136,647 used machines on RESALE, but how to find them? Machine Search
740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million
Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Range of tools is included in the price
Punching force 45 t. 2 pcs. available from stock (Video under power on request)
Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.
Inv. Num. : 8689 Type: SBL-1050SE Producer: SABRE Created: 1994 Parameters: Maximum format size: 1050 x 750 mm Minimum format size: 400 x 370 mm Maximum workpiece thickness: 0.1-2 mm Impact pressure: 300 t Service ramp dimensions: 3282 x 1740 mm Length: 5573 mm Height: 2025 mm Width: 2111 mm
Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets
gebr. CNC punching press Finn-Power, type F6 SV, year 2005 Press force: 300kN Max. workpiece width: 4061mm Max. workpiece length: 1528mm Max. workpiece thickness: 8mm Max. workpiece weight: 200kg Fast feed X/Y: 80m/min/60m/min Tower head seats: 20 Tower head speed: 30rpm Travel speed: 100m/min Oil tank capacity: 330l Max. operating pressure: 300bar Dimensions X/Y/Z: approx. 5900mm, 6300mm, 2500mm Weight: approx. 13500kg Control: Siemens Sinumerik 840D Table of the machine has been extended. (Without machine housing)
Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.
pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reference ID PP-52393 Category Flatbed Die Cutter Manufacturer Heidelberg Model Promatrix 145CSB Year Built 2018 Color- Impression- Working Hours - Speed-- Max. size 1060 x 1450 mm Min. size 450 x 580 mm Condition Good Location Europe Availability December 2025
Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.
sheet width: 750 mm plate length: 1250 mm plate thickness: 4 mm table surface area: 1600 x 1050 mm no. of strokes: 180 Hub/min max. punching diameter: 105 mm punching pressure: 25 t total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions: 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Bed size 105x 147 cm Pneumatic clutch full working condition Video available
Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke actuation via footswitch Weight: approx. 600 kg
Specifications: • 75 x 53 cm 6 mm Accessories: • PC workstation • DZDV PC TOUCHSCREEN PC 32" 9970460-20 incl. console • SLEEKING System HAK 100/Brother hot foil printer/finishing system Year of construction: 2024 Price: We ask for your binding offer Available from: immediately Terms of delivery: ex site – EXW Wiehl Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.
Die-cutting machine for e.g. slipcases with many die-cutting forms
pressure: t plate thickness: 5 mm sheet width: 40 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2005 Amada EM2510NT Excellent condition 45 stations, 4 indexing No loading system A lot of tools and spares Books
Offered is a Kocher + Beck rotary die cutter/rotary die cutting technology. SKK: scale front stop 5, scale on cylinder 9, 10bar, Mini B (pressure downward): scale front stop 11, scale on cylinder 5, 20bar, Memobox carton: scale front stop 3, scale on cylinder 11, 40bar, Memobox insert: scale front stop 5, scale on cylinder 5 & 2mm, 10bar. Inspection by appointment possible.
IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available
Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Weight: 35 kg Total power requirement: 0 kw Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: AMADA Model: AC-2510 NT Year of Manufacture: 2008 Technical data: Punching force: 200 kN Punching drive: Servo-electric drive Machine frame: Bridge frame Travel range (X x Y): 2500 x 1270 mm Positioning speed (X-axis): 80 m/min Positioning speed (Y-axis): 90 m/min Axis simular velocity: 100 m/min Control: AMNC-F Find more here - .ucymachines/ Contact us at - sales@ucymachines
A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/900mm/1550mm, weight: approx. 300kg. An on-site inspection is possible.
Impressions=0 m, Condition= Very Good , Availability= 2025-12-23, Bobst Speria 106 Sheet Counter: 200 million Maximum format: 740 × 1060 mm Minimum format: 350 x 400 mm Maximum Speed: 7700 sheets/hour Pressure: 260 tons Stripping station CUBE control Centreline system for quick job changes Quick lock stripping frame Micrometric adjustment 1mm thin plate system Electronic sheet travel control Double-action stripping OS pull side lay OOS push side lay Make-ready table - stripping Non-stop delivery
Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm
Equipment: 1 pliers feed right 4 Carriage Units Working Range: Wire thickness range: 0.5 - 2.0 mm Band width: up to 10.0 mm Length of move; up to 100 mm Output: up to 300 rpm
Equipment: 1 piece BIHLER noise protection cabin 1 piece pliers feed right 1 piece eccentric press 70 kN 4 Norma sled units 1 piece narrow sled unit Working Range: Wire thickness range: 0.5 - 3.5 mm Strap width: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button
Punching force: 1000 kN Projection: 760 mm For example, punch a 40 mm hole in 22 mm steel Stroke release via foot switch Quick-change device Range of tools is included in the price 3000 kg
Inv. Num. : 8884 Type: OMATIC 130 DTR Producer: OMES Generated: 2000 Parameters: Compressive force: 30 t Maximum length of sheet metal plate: 4000 mm Maximum blade width: 1500 mm Machine weight: 8700 kg Equipment: Accessories
max. sheet format 1040 x 740 mm, min. 400 x 350 mm, stripping station, centerline, non-stop feeder, non-stop deposit, drawing mark left, sliding mark right, gripper edge separation, raised 41cm, production hours: 25,000, Bobst-Cube control, micrometer adjustment, electric double sheet control, 1 upper die-cutting frame with quick-release fastener, 1 die-cutting plate 4mm, 1 upper stripping frame, 1 lower stripping frame, max. machine speed 7000 sheets/hour, max. punching force 250 tons, Processable materials: paper min. 80g/m², cardboard up to max. 2000g/m², corrugated cardboard up to 4mm. Overhauled, repainted
Mubea Hole Punch Model KL 750 Optima Year of manufacture 1990 fully functional Hebqowr Dk Rjxim Iqsfb Max. punching force 750 kn Triggering stroke via foot switch With very extensive tools, see photos
TECHNICAL DATA: Power consumption: 2.5 kW Working temperature: 470 °C Operating pressure: 5 bar Ideal for use on wood
Punching force: 560 kN For example, punches a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price
RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April
This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine.
This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine.
Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.
This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.
Hydr. 25 ton plate punching machine with sliding head Work area 1600 x 500 mm Weight approx. 1500 kg Height 210 cm
This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.
This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.
Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg
Pressure plate bending hatchet PB-S; suitable for Heidelberg Speedmaster 52-105; Floor-standing device. Plate bender axe PB-S; used for Heidelberg Speedmaster 52-105; standing device.
Printing plate bending HD/Nela SM 102 B; suitable for Heidelberg Speedmaster SM 52-102; max. Plate length 811mm. Plate bender HD/Nela SM 102 B; used for Heidelberg Speedmaster 52-102: max. plate lenght 811mm.
Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames
Heidelberg OHZ S, age 1956 540x720 mm (21x28") for die-cutting Available: at short term
maximum number of results exceeded
please refine your search
