cnc punching machine used for sale

Heidelberg Cylinder SBB Age: 1969 The Cutting machine Size: 57x82 cm

Heidelberg Cylinder SGS The Cutting machine Age: 1973 Max. Sheet Size: 72 x 104 cm Min. Sheet Size: 40 x 55 cm Stacking height: 115 cm in Feeder, 100 cm in delivery Performance: max. 4000 sheets/hour Power: approx. 400 tons Counter: 13.4 million 3x Chases Machine in very good condition

Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product

Incl. matching workshop drawer cabinet with punches and accessories. Attention: the machine can be transported on a standard truck! Additional technical specifications: • Cutting force: 150 kN • max. stroke: 340 rpm • largest standard round tool: diameter 38 mm • largest standard square tool: edge length 25.4 mm • max. positioning speed axis parallel simultaneous X + Y axis: 40 m/min • max. rotation speed rotatable tools: 360°/sec • Number of tables / table dimensions: 2 x 1130 x 1000 mm

With foot switch

Tischabmessungen: ca. 1000 x 500 mm

SACMI lining machine for aluminum caps 28x15.4. The line is without chiller, but in fully working condition.

Lining machine for aluminum ROPP caps.

Eccentric press with installed tool for 82mm twist off jar caps. Automatic feeder

Equipped with infeed section with longitudinal direction As well as dies, dies and reducing rings Auction-ID: A1-50251-9

Punching Shearing Machine Including length stop Manufacturer: Mubea / Muhr & Bender Type: Hydraulic Capacity: 110 tons Cutting plate: 200x26mm, 500x20mm Latch: 85x75x16mm Extension: 510mm Auction-ID: A1-40982-60

Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of Make: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is energized and in use. Operating hours NC hours: 70,305h Beam One Hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser Power: 2700W Working area laser operation approx.: 2585 x 1280 mm Working area punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support Tables Brush Tables CE marking Standard equipment: Sturdy, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 spaces for tools and clamping claws 1 clamping claws Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS High Pressure Cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting ...

Punching and shearing machine Equipped with roller conveyor punch side dimensions approx. 6 meters length Attached roller conveyor 340 cm length with approx. 6 meters length on the scissor side As well as rack with various stamps, dies and reducing rings Auction-ID: A1-50251-12

Capacity: Ø40x10, Ø 20x20, Ø 28x11m Auction-ID: A1-50076-1014

Angle line 90 degrees: 80x80x8mm, Angle line 45 degrees: 50x50x6mm, Plate: 200x13 or 350x6mm, Hole: 28x10mm. Equipped with: foot pedal and stop system. Auction-ID: A1-50076-472

Aluminum cap press Tool: 31x24 Currently in production, regularly serviced Production capacity: 350 caps per minute

Technical data Manufacturer: BRUDERER AG, Arbon (Switzerland) Model: BSTA 40 Machine Type: Precision Automatic Punching Machine / Heavy Duty Punching Press Year of Make: 1978 Machine number: 4945 Electrical connection: 380 V / 50 Hz Stroke rate: 70 - 500 strokes/min Maximum stroke: 57 mm Feed system: BRUDERER BBV 200/120 or BBV 200/150 suitable Configuration Precision punching machine BRUDERER BSTA 40 Separate control panel Soundproofed Protective Cabin Tool clamping plates installed Mechanical high-performance drive Automatic belt feed prepared Solid machine design for continuous operation Auction-ID: A1-50643-124

Technical data Manufacturer: BRUDERER AG, Switzerland Model: BSTA 50 Machine type: Precision punching machine Year of Make: 1979 Press force: 500 kN (50 t) Tape feed: BRUDERER BBV 202/120 Stroke rate range: 100 to 1200 stroke/min (stroke dependent) Max. stroke: 51 mm Stroke rates: 100-630 stroke/min at 51 mm, 725 at 44 mm, 780 at 38 mm, 850 at 32 mm, 960 at 25 mm, 1100 at 19 mm, 1200 at 16 mm stroke Configuration BRUDERER BBV 202/120 High-Speed Belt Feed Soundproofed Protective Cabin Integrated lighting of the work area Conveyor belt for parts or residual material removal Automatic container changing/stacking system with several collection containers Separate control and operating unit Technical documentation available Description Powerful BRUDERER BSTA 50 precision automatic punching machine for cost-effective high-speed punching of strip materia ...

Technical data Manufacturer: Weingarten Type: HW 50 Year of manufacture: 1971 (Delivered Oct. 1971) Press force: 50 t Max. sheet thickness: 1.5 mm Stroke rate: 75 - 200 strokes/min Plunger stroke: 12 - 80 mm Plunger adjustment: 60 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Connected load: 5 kW Configuration Belt feed unit available Straightener with feed rollers Soundproof booth Control cabinet and control system Lubrication system Auction-ID: A1-50643-127

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 15 tool stations, 2 clamps ⦁ Drives with maintenance free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball tables ⦁ Parts chute 180 x 150 mm ⦁ Swarf bucket Punching head ⦁ Hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Controller based on Bosch PNC-P ⦁ Control panel with 15 TFT color touch screen ⦁ Easy to use ⦁ Online-help ⦁ Diagnostic functions Data transmission ⦁ Integrated USB interface ⦁ RJ 45 network connection Safety ⦁ CE marking ⦁ Light barriers ⦁ Rapid hydraulic shutdown Additional equipment Punc ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 19 tool stations, 2 clamps ⦁ Maintenance free drives ⦁ Repositioning device with programmable presser foot ⦁ Parts chute 500 x 500 mm ⦁ Good parts container ⦁ Chip conveyor ⦁ Automatic shutdown mechanism Cutting head ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Open control system based on BOSCH PNC-B ⦁ Control panel with TFT colour screen 12.0” ⦁ Program management ⦁ Production plan ⦁ On-line help ⦁ Integrated technology data ⦁ Diagnostic functions Programming ⦁ Machine-oriented shopfloor programming Data transmission � ...

Standard configuration Machine ⦁ C-frame ⦁ Coordinate guide ⦁ Linear magazine with 21 spots for clamps and tools ⦁ Hydraulic clamps (3 pieces) ⦁ Drives with maintenance-free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball-fitted tables ⦁ Foot switch for closing clamps ⦁ Part chute ⦁ Part removal flap 500 x 500 mm ⦁ Finished part container ⦁ Chip container ⦁ Ability for retrofitting ToolMaster Linear ⦁ 1st index pin position right hand inner side Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single station tool adapter ⦁ Manually adjustable presser foot force ⦁ Programmable position of the presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Forming ⦁ Stroke rate punch ⦁ Level monitoring of tool lubrication ⦁ On-Demand-Dri ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Linear magazine inclusive four clamps ⦁ Parts flap 500 x 500 mm ⦁ Good parts container ⦁ Ability to retrofit ToolMaster Linear Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ Programmable presser foot ⦁ Stripper position sensor ⦁ Tool length compensation ⦁ On-Demand-Drive ⦁ Punch stroke rate and thread stroke rate counters ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Monitoring of fill level of tapping and tool lubrication Control ⦁ Open controller based on Sinumerik 840D Solutionline ⦁ Control panel with 17 TFT touch screen Data transmission ⦁ USB interface and network connection RJ45 Safety ⦁ CE marking ⦁ Multi-beam light barriers ⦁ Rapid hydraulic shutdown ⦁ Sheet collision detection Addition ...

used Ridgid hand lever punch Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Sheet thickness max. steel 6.3 mm Projection approx. 100 mm 80 Colour blue Weight 25 kg Pressure 80 kN Punching diameter max. D 22 mm Type of drive by hand Dimensions approx. 300 x 400 x 600 (without lever) mm Tool holder (S) Peddinghaus Punching capacity D 18 in 3.5 + D 10 in 6.3 mm

Bobst SP 142-CER – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Speed: up to 8,000 sheets/h Max. cutting force: 550 t Recorded operating hours: 21,834 h Equipment: Automatic sheet feeder Die-cutting and creasing station Stripping station Automatic blanking Reference: PP-60899 Further information on request.

Bobst SP 142 CER MATIC – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Equipment: Automatic sheet feeder and lateral BOBST Centerline system Die-cutting, creasing, stripping and automatic blanking Automatic non-stop delivery and waste extraction Operator platforms and quick cutting-frame change BOBST factory retrofit with upgraded controls and safety equipment Reference: PP-60850 Further information on request.

Bobst / Iberica TR-105 F – Flatbed die cutter Year: 2003 Max. sheet size: 750 × 1,050 mm; Min.: 350 × 400 mm Speed: up to 9,000 sheets/h Corrugated board thickness: up to 3 mm Non-stop arrangement with belt. Reference: PP-56295 Further information on request.

IMG Klett Cobra Express A 12-165 – Automatic flatbed die cutter Year: 2009 Max. sheet size: 1,200 × 1,650 mm; Min.: 450 × 650 mm Max. cutting size: 1,180 × 1,630 mm; max. cutting force: 450 t Mechanical speed: up to 6,000 strokes/h Corrugated board: 1–8 mm; solid board: 1–4.5 mm Cutting-rule height: 23.8 mm Fully automatic machine with quick-change tooling system. Reference: PP-54365 Further information on request.

Iberica JRK105 – Flatbed die cutter with blanking Year: 2001 Max. sheet size: 1,050 × 750 mm; min.: 400 × 350 mm Speed: up to 8,500 sheets/h Cutting force: 300 t Automatic die cutting, stripping station and blanking. Reference: PP-47903 Further information on request.

Auction-ID: A3-46133-2841

Working width approx. 208cm; Electrical stop Auction-ID: A1-50750-34

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Machine 1 – GENKO Radial Drilling Machine Manufacturer: GENKO Version: ATB 20 Machine No.: 75048 Radial/swivel arm drilling machine 8 spindle speeds Speed range: 450–4,500 rpm Speed levels: 450 / 650 / 950 / 1,250 / 1,600 / 2,100 / 3,000 / 4,500 rpm Engine speed: 1,400 rpm Horizontally movable drill head Height-adjustable working unit Drill chuck and manual spindle feed Machine substructure with drawers Machine 2 – KUPER horizontal drilling machine Manufacturer: Heinrich Kuper Horizontally arranged drilling spindle Manual workpiece/table adjustment Adjustment via handwheels and control lever Workpiece hold-down available Woodworking workbench Stationary casting machine version Auction-ID: A1-50370-8020

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

<br><br><br>Still in operation: Yes<br>Available: immediately

Standard equipment; Ready

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

Alu window profiles Punching tool for end hole ventilation 4 stations

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg