129,522 used machines on RESALE, but how to find them? Machine Search
Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight: 626100 kg
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
The blower is installed in a soundproofing hood with basic frame, safety valve, recop flap and attachments. The drive engine can be designed according to customer specifications. The compressor stage is completely outdated. You can also only purchase the GM 10 S level. If you have any questions, please call.
Double pneumatic table press Bosch brand Built in 1983 maximum pressure 18 kN maximum stroke: 70 mm maximum operating pressure 5 bar Two-handed actuation knob Table made of aluminium profiles Condition used
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.
Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos
TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device ...
Saw motors with flanges 2 pieces brand new 2 pieces used, re-edited in 2012 1.5 kW Flat rate for 4 engines EUR 360.00 The engines are in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Agitator 0.25 KW with aluminium propeller 300 mm With traverse made of aluminium profiles 45 45 mm. Used electric motor 0.25 KW, 3 x 230/400 Volt, n = 1375 rpm, Weight approx. 15 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid coupling made of stainless steel 1.4571. Stirring organ: Two-wing aluminum propeller d = 300 mm.
JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.
consisting of: Filler Cimec America with 24 filling valves, with double pre-evacuation Crowner Arol Esse with 4 closing heads
Machine type: Hose press / pneumatic Manufacturer: Peters Type: NDP YOC 2000 Condition: used / good Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-PET-0124 DESCRIPTION We offer you a used hose press from the manufacturer Peters. Data to follow. Heavy-duty design Pressure 8 bar Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...
BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...
consisting of: 12-head rinser 12-head long-tube beer filler 4-head crown corker capacity: 2200 bph
McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...
Supply system for sliding ring seals / pressure tank 12L Manufacturer: Fluiten Material: Stainless steel (1.4301) Built: 2000 Volume: 12 L Pressure (max): 16 bar Temperature (max): 99 °C Height: 430 mm (without gauge) Diameter: 219 mm incl. thermometer, gauge and sight glass Condition: new and unused Connections: see drawing Item can be inspected at any time in 76694 Forest by arrangement.
automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures
McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)
McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.
automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.
McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.
Machine Name: Chamber Filter Press Manufacturer: Passavant Type: AX 1200 Year of construction: 1990 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 1800 litres (expandable to 2500 litres) Expiration: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number of plates: 51 (expandable to 70) Panel material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Tech. Documentation: Yes Note: Available mid-February 2024 Accessories: A hydraulic system, a light barrier, a high-pressure pump Condition: Used Price: On request
As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.
Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm
Measuring instrument for flow rate measurement via differential pressure Manufacturer Endress + Hauser EH Type Deltabar S MWP 160bar Delta P -100 ... 100 mbar 4 ... 20 mA HART Bconx8hxqp Multiple existing
Running bezel of a hamlet E110 The bezel is almost unsubstonible
PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...
Pressing length: 3200 mm Pressing height: 2000 mm Functional principle: Hydraulic (horizontal/vertical) Space requirement mm: 3500 x 1200 x H 2750
Dimensions mm: 3200 X 2200 Milling depth mm: 35 Total connection KW: 1.2
Y.O.M.: 2002 Factory No.: 02050057 Power: 500 l/h, motor: 22 kW Pressure: 1000 bar as good as new with manual Dimensions LWH: 1400 x 1000 x 1250 mm Weight: 900 kg
TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos
Machines are still in use. Will be available soon. Pictures and technical data on request.
Rotary tablet press Killian, model T300-32 EU-B Year of construction: 1996 One pair presser rollers respectively for pre-pressure and main pressure. Designed for high press speeds; operated mainly from the front using the hour hand wheels, the controls and via the terminal. Excellent, in full working condition. Technical Information: - Height with hopper: 1852mm (height without hopper: 1692mm) - Machine weight: 1950kg - Max tablet diameter: 16mm - Max fill depth: 16mm - Max output: 240,000 tablets per hour - Max operating pressure 80kN - B type machine – EUR B - 32 stations - Fill System - force feeder Electrical upgrade in 2010 – new PLC and touch screen HMI.
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
Properties: Pressure-free Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 740mm Conveyor width: 655 mm Roll division: 75mm The system consists of 6 segments: 3x 2,250 mm each 3 drive rollers 2x 540mm 1 drive roller each 1x 2775mm 5 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal pr ...
Properties: Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 540mm Conveyor width: 455 mm Roll division: 75mm The system consists of 7 segments: 7x 1,650 with 2 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the roller conveyor can convey sensitive and dif ...
Mechanical high-efficiency automatic press Pressing force: max. 150kN Ejection force: 50kN Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min
used
Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...
Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000
Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price
maximum number of results exceeded
please refine your search
