cnc punch used for sale

Hydraulic punching machine for holes / beans, type: hls-55 metallkraft 2008. The machine is in very good technical condition - like new. - pressure 55 tons - max diameter of punched holes fi 40x10mm, fi 20x20mm - engine power 5.5 kW - weight 1300 kg We add several sets to the machine. punches and dies for cutting holes / beans.

Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent Unit BD30 all pneumatic revised until leak free after order a few more things will be performed Available failry soon after order

Automatic punching machine double stand Pressure 125 ton Stroke 10 - 80 mm Stroke rate 50-300 1/min Stand width 1180 mm Table area 1150 x 850 mm Continuous opening in the table 1000 x 220 mm Plunger area 1210 x 550 mm Plunger adjustment 100 mm Material width feed 350 mm Material thickness - 6 mm Punching system incl. Feed Model RS 350 SL Levelers Kohler Reel

very well preserved automatic machine with/without motor reel

Specifications: - Pressure capacity at 10 bar 35 KN - Ram stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air intake 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Machine base - Pressure gauge + pressure regulator - SCHÜCO tools 283073 , 293901 ,293902 , 296162 , 296168 , 296199 , 297755

Muhr & Bender KBL 65-30 Optima B profile punching machine Type KBL 65-30 Year of construction 1975 Central lubrication Electrical triggering of the movement via foot pedal 5 tool stations Stop for long material Punch Punch 30mm in 17mm 24mm in 21mm Quick-change device for stamps Profile scissors 1. Z-profile 90° 140mm 2. Angle iron 90° 130x12mm 3. Square aisles 50mm 4. Round iron 55mm 6. T-iron 180mm 7. U-iron 90° 180mm 8. T-iron 90° 100mm Bar steel shears for material 45kp mm² strength 1. Flat iron up to max 60x28mm or 120x18mm 2. Angle iron 80x10mm 3. Square aisles 40mm 4. Round iron 45mm 6. T-iron 80x10mm 7. U-iron 100mm 8. T-iron 100mm Plate shears 1. with knife 13° = 13mm 2. with knife 2.5°= 140x9mm / 220x8mm 3. with knife 5° = 140x13mm / 220x12mm 3 phase current.- Frequency 50 Hz / 4 ...

The Vierwerke Rapida RDC 106 rotary die-cutter can be configured in different variants to carry out different processes – punching, creasing, perforating, embossing Format max. 740 x 1060 mm Format min. 340 x 480 mm Material thickness from 0.03 to 0.6 mm (grammage 60-450 g/m2) The maximum mechanical capacity is 15,000 sheets/h. Equipment: • Magnetic cylinder in each punching unit to which the dies are fixed • Drivetronic SIS and a camera system to control the sheet guidance in the feeder and in the delivery. • Automatic punch pressure adjustment accuracy of 1 μm, separated for each side • Fast, tool-free change of dies - "Click&Cut" system, set-up times – up to 5 minutes for repeat jobs. • Dynamic arch brake and anti-static system

TABLE PLATE PUNCH G2.090.9041/018 FOR SM 52 M. No.: 759/15

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

Details Name Bost SP 142-ER ID PP-28816 Category Flatbed The Cutters Manufacturer Bobst Model SP 142-ER Year 1979 Speed 6000 sheets/h size 1420x1020 mm Min. Size 700x500 mm Condition Good Location Europe Availability Immediately Description • Double stripping • Cutting force 600 t • Working hours: 53000

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...

with CNC X amp; Y positioning table for punchstation equipped with 3 punching units which can be selected with the CNC control Fagor Electric backgauge for flat shear Punching cap: 100 ton Dia x sheet thickness: 31 x 26 mm / dia 100 x 8 mm 28 strokes/min Depth of throat: 610 mm Max hole dia: Ø 100 mm Max cutting-thickness in plate: 600 x 15 mm /nbsp;400 x 20 mm Blade length: 605 mm 90°-cut corner: 152 x 152 x 13 mm 45°-cut corner: 70 x 70 x 7 mm Cut to length round/square: 50 mm Max material thickness by notching: 90 x 52 x 13 mm Power: 9 kW Weight: 3,3 ton

