cnc punch used for sale

Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.

force: 80 ton punching cap: dia 25 x 23 mm / dia 50 x 12 mm stroke: 100 mm depth of throat: 310 mm power: 7,5 HP

The machine was used for punching clay bowls, max. mould dimensions: 200x220mm, pressing force: 6kN, including plastering machine, oiling device and oil tank.

with hydraulic plateclamp for shear Punching cap: 80 ton Dia x sheet thickness: 40 xnbsp; 15 mm / dia 60 x 10 mm Depth of throat: 510 mm Max cutting-thickness in plate: 500 x 20 mm /nbsp;400 x 19 mm Blade length: 510 mm 90°-cut corner: 120 x 120 x 13 mm 45°-cut corner: 90 x 90 x 10 mm Cut to length round: 45 mm Cut to length square: 40 mm Max material thickness by notching: 90 x 10 x 13 mm

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Offer 22526 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Format: 570x820mm, an inspection is possible.

Format: 1000x700mm, an inspection is possible.

There are two identical machines available, format: 570x770mm, an inspection is possible.

Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool

Working width: 25-210mm, embossing force: 100kN, heating output: 2200W.

Size: A4

Table load:                      150 Working area X Axis:             1300mm Working area Y Axis:             1300mm Working area X Axis with override:10000mm Punching force:                  30T Maximum sheet thickness:         0,6 - 8mm Auto indexing positions:         1 Length:                          2240mm Width:                           3630mm Height:                          2500mm Weight:                    ...

Gebr. SCHLEICHER mitre punch mechanical foot actuation Table support left + right Weight: approx. 50 kg from location

AMADA EM 2510 NT Turret punching (year 2012) AC servo Direct twin drive Punching hours: 14271 h Machine on hours: 29580 h Excellent maintenance Punching force: 200 kN Work field: 1270 x 2500mm With replacement: 1270 x 5000mm Thickness max. of the material: 3.2mm ( ST-400N/mm2 ) Maximum material thickness: 3.2 mm. (brush table) Swan neck: 1,310mm Max weight of the piece: 50kg (F4) 150kg (F1) X-axis feedrate: 100m/min Y-axis feedrate: 80m/min Control: Amada AMNC-PC RS-232C serial interface Simultaneous axes speed: 128m/min Turret traverse speed (bidirectional): 30 1/min Max cadence punching with dies VACUUM” (hit rate): 500/min (5mm stroke, 25.4mm pitch) 780/min (5mm stroke, 1mm pitch) 1800/min (1.4mm stroke, 0.5mm pitch) Stroke length: 36 mm. Punching accuracy: ±0.07mm C axis speed: 60 rpm Stations: 45 of them 4 AMADEX Diameter max. tool: 114.3mm Tool change  ...

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!

Hydro press, punching frame for the use of punching units JOKA type HP-S Hydraulic punching machine, hydraulic press for punching bracket Year of construction approx. 1995 Pressure capacity 5 ton. Projection 155 mm Stroke approx. 20 mm Punching unit width max. 54 mm Punching unit height max. 220 mm Die holder 48 mm Motor power 1.5 kW Mains connection 230 volts, 50 Hz - for the universal use of punching units JOKA SW 20 or SWD 20- Projection of the punching units can be larger, can be pushed through to the rear- Stroke release via electric two-hand operation - Hydraulic power unit HAWE, type HCW 4 / 2.5-B 1/400-1 - on frame base, mobile space requirement L x W x H 1100 x 800 x 1450 mm weight approx. 200 kg good condition; used

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Tartellette machine / floor punching machine Peerless Model: OMatic Floor-standing machine with 5 moulds Machine with adjustable step heating for punching head. For molds: Upper diameter: 120 mm Bottom diameter: 115 mm Height: 20 mm Mass: Width: 800 mm Depth: 800 mm Height: 1900 mm Condition: very good, mechanically tested, ex service

Inv. Num. : 6731 Type: CX 1000/30 Producer: EUROMAC Created: 1999 Parameters: Compressive force: 30 t Maximum lifting speed: 200 mm/s Feed length X-axis: 2000 mm Feed length Y-axis: 1000 mm Stroke: 60 mm Machine height: 1800 mm Machine length: 4000 mm Machine width: 2800 mm Machine weight: 5250 kg

5369 – HYDRAULIC SHEET METAL PUNCHING DEVICE With space for 9 hydraulic tools Manufacturer: ENDI Engineering Kft Type: LBS-20 Year of construction: 2004 Operating pressure: 200 bar Voltage: 380V Electrical power: 1.5 kW Weight: 378 kg

Heidelberg KSB, Year 1964 400x570 mm (15.7x22.5") Standard used for die-cutting Available: at short term

Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used

Table punching machine Renz DTP 340; good condition; cleaned and tested; Tool 2:1 rectangular 5.5x3.5mm; Format max.340mm; Punching thickness max.3.5mm. Desktop punching machine Renz DTP 340; good condition; cleaned and checked; tool 2:1 oblong 5.5x3.5mm; size max.340mm; Punching Thikness max.3,5mm.

