cnc punching machine used for sale

Milling machine MH1600 The basic machine was built in 1990 but was rebuilt from scratch in 2015 by the company MMD Bad Emstal, as well as control conversion to iTNC530 (Guideways sanded and scraped, KGT new or overhauled, bearings new, etc. etc..) (so the machine was new again in 2015) iTNC530 IKZ air and water through spindle center Rotoclear Chip conveyor SK 50 Chain 32 WZ Transport beam Crane loading possible Machine is provisionally connected to the power connection and can be visited by appointment

Key data: 570 mm, 2000 mm, 2500 1/min

The WEILER E50HD x 2000 is a robust, cycle-controlled precision lathe for single part and small batch production. It offers a centre width of 2,000 mm, a rotation diameter over bed of 570 mm, a speed range of 1–2,500 rpm and a 20 kW main drive with high torque up to 1,300 Nm. The machine is designed for demanding turning operations and combines manual work with convenient WEILER cycle control and an easily accessible working area.

turning diameter: 680 mm turning length: 600-635 mm control: Siemens total power requirement: kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mm turning length: 500 mm control: OSP 7000L total power requirement: kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With CNC control, HEIDENHAIN, type: TNC 155, with touch probe Travel: x=700 y=550 z=550mm. Size table area 1000 x 490 mm Accessories: Chip conveyor / coolant system / tool holders SK3. Machine is presentably ready for operation under power. Milling machine with protective cabin. The milling machine can be operated at any time without protective cladding and is then "quite handy". Dimensions of milling machine: , width is 1.6m, depth is 2.3m, height is 2.15m and cabinet width is 1.5m

Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible.

NUKON EXTREME LASER 25180 12kW fiber laser was built in 2021 in Turkey by NUKON Laser Cutting Machines Co. The machine is designed for precision cutting of large-format sheet metal with maximum dimensions of 12000 x 2500 mm. Thanks to the use of many state-of-the-art technical solutions, it is perfect for both unit and series production, guaranteeing high quality and repeatability of the manufactured parts. The NUKON EXTREME LASER 25180 performs 5-axis laser cutting with the NLCH cutting head, designed for demanding industrial environments. A number of unique features are incorporated inside the aluminium body to ensure the head meets and surpasses current industry standards. The focusing system used, together with the high-end optical system, enables accurate cutting of even very thin workpieces while maintaining high edge quality. In addition, the high energy efficiency optimises en ...

A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible.

A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.

A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.

Key data: 4000 mm, 2000 mm, 12000 W

4000 x 2000mm BeamShaper 12KW FIBER

A CNC tool grinding machine Ewag for rotationally symmetrical tools is available. Travel X/Y/Z: 460mm/190mm/730mm, Rapid traverse: 6m/min, Max. tool length: 500mm, Spindle interface: ISO50. Machine dimensions X/Y/Z: approx. 3300mm/2300mm/2500mm, Weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Key data: 4500 mm, 5500 mm, 3500 mm

Built in 1978 Mount: Capto C 6 The axles : Y and Z have been overhauled With face plate extension: approx. 8500 mm. Crossbeam Support Extension Horizontal: 2950mm Main motor power: 55 Kw Control: Siemens 840D SL New control cabinet Face plate: New face plate drive. Hdrostatic face plate bearing Machine is energized All information without guarantee. Subject to prior sale Extensive tools Control station for faceplate monitoring

Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example.

An optical 3D coordinate measuring machine Keyence is available. Measurement accuracy: +/-10µm, repeatability: +/-2µm, measurement points: 9 million, max. measurement diameter: 300mm, max. measurement height: 200mm, max. measurement dimensions (multiple capture) X/Y/Z: 580mm/300mm/200mm, max. workpiece weight: 50kg, table tilt: 45°. Including control and evaluation software, rotary table and calibration accessories. Documentation available. An on-site inspection is possible. The image is an example.

A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accuracy: 2.3+/-0.3/100µm, max. travel speed: 693mm/s. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/3600mm, weight: approx. 6150kg, control: Mcosmos-3 V4.3. Documentation available. An on-site inspection is possible.

A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10 ...

TRAUB TNC 42/65 CNC Lathe TECHNICAL FEATURES: Year: 2009 NC Type: TRAUB TX8i Number of axes: 8 Y-axis travel: +/- 35 [mm] Z1 axle stroke: 450 [mm] X1 axis stroke: 140 [mm] Z2 axis stroke: 520 [mm] X2 axle stroke: 140 [mm] E-axis stroke: 450 [mm] Spindle Bore: 42 [mm] Maximum speed Spindle: 5600 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 18.5 [kW] Counter-spindle bore diameter: 42 [mm] Maximum speed Spindle: 5600 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Toolholder type: VDI 30 Number of positions - Turret 1 : 14 Number of motorized stations - Turret 1 : 14 Maximum speed Rotating Tools - Turret 1: 4000 [RPM] Number of positions - Turret 2: 14 Number of motorized stations - Turret 2: 14 Maximum speed Rotating Tools - Turret 2: 4000 [RPM] Installed power: 107 [kVA] Rated Current: 85 [A] Supply voltage: 400 [V ...

A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible.

x-travel: 1750 mm y-travel: 1400 mm z-travel: 700 mm control: Heidenhain TNC 530 Torque: 101 Nm turning speeds: 15000 U/min spindle taper: HSK A63 engine output: 22 / 18 kW table-size: 1200 mm table load: 5000 kg tool change unit: 60-fach column daylight: 1430 mm distance table - lower edge spindle: 105 - 905 mm A-Axis: 360 / 0,001 ° B-axis (table): 0,001 ° column daylight: 1430 mm total power requirement: 52,9 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 6,2 x 3,75 x 4,3 m 5 axes simultaneous - CNC control Heidenhain TNC 530 - Milling head - Coolant design: external cooling + air, internal cooling + air (60 bar) - Tool changer 60-fold (HSK-A63) - chip conveyor - Electronic handwheel - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115m ...

CNC VERTICAL LATHE YOUJI MODEL YV-800E + C, EQUIPPED WITH FANUC 18T CONTROLLER, AND ROTARY TOOLS. Technical specification: - max turning diameter 1000 mm - max turning diameter 900 mm - max turning height 800 mm Working movements: - x transverse movement - 50 / + 810 mm - z vertical movement 880 mm - x rapid movement 20 m / min - z rapid movement 20 m / min - feed rate 0.001-500 mm / rev - feed rate in manual operation ( JOG ) 0 - 1260 mm / min - x feed motor FANUC AC 3.7 kW - z feed motor FANUC AC 3.7 kW Spindle: - spindle motor FANUC AC Alpha P40, cont. / 30 min 18.5 / 22 Kw - spindle motor gearbox 2 ranges manufacturer ZF, Germany - revolutions 10 - 800 k / min - spindle head A2-11 - spindle bearing dia. 330 mm Tools: - 12-station turret VDI - external turning holder 32 mm - internal turning holder dia. 50 mm Rotating tools: - max revolutions / min 3800 k / m ...

A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible.

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible.

A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment.

Key data: 298 mm, 572 mm, 4000 1/min

Inv. Num. : 9320 Type: ST 20Y Producer: HAAS Created: 2022 Parameters: Switch-on hours: 1565 h Operating hours: 236 h Max. turning length: 572 mm Maximum turning diameter: 298 mm Grinding diameter: 533 mm Maximum length of travel in the X-axis: 213 mm Maximum length of travel in the Y-axis: 51 mm Maximum feed in the Z-axis: 572 mm Maximum spindle speed: 4000 1/min Maximum main spindle power: 14.9 kW Max. rod diameter: 64 mm Lathe chuck diameter: 210 mm Spindle bore: 88.9 mm Weight: 4754 kg

A Deckel CNC universal milling machine is offered. Travel X/Y/Z: 700mm/600mm/550mm, quill stroke: 80mm, milling head swivel range: +/-90°, spindle power: 12kW, max. spindle speed: 6300rpm, feed torque X/Y/Z: 13Nm/13Nm/21Nm, feed rate X/Y/Z: 6m/min, rapid traverse X/Y/Z: 6m/min, tool holder: SK40, measuring resolution: 0.001mm, 4th axis resolution: 0.001°, max. slide load: 1000kg, number of T-slots: 1, T-slot width: 14H7mm, mounting holes for table accessories: M12, control: Deckel Dialog 11. Machine weight: approx. 3900kg, electrical cabinet weight: approx. 475kg, 5110mm/4654mm/2335mm, floor space X/Y: approx. 6200mm/5700mm, floor load: 3500kg/m². Documentation available. Inspection by appointment possible.

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Inv. Num. : 9324 Type: 3000x2100 Producer: CYBERTRONIC Robotic Created: 2022 Parameters: Work table length: 3000 mm Work table width: 2100 mm Number of Spindles: 2 pieces The offer includes: Blower/suction unit Dust Extraction OP-2200 Piston compressor MK 103-90-3M PC and software for CNC control Cables Basic accessories

A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Expected to be available starting 2027.

A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A CNC 3-axis bed milling machine by Auerbach is offered. Travels X/Y/Z: 2000mm/1000mm/900mm, table load: 6000kg, tool interface: SK50, tool stations: 46, spindle speed: 3500rpm, operating hours: 38000h, control: Heidenhain TNC426, including SEMPUCO KFU-2/45/021 universal milling head, weight: 200kg. Equipped with a 3D infrared probe, electronic handwheel, chip conveyor with coolant system, large air conditioning unit for the electrical cabinet, milling table with 5 T-slots at 22mm. Machine dimensions X/Y/Z: 5500mm/4100mm/2700mm, weight: 13t. Complete machine overhaul by the manufacturer in 2015. Drive motor for the Z-axis available as a spare part. Documentation available. Inspection possible by appointment.

turning diameter: max. 750 mm turning length: 3.500 mm turning length: Standard: 3.071 mm control: Sinumerik 840 D Siemens Working height: 1.300 mm axis stroke:: x-travel: 435 mm z-travel: 3.071 mm max. workpiece weight between centers: 2.000 kg Main spindle:: turning speed range - main spindle: 10 - 3.000 min/-1 power capacity - main spindel: 61,2 / 195 kW max. Torque: 779 Nm spindle head: A 11 DIN 55026 spindle diameter in front bearing: 180 mm Subspindle:: Spindle speed range subspindle: 10 - 3.000 min/-1 power capacity - Sub spindle: 73 / 233 kW max. Torque: 932 Nm spindle head: A 11 DIN 55026 spindle diameter in front bearing: 180 mm Turret 1:: U-axis: min. -5 - max. 430 mm w-axis: min. 276 - max. 3.347 mm tool taper: VDI 50 number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tool stations: max. 3.000 min -1 power capacity - driven to ...

CNC lathe Gildemeister Twin 65Y RG2 Year of Make: 2003 Control Siemens 840D CNC Twin Spindle Turning Center Design Main/Sub-Spindle Yes Turret 2 × 12 stations Tool holder VDI 30 Powered Tools Yes Y-axis Yes (upper turret) C-axis main and counter spindle Workspace Feature Value Max. turning diameter 250 mm Max. turning length 650 mm Max. turning Ø over bed approx. 340 mm Bar passage 65 mm Main spindle Feature Value Speed 20–5,000 min⁻¹ Power 35 kW Gjbr U Uozl Dy Nek Rhsud Torque 370 Nm C-axis 0.001° Sub-spindle Feature Value Speed 20–5,000 min⁻¹ Power 35 kW Torque up to 370 Nm Bar passage 65 mm C-axis 0.001° Travels Axis Value X1 300 mm Z1 650 mm Y 80 mm (±40 mm) X2 180 mm Z2 650 mm Tool turret Number of stations 12 + 12 Tool holder VDI 30 Driven tools 4,000 min⁻¹ Power tool drive 11 kW Torque tool drive 28 Nm Chip conveyor Hig ...