Enko ES 1800 ST Year: 2009 TECHNICAL SPECIFICATION Suitable for the following Materials Solid board : up to 300 g/m² Corrugated and laminated corrugated : 0.5 - 12 mm Cabability specifications: Sheet size : max. 1800 x 1300 mm Min. 800 x 700 mm Cutting pressure : max. (450 t) 4.5 Maximum number of strokes :max. 3000 s/h Dimensions and Weights : Length of machine : approx. 6300 mm Width of machine : approx. 3200 mm Height of machine : approx. 2150 mm Weight of machine : aprox. 24 t Pile height Feeder : max 1200 mm Delivery : max. 1160 mm Technical Data Gripper edge margin, adjustable from : 10 - 18 mm Cutting knife height: 23.8 mm Wood front edge: 27 mm Electrical connected load: 48 KW Electrical supply: 3 Ph 400 V 50 Hz Compressed air required: 6 bar (kg/m²)

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

Technology Italiana Tecnotransfer 15 SR punching machine year 2004

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Register punch Hunkeler RE 320, Photocells Working width 42cm+ Machine number 4763-20, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Punching force 80 tons punching capacity Ø 25 x 23mm Diameter x thickness Ø 50 x 12mm Projection 310mm stroke length 100mm Stroke rate at 20mm 28 / minute Table size 700 x 500mm Working height 1050mm Motor power 5.6kW Model weight 1960kg Dimensions LxWxH 1280x865x1980mm

Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

ALP Used pipe punching machine. Year of manufacture 1996.

offer 22273 Specifications: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - Weight approx. 70 kg - with: - Foot switch - Machine base mobile W 600 x H 830 mm - Various tools HUECK

M. No.: 1683/22

Format max: 92 x 130 cm Format min: 45 x 58 cm max. machine speed 7000 sheets/hour max. pressure 500 tons apporx. 60 cm raised - pull guide at the left side - setting frame - cutting plate - diverse pins and bars

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 3 clamps ? Maintenance free drives ? Repositioning device with programmable presser foot ? Parts chute 500 x 500 mm ? Good parts container ? Swarf bucket Cutting head ? Hydraulic punching head ? Single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Open control system based on BOSCH ? Control panel with TFT colour screen 12.0? ? Program management ? Online-help ? Integrated technology data ? Diagnostic functions ? Teleservice Programming ? Machine-oriented shopfloor programming Data transmission ? Disc drive and network connection Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Mul ...

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine with 17 tool stations, 2 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Parts chute 180 x 150 mm ? Swarf bucket ? Punching head ? Hydraulic punching head ? Rotatable single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Controller based on Bosch PNC-P ? Control panel with 15 TFT color touch screen ? Easy to use ? Online-help ? Integrated USB interface ? RJ 45 network connection ? Diagnostic functions Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Multitool ? Function MultiShear ? Function Roller Technology ?  ...

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 18 tool stations, automatic tool changer, 3 clamps ? Automatic parts chute 500 x 500 mm ? Parts container ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools, automatic tool length compensation, spray tool lubrication, 2nd lubricant container, programmable stripper movement, vacuum slug removal, swarf bucket ? Control: 32 bit microprocessor control TRUMAGRAPH CC 220 S, 10.4 color screen, programmable logic controller, easy to use, diagnostic functions, graphic programming TRUMAGRAPH, integrated 3.5 disk drive, RJ45 network connection ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? Function MultiTool ? Pneumatic repositioning  ...

