axis: 215 mm Maximum feed in the Z-axis: 520 mm Length: 3330 mm Width: 1821 mm Height: 1930 mm Weight: 3200 kg Equipment: Chuck Chip conveyor Lace
turning diameter: 500 mm swing dia.: 800 mm turning diameter over bed: 450 mm turning length: 800 mm x-travel: 360 mm z-travel: 980 mm spindle turning speed range: 3200 U/min max. torque on the spindle: 235/939 Nm spindle bore: 110 mm turret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD control system, running time: 5,876 hours.
The machine is in good technical condition; it can be tested by prior arrangement.
turning diameter: 400 mm turning length: 549 mm control: HEIDENHAIN Eltropilot swing over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm main spindle speed: 25 - 5000 U/min main spindle drive: 21 kW max. torque on the spindle: max. 240 Nm : 120 mm c-axis, speed: 100 U/min C-axis: Haltemoment 200 Nm C-axis resolution: < 0,04 ° sub spindle bore: 56 mm sub spindle speed: 25 - 5000 U/min sub spindle drive: 9 kW max. torque on the spindle: max. 72 Nm : 90 mm c-axis, speed: 100 U/min C-axis: Haltemoment 150 Nm C-axis resolution: < 0,04 ° feed power X/Z axis: 3,5 / 7 Nm rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret: 1 x 12 Stationen number of driven tool stations: 12 speed of driven tools: 4.000 U/min total power requirement: 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub ...
: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...
turning diameter: 3200 mm faceplate diameter: 2800 mm turning height: 1600 mm Control: Siemens 840 dsl workpiece weight: max. 16.000 kg Dimensions (L/W/H): 5.500 x 6.450 x 4.900 mm weight - pallet system: 43.000 kg Max. turning diameter: 3,200 mm Table diameter: 2,800 mm Max. turning height: 1,600 mm Max. workpiece weight: 16,000 kg Table speed: 70 rpm Number of table speed ranges: Constant Vertical travel, Z-axis (ram stroke): 1,100 mm Horizontal travel, X-axis: 1,720 mm Working feed range: 2–2,000 mm/min Rapid traverse X/Z: 7 m/min Cross rail travel speed: 360 mm/min Main motor power: 55 kW Total installed power: 69 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 50 t
Manufacturer: AMADA Model No.: HFT 50-20 Year: 2006 Condition: Used Stock number: 9544 Compressive force: 50 t Maximum bending length: 2085 mm Maximum distance between columns: 2665 mm Axis: 4 Throat depth: 420 mm Maximum ram stroke: 200 mm Machine weight: 4850 kg
used
We are pleased to offer the following CNC turning center: DOOSAN PUMA 400LMB Year: 2011 Serial No.: ML0136-004494 Specifications: 15” chuck Spindle bore: 132 mm / 5.197” Through drawbar: 116 mm / 4.56” Maximum work length: 2,028 mm / 80” Approximately 13,000 cutting hours Long-bed configuration Machine reported to be in very good condition
Key data: 100 t, 2500 mm, 2050 mm
Hydraulic press brake HACO ERM 25100 Year of Make: 2005 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Type A tool holder Back gauge: Controlled X-R-Z1-Z2 axles New control system 2026! Immediately available! To be viewed under power!
Discharge m 420mm, distance between frame: 2700mm, equipped with Fiesslet AKAS Iii 150 S/HS protection. Includes 1 tool drawer cabinet and various segment bending knives; Auction-ID: A1-49889-17
It is a new CNC replacement control for Tornos Bechler type TBS 364 sliding head automatic lathes. Auction-ID: A1-50529-515
\" General Description CNC turret punch press manufactured by AMADA , model Aries 222 . Designed for CNC-controlled punching and nibbling of sheet metal using interchangeable turret tooling. Supplied with a substantial additional assortment of punches, dies and tool holders. Technical Details Manufacturer: AMADA Model: Aries 222 Machine type: CNC turret punch press Year: 1990 (March) Serial number: 22250177 Punching force: 200 kN / approx. 20 t CNC control: AMADAN 03P Turret: 10 stations Working area: Approx. 600 × 600 mm Working area with repositioning: Up to approx. 600 × 1,200 mm Maximum mild-steel thickness: Approx. 4–4.5 mm Nominal power: 9 kVA Machine weight: 4,100 kg Included Equipment Large assortment of punch tooling Punches and dies Spring-loaded tool holders / assemblies Round, square, rectangular, slot and various profile tooling Tool storage rack ...
