cnc punch used for sale

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: In production Location: Deutschland

: : : : Table load:                   200Kg Working area X Axis:          2.535mm Working area Y Axis:          1.280mm Punching force:               22T Maximum sheet thickness:      8mm Turret position:              18 Positioning speed X and Y Axis:90000 / 60000 mm/min. Change speed revolver:        1,5 - 5 Rpm Length:                       6.900 mm  Width:                        5.800 mm  Height:                       2.200 mm  Weight:          &nbs ...

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 500 kN hole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mm no. of strokes: 23 Hub/min throat: 130 mm stroke: 30 mm total power requirement: 3 kW weight of the machine ca.: 295 kg Overall size: 1100x900x1550 mm Standard equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate length: 2525 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/mih no. of strokes: 200 / 400 Hub/min control: MNC 32000 ATC: 22 Pos total power requirement: 7,5 kW weight of the machine ca.: 21,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 28 t punching cross-cut in cmm: 31 in 7 mm round bar steel: 32,0 mm throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32 ltr. work height max.: 1.033 mm total power requirement: 3,0 kW weight of the machine ca.: 553 kg. dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Quick-change punch device up to Ø 31 mm - green series - - built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm - Free: LED lighting in the punching area - swiveling scraper (plates exchangeable) - Various material support tables are available separately - support frame - 2-step foot switch, with double press for grain search function - electrical controls - Infinitely adjustable stroke length and stroke position - Integrated hydraulic unit with oil filling - Performance data apply to a material strength of 450 N / mm² The data for this ad was cr ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 110 to : 4-30 mm punching unit with hydraulic stripper hydraulic material clamps X- und Y- axis on ballscrews,each with servo motor CNC control Omron Flash memory Touchscreen OPTIONAL EQUIPMENT: TRIPLE PUNCHING UNIT: 31/31/31 MM € 4.500,- central punch: 100 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/20 mm lateral punches 75 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/18 mm TRIPLE PUNCHING UNIT: 31/40/31 MM € 5.100,- central punch: 100 % of punching force max. Dm. 40 mm max. thickness 20 mm max. Dm./thickness 40/20 mm lateral punches 60 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness: 31/15 mm triple punching unit with marking station: punching capacity as above max. thickness 20 mm marking force 700 kN max. 10 characters, interchangeable dime ...

pressure: 63 t no. of strokes: 70-420 Hub/min sheet width: 160 mm ram - range of adjustment: 80 mm : 300 mm table surface area: 750x660 mm ram surface: 690x460 mm total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2500x2500x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic full punch for cardboard & plastic Manufacturer - Ruge & Singer Model: 7404 Year: 2010 Location: germany Material Condition - used, little time in use, as the purpose is no longer given. Accessories - tool kits Price: on request

stamp capacity: 2 - 63 mm throat: 110 / 200 mm Various Destaco punching iron, some with accessories: No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data: see picture, price per piece: 150,- No. 3 & 4: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 5: Type 104-200, accessories: 2 punches and 3 dies, technical data: see Picture, price: 350, - No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We  ...

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Peddimax 1002 combi punch/shear/notching with CNC Siemens X amp; Y positioning table for punchstation with CNC MPS pushfeed system gt; 6 meter for auto cutting flat steel (with hydraulic workpiece clamping) with conveyor belt for cut pieces central lubrification Dia x sheetthicknessdia: dia 31 in 25 mm / dia 90 in 10 mm Depth of throat 510 mm Max hole dia. Ø 90 mm Max cutting-thickness in plate: 500 x 20 mm Blade length 510 mm 90°-cut corner 150 x 150 xnbsp; 12 mm 45°-cut corner 100 x 100 x 12 mm Cut to length round/square 50 mm Max material -thickness by notching: 90 x 52 x 13 mm Punching pressure: 100 ton Power needed: 11 kW Length: 1980 mm Depth: 1020 mm Height: 2060 mm Weight: 3 ton

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Capacity: 30 t Number of strokes per/min: 0   Day light: 0 mm Front distance between columns: 0 mm CNC Brand: Siemens CNC Model: 840 D MACH-id    5212 MAKE        FinnPower TYPE          C5 Compact Express YOP            2009 SPECIFICATIONS Table load in kG       200 Kg Working area X Axis      2584 mm Working area Y Axis        1270 mm Working area X Axis with override       5168 mm Punching force      30 T Maximum sheet thickness       8 mm Turret position        20 Auto indexing positions        2 x Multi tool Positioning speed X and Y Axis      10800 mm/min. Change speed revolver      166 Rpm  ...

Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20   CNC Brand: Siemens CNC Model: 810 MACH-id      5198 MAKE          Beyeler Raskin TYPE            RT 210 / 12 YOP              1995 SPECIFICATIONS Table load in kG        400 Kg Working area X Axis        1270 mm Working area Y Axis       1016 mm Working area X Axis with override        2540 mm Punching force        20   T Maximum sheet thickness        6 mm Turret position        20 / 5 BIG Auto indexing positions        5 Positioning speed X and Y Axis       85 mm/min. Change speed revolver  ...

Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20   CNC Brand: Siemens CNC Model: 810 MACH-id     5197 MAKE          Beyeler Raskin TYPE            RT 210 / 12 YOP              1994 SPECIFICATIONS Table load in kG      500 Kg Working area X Axis       1270 mm Working area Y Axis        1016 mm Working area X Axis with override        2540 mm Punching force         20 T Maximum sheet thickness       6 mm Turret position      20 (2 BIG) Auto indexing positions      2 Positioning speed X and Y Axis       85 mm/min. Change speed revolver     40 Rpm Contro ...

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Section Cutting - round bar: 50 mm - square bar: 50 mm - C amp; I profiles: up to 160 mm Notching - rectangular: 52 mm - material thickness: 13 mm Punching - 33 x 20 mm - 30 x 20 mm - 55 x 12 mm - 38 x 15 mm - bending cap: 250 x 20/10 mm Shearing Flatbar - 380 x 20 mm - 480 x 15 mm - angletrim: 120 x 15 mm Angle Cutting - at 90°: 150 x 15 mm - at 45°: 80 x 10 mm Punching pressure: 85 ton Max sheet thickness by punching + nibbling: 33 x 20 mm Max punching dia: 55 x 12 mm Length: 1830 mm Depth: 790 mm Height: 1920 mm Weight: 2620 kg

Specifications: - Pressure capacity 450 KN - perforates e.B. up to 25 mm Ø in steel 15 mm - Stroke infinitely adjustable 0 to 60 mm - Stroke rate approx. 16 to 47 1/min - Projection 760 mm - Installation height 215 mm - Working height 1150 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces of various punches + dies

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

Busch BL + BD30 Year 1997 Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent Unit BD30 all pneumatic revised until leak free after order a few more things will be performed Available failry soon after order

Key data: 23 Siemens, 2565 840 D, 1295

Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52   CNC Brand: Siemens CNC Model: 840 D Table load:                   200Kg Working area X Axis:          2.565mm Working area Y Axis:          1.295mm Punching force:               23T Maximum sheet thickness:      4mm Turret position:              52 Auto indexing positions:      4 Positioning speed X and Y Axis:90.000mm/min. Length:                       7.400 mm  Width:                        5.500 mm  Height:                  ...

Capacity: 0 t Sheet thickness: 0,00 mm Stroke: 0 mm CNC Brand: _Unknown / Other CNC Model: Commander LE 30 keyway width 2 – 70 keyway length 600 bore size 10 – 500 Cutting speed 0 – 15 return speed 0 – 30 Table  Ø:     600mm Table load:   35Kg Ram adjustment:600mm Length:       1.500 mm  Width:        1.100 mm  Height:       1.800 mm  Weight:       2.500 kg 

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,00 mm Positions ATC: 0   OMERA - R 4 / 12 Trimming machine Ø 1200 x 4 mm MACH - ID 6365 Make: OMERA Type: R 4 / 12 YOP: 1990 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Max. workpiece    1200 Ø Maximum sheet thickness    4 mm Length    3.000 mm Width     1.600 mm Height    2.300 mm Weight    2.500 kg  

Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52   CNC Brand: Siemens CNC Model: 840 D MACH-id      5336 MAKE          Finnpower TYPE            E5 Evolution YOP              2000 SPECIFICATIONS Table load in Kg        200 Kg Working area X Axis       2565 mm Working area Y Axis       1295 mm Punching force          23 T Maximum sheet thickness         4 mm Turret position          52 Auto indexing positions      4 Positioning speed X and Y Axis       90.000 mm/min. Control         SIEMENS 840    D incl. Multi tool 24/8 incl. ...

Pressure: 30 t Sheet length: 3000 mm Sheet width: 1500 mm Positions ATC: 0   CNC Brand: Siemens CNC Model: 840 D MACH-id   446 MAKE        Finn Power TYPE          SC 6 Shear Genius YEAR         2003 SPECIFICATIONS Controll         Siemens 840 D Capacity Ø x plate thickness       89 x 8 mm Press force         30 Ton Table size Length x Width          3000 x 1500 mm Working speed         100 M/Min Hydraulic / Mechanical           Hydraulic DIMENSIONS          Length          8000 mm Width            6000 mm Height            ...