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps ? Drives: Maintenance-free, digital three-phase servo motors ? Punching head: Hydraulic system with closed control loop, single tool adapter, 360? rotation of all tools ? Automatic repositioning device with programmable presser foot ? Vacuum slug removal ? Swarf bucket ? Brush tables ? Parts chute 200 x 200 mm and sorting of parts into 2 containers ? 2 parts containers ? Controller BOSCH Type 3, activity-oriented user interface, Online help, diagnostic functions, 3.5 disk drive, BNC/RJ45 connection, TFT color screen 10.4 ? Graphic programming ToPs 2000 ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? MultitShear ? MultiBend ? SoftPunch ? Table extension ? Start post

Length minimum: 2500 mm Length maximum: 5000 mm Capacity round: 1270 mm Capacity square: 1270 mm Thickness maximum: 6 mm LKI 250 loading arm PR 250 un-loading arm Storage Tower    Table load:                      150 Working area X Axis:             2500mm Working area Y Axis:             1270mm Working area X Axis with override:5000mm Punching force:                  20T Maximum sheet thickness:         6,4mm Turret position:                 31 Auto indexing positions:         3 Positioning speed X and Y Axis:  128.000mm/min. Change speed revolver:          &nbs ...

Pressure: 0 t Sheet length: 150 mm Sheet width: 200 mm Positions ATC: 0   Minimum tool diameter 2 mm Maximum tool diameter 160 mm Maximum grinding depth 0.99/cycle Grinding rate 0.03 to 0.06 mm/Min Power 1.5 kW FAST, EASY AUTOMATIC TOOL GRINDING All punch press operators know how important tool maintenance is to part quality and tool life. Automatic tool can give a superior quality and process stability, considerably reducing maintenance times. TOGU-EU automatic tool sharpener has been specially designed for high quality sharpening of sheet metal tools. With fast and reliable sharpening of all standard tools, it allows their optimal repair and guarantees to always produce high quality parts. Unlike traditional grinding machines, the TOGU-EU range can minimise the amount of material removed during grinding, preventing the tool from overheating and extending its life time.  ...

Geka Hydracrop 110/SD punching machine Selling due to need for space Ask us for anything

Mitre punch

Standard

UNDER POWER IN PRODUCTION LINE. VERY GOOD CONDITION video available inspection possible Power in tons 22T Metal length 2500 mm Metal width 1250 mm

AIDA A-SF-7000S (40 ton) press year `2005 for sale. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

The notching machine is in used condition and is fully functional. Ideal for the production of round or square air ducts. - Incl. substructure table with castors - Pneumat. Actuation via foot switch Condition see pictures. Visit and demonstration possible. The indicated price is a net price for collection ex works. A chargeable transport within Germany can be organized on request.

This Trumpf Trumatic 500R Punching machine was manufactured in the year 2000 in Germany and has 36200 production hours. It is equipped with a Bosh control unit. The machine has a punching force of 220 kN.

This FMS LINE AMADA Punching machine was manufactured in the year 2001. It is equipped with a Fanuc Series 18-P control unit.

This Durma RP9 1250x20 punching machine was made in the year 2007 in Turkey. It is equipped with a Siemens 840 control unit. The machine has a punching force of 200 kN. Set of tools included.

This LVD Strippit Global 30 1525 Punching machine was manufactured in the year 2006 in the United States. It is equipped with a Fanuc Series 180i- PB control unit. The machine has a punching force of 300 kN.

This Boschert Twin 1000 Index Punching machine was manufactured in the year 2004 in Germany. It is equipped with a Boschert CNC 32050 control unit and has 2 axis. The machine has a punching force of 280 kN.

This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN.

This ERMAKSAN RPP 12730 Punching machine was manufactured in the year 2009 in Turkey. It has 2 axis. The machine has a punching force of 300 kN.

This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN.

This Lvd Global 20 Strippit0 Punching machine was manufactured in the year 2003.

This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN.

This DANOBAT PGA-1 punching machine was made in the year 2000. The machine has a punching force of 300 kN and sheet metal dimensions of 1500 x 3000 mm.

This Italian Technology Tecnumeric 30 C.S.M. 1000 Punching machine was manufactured in the year 2005. It is equipped with a Tecnology Italiana control unit. The machine has a punching force of 300 kN.