Punching machine, MAWA model Compact 750. In good condition. Rated power: 41kVA Nominal voltage: 400V Control voltage: DC24 V Circuit diagram E-15207 Rated current: 60 A Input fuse: 63 A Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department  ...

5018 – PNEUMATIC PRESS, PUNCHING, FERRULE DEVICE Manafacture: Sepalumic Model No.: ZA00069 SH0011B Dimensions: 900 x 350 x 1 100 mm Operating pressure: 6 bar

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Heidelberg KSB, Year 1969 400x570 mm (15.7x22.5") used for die-cutting Standard Available: at short term

Multifunctional punch, punch, hole punch, pneumatic hole punch -Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 170 kg

Hydraulic power unit, universal power unit, with tank and punching device HOVEN HYDRAULIK AL13 74.6-1.1 p: 180 bar Engine: BAUKNECHT RF90S/4-7 1,1 kW 1400 rpm 220 / 380 V 3AC 50 Hz Tank: approx. 10 l Punching device: Stroke: 12 mm Punching cylinder: HAWE HSE 16-12 Projection: 35 mm hose length: approx. 3.8 m used, tested ! Dimensions: 550 x 380 x 480 mm

Multifunction punch Schüko No. 396346 Year: 1996 Air pressure: 8 bar Air consumption: NI 18 l/min Dimensions: 700 x 300 x 1000 mm

Punched tape reader GHIELMETTI GmbH FER 204A-S2-5 Order number: X49.090.004.00 BOSCH - Number: 050823-102 Reader: FER 204A.1062.01/02 Winder: S2-5 1/4.00921.00/01 Coil diameter: Ø 152 mm 220 V AC 50 Hz for front panel installation New, with documents ! Dimensions ( punched tape reader, without coils ): 483 x 200 x 132 mm Dimensions ( packaging ): 620 x 300 x 340 mm

Punched tape reader NISA CONSUL EC6121 337.601A AK 25316 Coil diameter: Ø 163 mm 150 VA 220 V AC 50 Hz for front panel installation used, tested ! Dimensions ( punched tape reader ): 480 x 200 x 370 mm Dimensions ( packaging ): 570 x 450 x 300 mm

Punch attachment unit, pneumatic slag unit BORRIES BM12-PN Impact force: 2 - 6 kN Tool shank: Ø 6 / 25 stroke: 232 / 50 / 80 mm rod diameter Ø 25 mm pmax.: 5 bar used, tested ! Dimensions: 305 x 65 x 90 mm

Long punch, punch, hand lever punch SYKON 2859 punching tool: Ø 5,5 x 60 mm / 2x Ø 5.5 mm punching stroke: 20 mm projection ( without table ): 55 mm distance table hold-down: 5 mm Table surface: 125 x 64 mm used, tested ! Dimensions: 200 x 145 x 1030 mm

Pressing and punching device, hydraulic PAGUS pressing force: 12 t ( 1200 kg ) usable stroke of the hydraulic jack: 45 max. stroke of the spindle: 80 mm Hydraulic lifter: type KX12-1B hydraulic stroke: max 190 mm used, tested ! dimensions ( ready for use ): 600 x 420 x 730 mm

Sealing punch Deventer (Ref. No. 160-2665) for window seals Cutting width 30 mm L x W x H: 150 x 250 x 200 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Inv. Num. : 6885 Type: C5 Producer: FINN POWER Created: 2007 Parameters: Compressive force: 300 kN Maximum length of the sheet plate: 3000 mm Maximum blade width: 1500 mm Max. sheet thickness: 8 mm Machine height: 2200 mm Machine length: 5570 mm Machine width: 5165 mm Machine weight: 13000 kg

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

Stock Number: 3819 Profile Steel Shears - Hole Punching Machine Manufacturer: MUBEA, Type: KBLH 550 Machine NO.: 0157887125599, Year of manufacture: 0 Specifications: Gr. Druckl 50 To Max. hole punching dia. 30 x 15 mm Stroke length 0-60 mm Projection 410 mm Flat steel 400 x 10 / 180 x 20 mm Angle steel 50 mm Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

HEIDELBERG OHT SNR: 133501N YEAR: 1961 SIZE: 26 X 38 CM EQUIPMENT: CHASES (2) - HEIDELBERG PRINT-AUTOPLATEN - SHEET FORMATS MIN 40X70MM / MAX 260X380MM - PRINT-/ CUTTING FORMAT MAX 260X350MM - MAX SPEED = 5.500 SPH - EQUIPPED WITH INK UNIT - OIL DRIP TRAY - WEIGHT = 1.100 KG - W168 X D124 X H158CM - 380V/400V - 50HZ - 1.3 KW

cutting and hot foil stamping machine NB of Heating Zones: 6 NB of Pull Programs: 3

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

ROTOFLEX VLI 330 Punching, winding and packaging machine in top condition Completely overhauled. Spare parts warranty Includes 13 magnetic cylinders Warranty

380 V working width: 800 mm

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 32900 € : 1 : 30 to : 1250+N x 1000 mm mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2800 mm : 2800 mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/ ...

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg