cnc press brake used for sale

Hydraulic press with a pressing force of 5,000 kN or 500 t. Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Machine No.: 10461 Year of manufacture: 2001 Max. stroke length: 1,300 mm Max. opening: 1,800 mm Min. opening: 500 mm Table size: 2,550 × 2,000 mm Frame passage: 2,570 mm Tool dimensions: 2,200 × 1,800 mm Max. tool weight: 25,000 kg Working speed: 26 / 50 mm/s Rapid traverse speed: 400 mm/s Overrun distance: 97 mm Overrun time: 158 ms Safety distance: 252 mm Drive power: 159 kW Oil capacity: approx. 2,800 liters

pressure: t distance between columns: mm stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

CONTROLS   PLC LAUER SLIDE   total force (nominal): 320 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s COUNTER RAM   nominal force: 63 to   stroke: 30 mm V-RING   nominal force: 100 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 650 mm DECOILER   sheet width max.: 250 mm   sheet width (min): 40 mm   coil weight max.: 1250 to   max. diameter of coil: 1300 mm LEVELLER UNIT   sheet width max.: 250 mm   sheet thickness max.: 5 mm   sheet thickness min.: 0.8 mm   number of leveller rolls: 11   feed velocity min.: 4 m/min   feed velocity max.: 12 m/min STRIP-FEEDER   feeder type: grip feeder   she ...

Ponscapaciteit: 80 ton Diameter x plaatdikte: 31 x 20 mm / diameter 60 x 10 mm / diameter 100 inch 6 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 150 x 150 x 12 mm Hoek van 45° afgesneden: 100 x 100 x 12 mm Rond op lengte gesneden: 50 + 25 mm Op maat gesneden vierkant: 50 + 30 mm Weight: 3 ton

Key data: 100 t

Qty. 1 Second-hand dross press machine – already dismantled and in storage Mfc.: Altek Model 100 with 10 x 181S Pan Sets Built: 2021 Dismantled: 2024 Cycle time for pressing: 6 – 8 min./ pan Capacity: 95 metric tonnes of dross/month 21 days/month = 4.523 mt/day 32 skims/day = 141 kg/skim The pan set dimensions are as follows PANSET MODEL Width Depth Stack-up height Stack-up weight Pan Capacity [MM] [MM] [MM] (kgs) m^3) (kgs) 181S 1016 813 543 1032 0.12 181

High-pressure pumps Dynajet 500 me , NEW, Operating pressure: 500 bar, Flow rate: 15 l/min, Drive: electric 15 kW, 400 volts, Operating hours: approx: 1, Trolly, incl. accessories,

DYNAJET UHP 220 – Demonstration system Pressure: 2,800 bar / approx. 40,000 PSI Flow rate: 27 l/min Year of Make: 2021 Engine hours: approx. 633 hours High-pressure operating hours: approx. 350 hours Engine: Volvo diesel engine, 160 kW Condition: very good, ready for immediate use Included in delivery: 1 × high-pressure gun with lance, 800 mm 1 × omnidirectional nozzle including nozzle holder 1 × rotary nozzle 1 × high-pressure hose, 20 m, with quick-lock connection 1 × control cable, 30 m

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 200 mm dayligth: 425 mm throat: 300 mm working feed: 9.0 mm/sec return speed: 90.0 mm/sec work height max.: 980 mm back stop - adjustable: ca. 700 mm Control: PPS-TS Touch oil volume: 350 l total power requirement: 18.0 kW weight: 12.000 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized bac ...

pressure: 40.0 t chamfer lenght: 1250 mm distance between columns: 890 mm work stroke: 100 mm dayligth: 300 mm column arm: 200 mm table width: 140 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 90.0 mm/sec tank: 63.0 l total power requirement: 3.0 kW weight of the machine ca.: 2000 kg range L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator - 1x mobile control unit The ...

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 8800 € : 169.84 € : 120 to : horizontal verschiebbar : 400 mm : 900 mm : 1200 mm : 5,8 mm/s : 9.5 mm/s : 1200 x 400 mm : 4 kW : 1900 mm : 1000 mm : 2450 mm : 1250 kg with horizontally sliding cylinder motorhydraulic with additional hand pump Height adjustable table Oil Pressure manometer OPTIONS (PRICES ON REQUEST): Handwheel and fixingbolt for cylinderadjustment 1 pair of V-block The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t distance between columns: 600 mm stroke: 600 mm table-size: 3000 x 1500 mm travel x / y: 2200 x 900 mm working feed: 7 mm/sec tank capacity: 66 l working pressure: 30-250 bar total power requirement: 18,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke cont ...