Key data: 6500 mm, 2000 mm, 1200 mm

Testa automatica universale: indicizzazione automatica ogni 2,5° × 2,5° per la massima versatilità nelle lavorazioni multiangolo Magazzino utensili: automatico per rapidi cambi utensile e maggiore produttività Grazie alla sua ampia area di lavoro e alla testa universale automatica, la SORALUCE SP8000 è ideale per operazioni di fresatura, alesatura e foratura su componenti di grandi dimensioni destinati ai settori della meccanica generale, energia, stampi e costruzioni industriali. VISIBILE MONTATA FINO A FINE SETTEMBRE 2026!

A vertical EMAG CNC lathe is available. Workpiece length range: 22mm-100mm, turning length: 100mm, max. swing diameter: 220mm, tool stations: 12, measuring length: 94mm, spindle speed: 6500rpm. Machine dimensions X/Y/Z: approx. 2400mm/3300mm/2950mm, weight: approx. 10000kg. Including tool setting probe, chip conveyor, 120bar high-pressure pump, Heilig workpiece shuttle system with two stations and coolant system. Documentation available. An on-site inspection is possible.

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible.

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible.

A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible.

A vertical CNC lathe Emag is available. Speed: 4500rpm, Tool stations: 12, Travel X/Z: 570mm/200mm, Max. chuck diameter: 260mm, Max. turning diameter: 260mm, Max. machining diameter: 220mm, Max. workpiece length: 110mm, Rapid traverse X: 60m/min, Rapid traverse Z: 30m/min, Feed force: 5.5kN, Max. workpiece weight: 120kg, Weight: approx. 6500kg, Control: Siemens Sinumerik 840. Documentation available. An on-site inspection is possible.

A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible.

Key data: 210 mm, 305 mm, 5000 1/min

12-station turret (non-driven) Tool holder MK 3 Chip conveyor Rod Feed Pipe IRCO DS 34.8 (YOC 2013) Dimensions LxWxH: - Machine 4000 x 1700 x 1700 mm - Feed pipe 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Control Fanuc ... 0i-TF Plus Max. workpiece diameter ... 3000mm Clamping table surface ... 2800mm Max. table load ... 18000kg Max. workpiece height ... 1800mm Axis Z ... 1250mm Plunger cut ... 320mm Number of positions in the tool changer... 12 Main engine power ... 75kW Machine weight... 40000kg Table speed ... 1-100/min The machine has undergone a complete overhaul. More info on request. - New hydraulic power unit - New electrics - New control cabinet - new warehouses - New paint job - New linear guide - New cooling system - Chip conveyors - CE - Documentation

x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bed milling machine Anayak VHPlus 2000 Travel: X: 2,000mm Y: 1,200mm Z: 1,050mm Diagonal milling head 45° Spindle: SK50 Power: Kw 30/35 Spindle speed: 4,000 rpm Coolant system Tool changer: 30 places, chain magazine Control: Heidenhain TNC426 Handwheel Export documentation and export possible for an extra charge. Viewing possible under power. We will be happy to send you further details or arrange an on-site exposure.

Key data: 3050 mm, 800 mm, 850 mm

From location: CNC Bed Milling Machine Manufacturer: TOS Kurim Type: FSS 80 Year of Make: 1991 Control: Heidenhain TNC 407 Two-spindle H-V head that rotates automatically programmatically (horizontal/vertical) • Table clamping surface 800x3000 mm • X-axis working stroke (longitudinal) 3050 mm • Transverse stroke 800 mm • Vertical working stroke 850 (790) mm • Spindle taper ISO 50 • Spindle turning range 9 - 2000 rpm -1 • Working position. continuous 1 - 3000 mm / min -1 • Fast feed .. 8000 mm/min -1 • 22 kW spindle motor • Machine dimensions 7660x3470x2740 • Total machine weight 14400 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Kelco total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.