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

Pressure: 30 t Sheet length: 1800 mm Sheet width: 0 mm Positions ATC: 0   MACH-id   3716 MAKE      Euromac TYPE        XP 950 / 30 YEAR       1995 SPECIFICATIONS Hydraulic / Mechanical    Hydraulic Capacity Ø x plate thickness   105 mm Cutting lenght    1800 mm Throat   950 mm Press force    30 Ton Table size Length x Width   1800 x 1300 mm  

Pneumatic rotary table press make -No: SCHÜCO type Pneumatic 297 838Fabr. -No: 1293, built in 1992Technical specifications:Press force: 35 kNMax. Operating pressure: 8 barLifting height approx .: 12 mmReceiving opening approx .: 134 mmpossible strokes per minute: see videoExternal dimensions approx .: 800 x 800 x 1400 mmMax. Weight: 150 kgWith- a lot of Schüco punching tools (Photos of all punching tools available)- round plate- underframeused, in very good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make EDEL type punching professional 400 SMachine -No: 2951392 Year 1992Punching force: 40 tWorking area: 1500 x 900 mmTravel depth stop: 450 mmTravel length stop: 750 mmTool size up to: 100 or 135 mmMaterial thickness up to: 12 mmPunching examples: 100 in 3.5 mmor: 30 in 10 mmPunching sequence (about time interval): 1.5 sDimensions L x W x H approx : 1500 x 1500 x 1700 mmWeight approx: 2000 kgWith- several toolslittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punching machine make PEDDINGHAUS type hydraulics 1000 NMachine -No: 4206879484010, year of construction 1984Printing capacity: 100 tStroke infinitely adjustable: 10 - 100 mmStrokes per minute: 80 - 34Projection: 510 mmWorking height: 1074 mmInstallation height: 440 mmpunched: 39 in 20 mmor with optional equipment: 65 in 12 mm: 90 in 8.5 mm: 130 in 6.0 mmOil filling: 150 lRated power: 15 kWWeight approx: 4,4 tExternal dimensions approx L x W x H: 1954 x 1000 x 2250 mmWith- Coordinate template table for workpiecesxa0xa0 up to 500 x 1000 mm- Swivel bracket- Ball support table- a lot of accessoriesused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

Hydraulic punching machine make PEDDINGHAUS type Hydraulik 1000Masch. -No: 4207873785003, year of construction 1985Printing power: 1000 KNStroke infinitely adjustable: 10 - 100 mmNumber of strokes: 34 - 80 1 / minDischarge: 760 mmInstallation height: 500 mmDrive power: 380 V / 15 kWpunches e.g. up to: 31 mm Ø in steel: 25 mmwith special punch saddle e.g. up to: 58 mm Ø in steel: 13 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 e.g. up to: 90 mm Ø in steel: 8.5 mmWeight approx: 3600 kgOutside dimensions approx. W x H x D: 1200 x 2450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Pneumatic punching machine make EDEL type HP 16-600 SBFabr. -No: 20104Punching force: 16 tPunching capacity: 24 in 5 mmor: 40 in 3 mmor: 50 in 2 mmfor tools up to: 70 mmDischarge: 600 mmStamp recording: 24 Drm. x 85Die height: 78 mmRam stroke: 13 mmDistance scraper - die: 6.5 mmAir requirement per punching: 45 NLMachine weight: 600 kgExternal dimensions machine L x W: 300 x 1050 mmUnderframe: 1100 x 560 x 380 mmWith- Steel base- Material support table- Quick change tool setsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,0 mm Positions ATC: 0   SPECIFICATIONS Controll   Conventionel   Hydraulic / Mechanical   Hydraulic Capacity Ø x plate thickness  Ø  6 - 42 mm Cutting lenght   L = 6.000 mm mm DIMENSIONS Length   7000 mm Width  1500 mm Height  1500 mm Tubomat 642 bending centre for processing pipes. You can do also Sawing, Deburring, flaring. Tubomat is belonging to the company Tracto technik who is specialised in tube bending machines like the tubomat and tubobend, tubotron.  

Pressure: 165 t Sheet length: 2070 mm Sheet width: 1280 mm Positions ATC: 0   CNC Brand: _Unknown / Other CNC Model: Trumpf CC 220 SPECIFICATIONS Controll  TRUMPF CC 220 Hydraulic / Mechanical  Hydraulic Capacity Ø x plate thickness   6,4 mm Cutting lenght   X = 2.070 mm Throat  Y = 1.280 mm Press force  165 Kn Ton Working speed  80 / 55 M/Min  

Pressure: 30 t Sheet length: 2500 mm Sheet width: 1250 mm Positions ATC: 0   CNC Brand: Siemens CNC Model: 840 D Make Rainer OC 3 Type OC 3000 Year 2001 Siemens 840 D !Pressure (metric ton) 30 ton = 6 mm Sheet length (mm) X = 2.500 Sheet width (mm)Y = 1.250 Pos ATC Revolver = 20 Pos Brush table Over taking Under power !- 7 x A Station - 5 x B Station - 2 x C Station - 6 x D Station ( 1 x Multi tool 6 x A)

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 600/64, year of construction 1964Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 764/59, built in 1959Press force: 30 tSheet thickness: 1.25 mmStrokes: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 50 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front a.d. Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools