127,257 used machines on RESALE, but how to find them? Machine Search
General Manufacturer: Spinner Type: Microturn LT Year of construction: 2024 Control: Siemens One Travels: X 600 mm Z 350 mm Y +/- 50 mm Switch-on hours: 4,587 h Work spindle hybrid bearing Speed: 10,000 rpm Tool/movement Tool holder: BMT45 with Y-axis Tool turret: 12-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: High-precision motor spindle with a circular shape deviation and 1um Power Chuck Röhm KFD-HS 125 Power Chuck SMW Autoblok BH-D 165-46-3-A05 Various owners and AGW High-pressure system 70 bar including fine filter Chip conveyor Spindle coolers
Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production Auction-ID: A7-46048-9
Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-46048-31
Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm Auction-ID: A7-46048-160
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet Auction-ID: A7-46048-7
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production Auction-ID: A7-46048-6
Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-46048-1008
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet Auction-ID: A7-46048-2
LID MAHO DMU 125 T hi-dyn 3-axis CNC universal machining center Control: Heidenhain MillPlus Year of Make: 2002 Powerful and robust 3-axis machining center from DECKEL MAHO. Ideal for complex milling operations in tool, mould and machine construction. Travels • X-travel: 1,250 mm • Y-travel: 880 mm • Z-travel: 800 mm Main spindle • Speed range up to 18,000 rpm⁻¹ • Drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Work table • Table clamping surface: 1,500 × 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool Changer • 30 tool positions • Max. tool diameter: 80 mm • 160 mm with free adjacent position • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total weight in the magazine: 100 kg Feeds • Rapid traverse ...
Hurco BMC 30 HT/M with Ultimax 3 control in compact form: Working area (X/Y/Z): 760 x 460 x 610 mm Table surface: 1,020 x 400 mm Table load: max. 500 kg (optionally up to 700 kg) Spindle speed: max. 8,000 rpm (high torque) Spindle holder: SK 40 Spindle power: 11 kW / 15 kW Tool Changer (ATC): 24 places Rapid traverse (X/Y/Z): 24 / 24 / 15 m/min Control: Ultimax 3 (Dual Screen) Machine weight: approx. 4,800 kg Space requirement: approx. 3.8 x 4.0 x 2.7 m (incl. work area) Auction-ID: A7-46048-1014
Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.
Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg
With extraction; Suction line to the valve Auction-ID: A1-43429-17
Reading hours: approx. 67,741 h (machine) / approx. 21,617 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-2
Maximum tool weight: 7kg, Maximum tool length: 300mm. Equipped with: (1x) 16-way tool changer, (1x) chip conveyor, (1x) cooling/filter unit, (1x) spindle cooler, (1x) external cooling unit. Auction-ID: A1-45979-4
Reading hours: approx. 66.283 h (machine) / approx. 21.312 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-3
Machine serviced and 1 year warranty on replaced parts: New brocaded motor X and Y Axis Pinion and Pinion. On-board computer and runners Possibility to have a 4th focused on request with an extra charge. As well as an optional 2D laser Training that can take place at the seller's premises or by means of an on-site supplement ( French - English - Dutch - German - Russian) The machine will be available 6-8 weeks after payment of the deposit. The seller can take care of the transport but not the unloading (additional quote) Can take care of the installation work in the control room (additional quote) Vacuum pump 170m3 /h Auction-ID: A3-43519-35563
Tube bending machine Type: ELECT 52 Manufacturer: BLM Year: 2020 bent only 5,000 parts Control: Simens Simotion CNC 9 axis Max bending diameter: 52 mm Technical data see pictures With following tools-sets: D20 tube CLR40 + variable bend D25 tube CLR67,5 + variable bend D40 tube CLR40 25x25 tube CLR75 Extended version – it can bend up to 6m long tubes Condition of new machine, under power Find more here - / Contact us at -
CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -
CNC tube banding machine Type: ELECT 52 Manufacturer: BLM Year: 2016 Fully electric dual-direction tube bending machine (9-axis) Control: Siemens SIMOTION Cycle hour counter: 7344 Number of parts produced: 5143 Mandrel rod set length: 4.2 m + extension of usable length to 4.5 m 3D visual programming system (VGP3D) – software for 3D graphical programming with feasibility analysis and bending process optimization B-RIGHT – automatic springback and elongation correction BOOSTER 20 – pushing booster with 2000 kg force Machine toolings: bending tools for tubes: Ø17.2 (r-68.6 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø21.3 (r-70.7 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters Ø26.9 (r-83.5 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø33.7 (r-107 mm) fixed ...