It is a new CNC replacement control for Tornos Bechler type TBS 364 sliding head automatic lathes. Auction-ID: A1-50529-516
Tool holder: BT-40, equipped with carousel tool change magazine (30 places), including 2 vises, 1x 3-D probe and tool holders Auction-ID: A1-49889-23
maximum stroke: 350mm, extension: 450mm, between frame: 3240mm, equipped with Fiesslet AKAS Iii 150 S/HS protection; with 2 pallets of various chamfering tools. Auction-ID: A1-49889-12
\" General Description CNC wire electrical discharge machine (Wire EDM) manufactured by Mitsubishi Electric , model FA20SM . Designed for high-precision cutting of electrically conductive materials using a continuously fed wire electrode submerged in dielectric fluid. Suitable for toolmaking, die manufacturing and precision component production. Technical Details Manufacturer: Mitsubishi Electric Corporation Model: FA20SM Machine type: CNC Wire EDM machine Serial number: 56FS2084 Year: 2006 (November) Power supply: AC 200/220 V, 3-phase, 50/60 Hz, 50 A Compressed air requirement: 0.5 MPa, 75 L/min Dielectric work tank Automatic wire feed system Filtration and circulation system Electrical control cabinet Machine weight: 3,500 kg Condition Good to very good used industrial condition. The machine appears complete, installed and connected, with the control powered on and ...
General Description CNC laser-punch combination machine manufactured by AMADA , model EML 3610 NT . Combines high-speed CNC turret punching with 4 kW CO₂ laser cutting in a single production system. Equipped with automatic sheet loading and unloading for efficient, largely unattended sheet-metal processing. Technical Details Manufacturer: AMADA Model: EML 3610 NT Machine type: CNC laser-punch combination machine Year: 2006 Serial number: 43610024 Laser: 4.0 kW CO₂ Punching force: 300 kN (30 t) Working area: Approx. 3,050 × 1,525 mm Z-turret with 45 tool stations 4 auto-index stations AMADA / FANUC CNC control Automatic sheet loading and unloading system MP300 material handling system Donaldson Torit DCE extraction / dust collection system Turbo blower replaced approx. 400 operating hours ago Vacuum pump replaced approx. 600 operating hours ago Dimensions Machi ...
General Description Handheld fibre laser welding system manufactured by Bodor / Jinan Bodor CNC Machine Co., Ltd. , model BodorWelder 1500 Pro . Compact 1.5 kW laser welding system designed for manual precision welding of sheet metal and fabricated components. Supplied with a Bodor BF600 automatic wire feeder. Technical Details Manufacturer: Jinan Bodor CNC Machine Co., Ltd. Model: BodorWelder 1500 Pro Machine type: Handheld fibre laser welding machine Laser output: 1,500 W Integrated self-cooling system Handheld Bodor laser welding gun Touchscreen operator control Automatic wire feeder: Bodor BF600 Wire feed speed: 15–600 cm/min Wire feeder supply: 100–240 VAC, 50/60 Hz Wire feeder power: Max. 85 W Standard feeding-wheel sizes: Ø0.8/1.0 mm and Ø1.2/1.6 mm Maximum wire spool weight: 20 kg Suitable for stainless steel, carbon steel and aluminium Gas connection Et ...
Extension: 420mm, distance between frame: 3760mm, equipped with Fiesslet AKAS Iii 150 S/HS protection Auction-ID: A1-49889-15
Technical details Configuration: 5-spindle machine Spindle layout: - Bottom spindle (jointing) - Right spindle - Left spindle - Top spindle - Bottom spindle Working capacity: - Working width: 20–230 mm - Working height: 10–160 mm Feed system: - Feed speed: 5–40 m/min - Feed motor power: 5 kW - Electronic infinitely variable feed adjustment - Pneumatic lifting/lowering of feed roller before first spindle - Quick-change feed rollers - Serrated feed roller Electrical specifications: - Supply voltage: 400 V - Frequency: 50 Hz - IE3 Premium Efficiency motors Control system: - Memory Plus touchscreen control - Storage of axial and radial spindle positions - Electrically adjustable pressure elements - Guided machine setup Right spindle: - Motor power: 11 kW - Spindle diameter: 40 mm - Speed: 7000 rpm - Axial movement: 80 mm - Maximum profiling depth: 35 mm Left spindle: ...
