138,017 used machines on RESALE, but how to find them? Machine Search
Key data: 100 t
Hydraulic flat, bar. Profile and angle steel shears with notching device and hole punch Make: Muhr + Bender (Mubea) Model No.: HIW 1000 Year of Make: 1990 -Punching force: 1000 KN = 100 tons. -Hole punch: Ø 40 mm in 22 mm material -Angle steel shears 90°: 160 x 16 mm -Flat steel shears: 600 x 15 mm -Notching device: sheets 13 mm Weight: 2550 kg Visually good condition Technical good condition Accessories: Punches and matrices see photo no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense
Forklift available for loading Auction-ID: A3-46161-19022
Die-cut crucible Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, immediately available We have two more Gietz models. Please request a quote. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Stamping jar Simplacutter, 72 x 102 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
sheet width:400 mm plate length:500 mm plate thickness:4 mm total power requirement:0,5 kW Punching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting
air pressure:8 bar Air consumption:NI 18 l/min. weight:110 kg dimensions of the machine ca.:700 x 300 x 1000 mm
Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units
Table surface ... 3070x1660mm Nominal pressing force ... 18t Axis X ... 3070mm Axis Y ... 1660mm Max. sheet thickness ... 6.4mm Number of positions in the tool changer ... 22 Control Machine weight ... 14850kg L x W x H ... 7600x6700x2230mm The machine is in good condition, possible to test under power.
Inv. Num. : 7935 Type: Trumatic 2000 R Producer: Trumpf Created: 2003 Parameters: Compressive force: 18 t Maximum length of sheet metal plate: 2070 mm Maximum blade width: 1270 mm Maximum sheet metal plate weight: 75 kg Max. sheet thickness: 6.4 mm Maximum punching speed: 900 1/min Machine height: 2070 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg
Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2R Baujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universelle Stanzmaschine - Punching machine PRINTEX 75261D1 Serial-No. 75261D1- Für Platiktüten - Folien - Papier - Karton For Platic Bags - Foils - Paper - Karton 2 Hand-Auslösung 2 Hand release Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universelle Stanzmaschine - Punching machine PRINTEX 10097 Serial-No. 10097- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nennstrom / Power 10 A 2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universelle Stanzmaschine - Universal Punching machine SKAG SP347 Serial-No. SP347 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universelle Stanzmaschine - Punching machine Masfeld ZEL 1903 Serial-No. 1903 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universelle Stanzmaschine - Punching machine Krause 101073 Serial-No. 101073 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SM Schlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t stroke: 10-80 mm no. of strokes: 65-400 Hub/min ram - range of adjustment: 80 mm table surface area: 1030x550 mm ram surface: 920x450 mm hole in the table: 700x200 mm : 420 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 10-130 mm no. of strokes: 30-90 Hub/min throat: 330 mm ram - range of adjustment: 100 mm table surface area: 950x660 mm ram surface: 540x440 mm hole in the table: Ø 230 mm table height: 1000 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t stroke: 8-38 mm no. of strokes: 100-1800 Hub/min table surface area: 400x400 mm table pass: 380x80 mm table height: 1000 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1600x1600x3100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t stroke: 4-60 mm no. of strokes: 85-500 Hub/min ram - range of adjustment: 80 mm : 320 mm table surface area: 750x600 mm ram surface: 750x600 mm total power requirement: 31 kW weight of the machine ca.: 8,2 t dimensions of the machine ca.: BxTxH 2900x1900x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t stroke: 6-60 mm no. of strokes: 90-550 Hub/min : 300 mm table surface area: 780x600 mm ram surface: 807x460 mm tool hole in ram: Ø 40 mm ram - range of adjustment: 80 mm total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2900x2000x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t stroke: 37 mm no. of strokes: 30-240 Hub/min ram adjustment: 150 mm table surface area: 1200x1000 mm hole in the table: 500x180 mm tool hole in ram: Ø52 mm total power requirement: 50 kW weight of the machine ca.: 35 t dimensions of the machine ca.: LxBxH 3700x2300x3900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t no. of strokes: 60-300 Hub/min sheet width: 150 mm ram - range of adjustment: 6-50 mm table surface area: 350x400 mm ram surface: 250x250 mm hole in the table: 130x150 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t stroke: 8-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 100 mm table surface area: 900x625 mm ram surface: 600x280 mm hole in the table: Ø 150 mm table height: 1000 mm tool hole in ram: Ø 40 mm : 490 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 1800x2200x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t stroke: 37 mm no. of strokes: 30-240 Hub/min ram adjustment: 150 mm table surface area: 1200x1000 mm hole in the table: 500x180 mm tool hole in ram: Ø52 mm total power requirement: 50 kW weight of the machine ca.: 35 t dimensions of the machine ca.: LxBxH 3700x2300x3900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t distance between columns: 450 mm stroke: 20-50 mm ram - range of adjustment: 60 mm table surface area: 370x400 mm ram surface: 250x370 mm hole in the table: 120x280 mm table height: 850 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1600x1300x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
2014 EUROMAC MTX Punching machine Type: MTX Manufacturer: Euromac Year: 2014 Total hours: 19932 Operating hours: 12452 Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60of which rotary ones - continuously 360° 30 Maximum punch diameter (size D) – separate 81 mm The maximum diameter of the punch in the magazine XMTE4M 4 x 31.7 mm The maximum diameter of the punch in the magazine XMTE6M 6 x 24.0 mm The maximum diameter of the punch in the magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in the Y axis (with Multitool) 1300 mm Working range in the Y axis (single tool) 1250 mm Working range in the X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic repositioning of clamps in the X axis up to 10,000 mm Max. positioning speed in the Y+X axi ...
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)
max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!
Hydraulic punching machine AMADA VIPROS QUEEN 368 with 45 stations. Equipped with FANUC 04PC numerical control, auto-index interface, 4 sheet clamping jaws + 2 base clamp plates, Equifab cooler, PUNCH 5 programming software with automatic nesting, and a set of punch holders. Power ON Hours: 3595H 35M 27S Cycle ON Hours: 1535H 16M 14S Total Hits: 12700196 Manufacturer: AMADA Model: VIPROS 368 QUEEN CNC Control: FANUC 04PC Year of Manufacture: 2001 Number of Stations: 45 Number of Indexed Tools: 4 Maximum Thickness (Standard Steel): 6mm Frame Construction: Bridge-type Press Capacity: 30 tons (294 kN) Press Type: High-speed servo hydraulic cylinder Axis Travel Distance: 1525 x 2000 mm Maximum Sheet Size: 1525 x 4000 mm (with automatic repositioning) Maximum Material Thickness: 3.2 mm mild steel Maximum Hole Diameter (Material Max Cutting Strength 36 kg/mm²): 82 mm diamete ...
Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg
Hot foil stamping machine with original installation on the GTP model. In production.
Used mitre punch with support right extended
Max. punching force: 50 kN Stroke actuation via footswitch
Miter punch With table extension With foot lever With table extension Technical features: Double mitres 45º Simple mitres 90° Maximum cutting height 160 mm Maximum cutting width 110 mm Weight approx. 50 kg
Size: A4 Equipments: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph
maximum number of results exceeded
please refine your search
500 € 
