134,856 used machines on RESALE, but how to find them? Machine Search
used
Laser capacity 3kw Laser type fiber Band width from 10 to 130 mm. Number of axes 8
"The machine is in good technical condition, a test run is possible by prior arrangement."
The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.
Key data: 400 mm
CNC Universal Cylindrical Grinding Machine with Internal Grinding Device External and internal grinding AZ Model RUX 1800 Year of manufacture 2018 Siemens Sinumerik 840D controller Grinding diameter 400 mm Center width 1900 mm Workpiece weight without steady rest 650 kg Grinding wheel diameter 660 x width 100 x bore 305 mm Grinding wheel spindle speeds 300 - 1500 rpm. Manually rotatable grinding wheel head 0 - +20° Internal grinding spindle Grinding wheel size 115 x 49 x 55 mm X-axis 480 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. Z-axis 2740 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. HEADSTOCK Speeds 5-400 rpm. Bezel SMW AUTOBLOK Premium Line Coolant Setup Offer number V-7059
T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, , Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark
Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement
A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.
A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.
A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.
Siemens 840D Control - Iemca Boss 545E-r/32 barfeed - Nanocool CIL750 A-CT oil cooler - machine has worked with oil
A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible.
Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table
CNC lathe Padovani BJ 1996 including the stainless steel tub
CNC control in the control panel / machine operating terminalCNC path control FANUCTtype A14B - 0048 - 0002Year of construction: 1990- Machine control panel- electronic handwheel- Flexible silicone PC keyboardDimensions WxHxD: 600 x 260 x 350 mmWeight: approx. 40 kgComes from a GILDEMEISTER CNC lathe.From stock, function not tested, ideal as a spare parts carrier.; used
A CNC 4-axis wet processing machine (dental milling machine) vhf of the first generation is available. Axes: 4, speed: 60000rpm, max. block dimensions X/Y/Z: 45mm/20mm/20mm, repeat accuracy: +/-3µm, axis of rotation: 200°, materials: glass ceramic/zirconium/composite/titanium/CoCr. Machine dimensions X/Y/Z: approx. 365mm/460mm/475mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.
CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post
A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.
A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensio ...
Key data: 32 mm, 8000 1/min
Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,131 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck
turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...
Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,616 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck
Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,889 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck
Key data: 32 mm, 8000 1/min
Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2015 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 52,356 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck
A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible.
Inv. Num. : 8549 Type: Cutex-160B MC Producer: Hwacheon Created: 2017 Parameters: Control system: FANUC 0i-SERIES (TF) Max. turning diameter: 260 mm Maximum turning diameter over bed: 550 mm Maximum spindle speed: 4500 1/min Lathe chuck diameter: 200 mm Weight: 3280 kg
Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.
A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.
Collet Chuck Kitagawa DHP65 A8 New in the box For type Hainbuch collets
CMZ TTL-66-66-T1Y-T2Y+GL20II CNC Lathe GENERAL Project No.: 905769 Quantity: 1 pcs. Manufacturer: CMZ Type: TTL-66-66-T1Y-T2Y+GL20II Control: Fanuc 31i B Year of Make: 2021 Condition: Used machine Approx (hrs): 9050 DESCRIPTION TURN Max. turning diameter 220 mm Max. workpiece length 614 mm Max. circumferential diameter over bed cover 240 mm Max. chuck diameter 210 mm Max. distance between the two spindle lugs 800 mm Max. speed main spindle 4000 1/min Max. power main spindle at ED 10-40/100% 35.5/23.5 kW Max. torque main spindle at ED 10-40/100% 205/150 Nm Spindle aperture main spindle 72.5/66 mm Spindle diameter in the front bearing main spindle 110 mm Spindle flange size main spindle ASA 6 A2 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Stop device in the main spindle Coolant supply through the main spindle Max. s ...
Key data: 1010 mm, 3000 mm
Cycle lathe Seiger SLZ 1000 Year of construction 2009 Cycle lathe Seiger SLZ 1000 Year of construction 2009 Center width 3000mm Circulation over bed 1010 Circulation via face slide 650 Drive at 100% ED 37KW at 60/ ED 52KW Max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z Feed force max 16000N Control Heidenhain Manual Turn with face plate and steady rest The offer is aimed exclusively at tradespeople within the meaning of §14 BGB
: 0583 mm : 1710 mm : : 82 mm : 436 mm : 2500 U/min : A1-8 DIN 55026 : 100 mm : 235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8568 Type:- Producer:- Created: 1980, GO 2025 Parameters: GO 2025: Complete replacement of the electrical system Addition to the NC control system Replacement of hydraulics (servo drives) Fortuna for internal grinding Rotary Table X Replacement of worn parts Grinding the bed
Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...
Key data: 3000 mm, 1500 mm, 4000 W
3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading
Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.
A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