turning diameter: 190 mm turning length: 620 mm control: Fanuc 18 iT max. bar diameter through the spindel: 65 mm number of controlled axis: 9 y-axis: +/- 45 mm turning speed range: 4500 U/min power capacity: 15/11 kW rapid speed: m/min swivelling range: +/- 91 ° Grad number of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/min Spindelpower on driven tool: 5,5/3,7 kW tail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: m weight of the machine ca.: 12,5 t CNC- lathe with sub spindle - 2 turrets, universal for main.- or sub- spindle - upper turret switchable - Y- axis on upper turret - both turrets with 12/24 positions - collet chucks on main- and sub spindle - chip conveyor - parts catcher typ A - few toolings The data for this ad was created with ModulMWS - the software solution of Logo ...
turning diameter: 540 mm turning length: 1020 mm control: FANUC 18 i-TB swing diameter: mm bar diameter: 65 mm travel -x axis: 555 / 185 mm travel -y axis: 160 mm travel -z axis: 1095 mm travel -z axis (sub spindle): 1065 mm spindle speed:: 5000 / 5000 1/min spindle bore: 76 / 76 mm C-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/min Driven Tools: 4.000 U/min b-axis: 240 ° rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 24 m/min drive capacity - spindle motor: 22 / 22 kW voltage: 400 V toolpiece magazine: chain magazine: 40 Pos. tool taper: HSK-A 63 milling drive: 15 kW driven Tools: 5,5 kW total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 4,30 x 2,30 x 2,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC bar-fed lathe, year 2004, CNC 18i-TB. Used machine. More info & price on IndustrialBuyer.
Machine Type: CNC Turning-Milling Center Model No.: NT4200S/1000 Control: FANUC F-31-IA5 MSX711 Year of Make: 2006 Location: Germany Technical features and accessories: - y-axis - Fully indexable b-axis - Chip conveyor, right ejection - Coolant system standard - Interface for high-pressure coolant system 70 bar - Tool spindle with flow cooling - Coolant spray gun - Blowing air through the sub-spindle - Manual tool presetting in the main spindle - Signal light 3-colour - Double footswitch - Simultaneous 5-axis machining - Automatic power shutdown - Tool offset for 5-axis machining - Programmable data input - Dynamic exchange of diameter/radius - Lifting test before movement Turning length: 1,000 mm Bar passage: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/ 15 kW Spindle passage: Ø 73 mm Sub-spindle: Max. speed: 5,000 rpm Drive power ...
Key data: 130 t, 3000 mm
Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.
Key data: 26 mm
Control: Traub TX 8i Main spindle max. rod Ø: 26 mm Max. speed: 8,000 rpm Sub-spindle max. rod Ø 26 mm Max. speed: 8,000 rpm Tool system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front apparatus 5-way with Z3 carriage without drive Reverse processing station (5 tools) without drive IEMCA BOSS 432/44 Bar Feeder
The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm. Additional technical specifications: • Swing circle diameter: max. 700 mm • Rapid traverse: 17.5 m/min • Collet chuck: ISO DIN 173E • Tool holder square: 20 x 20 mm • Tool holder round: 20/25 mm • C-axis resolution: 0.1° • tool places: 14 pieces external • Main spindle: 5, internal: 3 + 4 • Driven tool stations: 2 • Simultaneous machining: inside and outside • spindle power: 7,5 kW
With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets. Additional technical specifications: • Max. swing circle: 360 mm • Collet chuck: ISO DIN 163 E • Tool holder square: 16 x 16 mm • Tool holder Round: 20 mm • Spindle power: 5,5 kW • Tool places in total: 7 pieces - External: 4 / Internal: 3
With documentation and accessories including a two-jaw chuck, diameter: 165 mm, basic tool holders, as well as a collet chuck 173E-42 B. Additional technical specifications: • max. Load: 11,0 kW • Swing diameter over bed: 510 mm • Swing diameter over cross slide: 290 mm • max. turning diameter (recommended): 170 mm • max. turning diameter (technical): 320 mm • travel of X-axis: 400 mm (160 + 15 mm) • travel of Z-axis: 330 [550] mm For further technical data, please refer to the photographed machine specification.
With technical documentation and accessories such as tool holders and a two-jaw as well as a three-jaw chuck, incl. SCHUNK clamping jaws, diameter: 165 mm. Additional technical specifications: • spindle chuck diameter: 169 mm • boring bar diameter: 25 mm • cutting feed X, Z: 0.001 - 500.000 mm/rev
maximum number of results exceeded
please refine your search
190 € 
