132,173 used machines on RESALE, but how to find them? Machine Search
Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.
used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg
Pressure regulator intermediate plate -Type: LR-ZP-A/B-D2 35428 -From: 0 bar to: 12 bar -Price: per piece -Quantity: 8x Available -Weight: 2 kg
Hydraulic pressure switch -Type: TGL10952 -Adjustable: from 0 to 320 bar -Price: per piece -Number: 9 available -Weight: 0.5 kg
Key data: 400 t, 800 mm
Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...
Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg
5/2 Pressure Booster -Type: DPA-40-10 537273 -VN: 43 -1: 2.5-8 bar 2: 4.5-10 bar -Weight: 1.5 kg
Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Price: per piece -Quantity: 2 available -Weight: 2 kg/piece
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1100-050-1-009 -Pressure: 25 bar -Operating voltage: 24 VDC -Signal output: 0-5 VDC -Weight: 0.3 kg
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.
Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1691-NC-016-000 -Pressure: 16 bar -Operating voltage: 24-20 VDC -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg
Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available -Weight: 0.2 kg
Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.
Pressure switch -Type: C6045D 1043 -0.2-3 mbar -220/240 VAC 50 Hz 12(2) A -Pmax: 100 mbar -Protection class: IP 40 -Quantity: 3 pieces available -Price: per piece -Weight: 1.2 kg/piece
High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.37 kW -Performance data: not available -Connection input: Ø 65 mm -Connection output: Ø 60 mm -Dimensions: 510/480/H470 mm -Weight: 49 kg
FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...
ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...
NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...
Presto CC 30 V baler, built in 2006, in the pipeline Technical data: Manufacturer: Presto Type: CC 30 V Year of Make: 2006 Pressing force: 30 t Cycle time: 34 s Drive power: 11 kW Filling opening: 1080 x 950 mm Filling volume: 0.69 m³ Binding: 4-fold, automatic Throughput at bulk density of 35 kg/m³ - 2.0 t 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale dimensions: 700 x 950 mm Bale weight: up to 350 kg Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine weight: approx. 3900 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...
Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!
LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...
echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer
pressure: 30 t stroke: 170 mm column daylight: 600 mm Frame Width: 200 mm distance spindle /table: max. 700 mm weight of the machine ca.: 200 kg Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 t stroke: 400 mm column daylight: 1500 mm Frame Width: 550 mm distance spindle /table: max. 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on ...
ZTS KOSICE LEK 160 eccentric press was built in 1984 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is used in cold metal forming. It is capable of performing operations such as precise punching, stamping and bending. All these machining processes are performed with a high press force of 160 tonnes, which, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 32 and 50 strokes per minute and its stroke is adjustable in the range from 25 mm to 160 mm. The ZTS KOSICE LEK 160 is also distinguished by its very rigid C-shaped design, which offers excellent process stability during even the most intensive challenges. The work table with a length of 1000 mm and a width of 740 mm enables mounting of both larger workpieces and tools. All this makes the offered LEK 160 eccentric press an excellent choice for the producti ...
Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW
maximum number of results exceeded
please refine your search
50 € 