A double-turret and double-spindle turning center Biglia including peripherals is available. Spindle power: 11kW/11kW, speed: 7000rpm, bar capacity: 36mm-37.5mm, max. turning diameter: 100mm, max. turning length: 140mm, tool stations: 2×12, Y-axis travel: +/-25mm, X/Z-axis travel: 85mm/300mm, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 3700mm/1450mm/1900mm, weight: approx. 5000kg, control: Mitsubishi M730 with editor, power-on hours: approx. 47000h. Including FMB turbo 3-36 bar loader, Knoll KF10 coolant system, 700l tank, air cleaning unit and an extensive package of collets and tools. Documentation available. An on-site inspection is possible. Expected to be available starting October 2026.
A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible.
Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.
MAZAK MTV 414 CNC vertical machining center was built in 1992 in the United Kingdom by YAMAZAKI MACHINERY UK LTD. The offered machine is an excellent choice for machining workpieces with a maximum weight of 500 kg. Thanks to its reliable components and extremely rigid design, the MAZAK MTV 414 guarantees the best machining results throughout its service life. The machining process is performed inside a large work area with a work table with a length of 900 mm and a width of 410 mm, a spindle and a capacious tool magazine. The spindle, driven by a powerful motor, rotates at a maximum speed of 7000 rpm and operates in three X,Y,Z axes with feeds of 560 mm, 410 mm and 460 mm respectively. All cutting tools are stored in a 24-position tool magazine with an automatic tool changing system (ATC). All this is complemented by the intelligent MAZATROL M32B CNC controller with its intuitive interfa ...
A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.
OKUMA LB 300 M CNC turning center was built in 2006 in Japan by OKUMA Corporation. The machine, designed for even the most demanding production challenges, is an excellent choice for both unit and series production. Its extensive machining capabilities enable a wide range of complex operations, such as turning or threading, to be realised with the highest accuracy and repeatability. The workspace of the OKUMA LB 300 M machine has been fully maximised in relation to its compact dimensions in order to ensure complete freedom of operation. It features, among others, an inclined bed, a reliable spindle and a 12-position turret. The spindle, driven by a high-powered motor, reaches a maximum speed of 4500 rpm and moves in two X,Z axes with feeds of 260 mm and 520 mm respectively. All cutting tools are stored in a 12-position turret, which offers fast and reliable operation. Precise position ...
A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible.
A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.
Distance between the centres ( mm) 755 Type cnc Stroke ( X/mm) 230 Stroke ( Z/mm) 700 Number of spindle per minute mm 1 ' 20 Number of inserts in the tool magazine 12 Bar passage ( mm) 64 Chuck connection din 55026 a2-6” Hole diameter in the chuck (mm) 76 Sleeve diameter ( mm) 95 Machine Conditions ce marked
Joint milling, adhesive unit, pressure zone, chop saws, radius milling, radius scrapers, flat scrapers Auction-ID: A1-41994-2
12 meters, 12 KW, 5 KW-Flex, Mark, label printer external Auction-ID: A1-41994-1
Reading hours reading 9845 HR, equipped with granite table + upper frame, control panel, 2x screen, various documentation, Auction-ID: A1-43992-35
6-60 mm, joint cutter, multi-cutter, copy, scrapers radius/phase, Auction-ID: A1-41994-3
Technical Specifications Maximum Rotating Diameter: 420mm Maximum turning length: 291 mm Maximum turning diameter: 320 mm Left rpm: 3200 rpm; 7.5-11 kW X-axis travel: 190 mm Z-axis travel: 350 mm X-Z rapid feed speeds: 24 - 30 m/min Tool Holder: 12 Positions Control: FANUC 0i-TF Approximate weight: 3500 Kg Approximate Footprint: 2214mm x 2220mm x 2713mm Accessories: Chip evader ; Remote handwheel Notes: Complete with 16-position gantry loading system Item sold in unverified status Auction-ID: A1-44614-2
Technical Specifications X-axis travel: 1800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Fast feed rates X - Y - Z: 50 m/min Spindle speed: 10-10000 rpm; 7.5 - 11 kW Random Tool Magazine: 30 Positions Control: FANUC 21i MB Approximate weight: 7500 Kg Accessories: Chip Conveyor Notes: Bulkhead for pendulum work Item sold in unverified status Auction-ID: A1-44614-18
Technical Specifications X-axis travel: 1250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Spindle nose distance from table table: 100 - 850 mm X-Y-Z fast feeds: 15 m/min Maximum spindle speed: 4000 rpm; 26 kW; ISO 50 - DIN Pallet: N.2 Table dimensions: 650 x 1400 mm Maximum load allowed: 1500 Kg High pressure: 30 Bar Random tool magazine: 41 positions Maximum tool diameter: 120 (200) mm Maximum tool length: 400 mm Maximum tool weight: 20 Kg Control: FANUC 16i-M Approximate weight: 16750 Kg Approximate footprint: 7135 x 5300 x 3426 mm Accessories: Chip conveyor ; Range change Item sold in unverified status Auction-ID: A1-44614-3
Technical Specifications Longitudinal stroke: 4000 mm Vertical travel: 1250 mm Ram stroke: 1000 mm Fast feeds: L-T-V 16 - 15 - 15 m/min Table dimensions: 5000 x 1000 mm Table height from floor level: 1100 mm Maximum spindle speed: 3000 rpm; 28 kW; ISO 50 Head: Manual Bi-rotary Random tool magazine: 20 positions Control: SELCA S3045 Range Change: 2 Speed Accessories: Remote handwheel ; Chip evacuator Notes: Head on TUH 10LT ram Item sold in unverified status Auction-ID: A1-44614-4
Technical Specifications X-axis travel: 2000 mm Y-axis travel: 1600 mm Z-axis travel: 1800 mm Spindle: 4000 rpm; 37 kW; 794 Nm; BIG PLUS ISO 50 Pallet: N.4 ; 1000X1000 mm Maximum load allowed: 3000 Kg Maximum machinable workpiece size: ø 1550 mm High pressure: 30 Bar Chain type tool magazine: 306 Positions Maximum tool weight: 35 Kg Head: Automatic rotary 1° Control: SIEMENS 840 D Accessories Chip Conveyor ; Optical Scales ; Renishaw Touch Probe Item sold in unverified status Auction-ID: A1-44614-15
A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible.
Technical Specifications X-axis travel: 1000 mm Y-axis travel: 850 mm Z-axis travel: 750 mm Spindle nose distance table table: 50 - 900 mm Rapid feed rates X-Y-Z: 30 m/min Spindle 15000 rpm; 30 kW; ISO 50 - BT Pallet: Indexed ; N.15 ; 630x630 mm High pressure 70 Bar Chain type tool magazine: 225 positions Maximum tool diameter: 120 mm Maximum tool length: 500 mm Maximum tool weight: 27 Kg Control: FANUC 16i-M Accessories: Chip conveyor ; Tool setting ; Workpiece probe Item sold in unverified status Auction-ID: A1-44614-7
A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible.
Technical Specifications Axes: Y1 - Y2 - X1 - X2 - R - Z1 - Z2 Maximum bending length: 3100 mm Labor force: 130 tons Stomp stroke: 400 mm Approach speed: 150 mm/sec Ascent speed: 150 mm/sec Working Speed: 1-10mm/sec Engine power: 18.5 kW Approximate weight: 14200 Kg Approximate dimensions: 4435 x 2734 x 3095 mm Notes: Complete with internal and external positioners Item sold in unverified status. Auction-ID: A1-44614-1
Automatische roterende freeskop: 90° en 45° Automatische gereedschapswisselaar met 30 posities spanentransporteur koelunit + filter maximaal werkstukgewicht 6 ton Longitudinal travel X-axe: 1700 mm Cross travel Y-axe: 1200 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 2000 x 1000 mm Max height workpiece: 934 mm Power on spindle: 22 kW Admission in millinghead (ISO): BT50 Max speedrange: 35 > 3000 rpm Control: Heidenhain Power needed (KVA): 56 kVa Length : 5300 mm Depth: 4950 mm Height: 2800 mm Weight: 18 ton
Technical Specifications X-axis travel: 2000 mm Y-axis travel: 1300 mm Z-axis travel: 1200 mm Spindle: 60-6000 rpm; 30-37 kW; ISO 50 - BT Pallet: N.2 ; 1000X1000 mm Maximum load allowed: 3000 Kg Random tool magazine: 120 positions Control: MSC 502 Approximate weight: 35200 Kg Approximate dimensions: 5330 x 7720 x 3810 mm Accessories: High pressure; Chip conveyor; RS232 port; Tool presetting Notes: Maximum workpiece diameter 2000 mm; Maximum workpiece height 1550 mm; Item sold in unverified status Auction-ID: A1-44614-21
SALE ONLY OUTSIDE GERMANY. https://youtu.be/EPCrzSsUe2U Including coating and stacking Retrofit 2016 Ready for use Including stacking and unstacking gantry crane Auction-ID: A1-46310-1
2 x CNC lathe Type: KIT 450 Manufacturer: HYUNDAI-KIA Year: 2006 Control: Fanuc Series 0i-TC X: 400 mm Z: 250 mm Max spindle speed: 6000 rpm Machine weight: 2700 kg Chip conveyor Tool holders In good condition, fully functional, under power Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
2.000 € 