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg

Machine name: Filter press used Manufacturer: Netzsch Type: 800/80 Year of Make: 1998 Plate format: 800 x 800 mm Number of plates: 81 Press capacity: approx. 1200 litres Filter area: Approx. 88 m2 Filter pressure: 15 bar Cake thickness: 30 mm Procedure: Closed Plate Feed: Manual Panel material: Polypropylene Design: Side-spar press Filter Cloth Washer: Yes Filter Cloths: No Empty weight: approx. 7000 kg Tech. Documentation: Yes Accessories: A control cabinet, a hydraulic system, a light barrier, a filter cloth washer, high-pressure pump. Condition: Used Price: On request

Machine name: Chamber filter press used Manufacturer: Diefenbach Type: FP DE800-90 Year of Make: 1997 Plate format: 800 x 800 mm Number of plates: 90 Press capacity: approx. 1350 litres Filter area: Approx. 99 m2 Filter pressure: 15 bar Cake thickness: 30 mm Procedure: Closed Plate Conveyor: Automatic Panel material: Polypropylene Design: Bridge spar press Filter Cloth Washer: No Filter Cloths: No Dimensions: L 8500 x W 1300 x H 2100 mm Empty weight: approx. 8000 kg Tech. Documentation: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Used Price: On request

pressure: 400 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC ModEva 10 S total power requirement: 47 kW weight of the machine ca.: 30.400 kg dimensions of the machine ca.: 6000x3000x3450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Long Shaft Press CH-6-LL Year of construction 1992 max. diameter: 6.5 mm Max. shaft length: 102 mm Max. wire section: 128 mm Output: 110 pieces per minute + Long Shaft Press CH-6-LL Built in 1990 max. diameter: 6.5 mm Max. shaft length: 128 mm Max. wire section: 146 mm Output: 110 pieces per minute Both machines are in good condition

The machine is in good technical condition; it can be tested by prior arrangement.

Max thickness: 12 mm Max dishing radius: R-300 Min plate thickness: 2 mm Length5000 mm Width1600 mm Height2800 mm Weight6000 kg Forming rolls R30/40/50/60/70/80/90/100 Under power good running order Documentation drawings availebel nbsp; nbsp; Bördelmaschine Bördel- und Sickenmaschine Bördel- und Bodenmaschine Bodenbördelmaschine Bodenformmaschine Behälterbodenmaschine Klöpperboden Maschine Klöpperboden Bördelmaschine Klöpperbodenformmaschine Druckbehälterboden Maschine Behälterboden Bördelmaschine Tellerboden Maschine Schüsselboden Maschine Bodenbearbeitungsmaschine Formmaschine für Behälterböden Bördelmaschine für Klöpperböden nbsp; Flanging machine Flanging and dishing machine Flanging amp; dishing machine Dishing machine Dishing and flanging machine Dish end machine Dish head machine Dished head forming machine Dished end forming machine Hea ...

ponsdop: diameter 28 x 15 mm / diameter 38 x 11 mm Snijkap: 200 x 20 mm / 300 x 15 mm Hoekafschuifkap: 90° 120 x 120 x 12 mm / 45° 80 x 8 mm Stalen breekijzerkap: diameter 35 / 40 mm Inkepingskap: 100 x 42 x 10 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: 28 x 15 mm Max punching dia: 110 mm Power needed: 4 kW Length: 1510 mm Depth: 590 mm Height: 1570 mm Weight: 1440 kg

Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

pressure: 170 t chamfer lenght: 3170 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 620 mm stroke: 350 mm ajustment speed: 160 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec oil volume: 280 L 0: 300 bar controlled axis: 7 Anzahl Number of working hours: ca. 51.500 h total power requirement: 16.5 KW weight of the machine ca.: 12700 kg range L-W-H: 4550 x 2650 x 3150 mm LONG STROKE special version Excellent condition () Original price approx. 200.000 Euro Special price on request ---------------------------------------------- LONG STROKE electro-hydraulic press brake featuring: Increased daylight opening (installation height) = 620 mm Increased cylinder stroke = 350 mm ---------------------------------------------- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control AMNC - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) Swiveling control unit - front lef ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hofmann long hole drill Manufacturer: Hofmann Type: LL160 Year: Specifications: Drilling dept.: max. 145 mm Drilling length:.: max. 240 mm Height adjutment: max.135 mm Drilling: Dept limitation stopper Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Power: 1,3 kW Drill clamp:: 5 – 20 mm

pneumatic Book Press Kokkelink BP 40 Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte  / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Presshöhe / Press high max. 350mm Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg

 Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display

Manuelle Blockleimpresse / Manual Block Gluing Press Wilhelm Leos BLP Serial-No. 24054 Pressfläche Breite / Pressarea width max. 420m Einlegetiefe / Insertion Depth max. 500mm Fahrbar auf Rollen / mobile on wheels Blockleimpressen werden für die Blockverleimung in der Weiterverarbeitung von Druckerzeugnissen, z.B. beim Ableimen von Blöcken und  Broschüren eingesetzt.  Papierstapel werden gleichmäßig angepresst und somit eine saubere Verleimung gewährleistet.  Block gluing presses are used for block gluing in the further processing of printed products, e.g., for the gluing of blocks and brochures. Paper stacks are pressed evenly, thus ensuring clean gluing.

Hydraulic Press Tränklein ZP 39 Hydraulische Presse - Hydraulic Press Tränklein ZP 39 Serial-No. 24088 1 Pressplatte / 1 pressure plate Size with max. 520 x 400mm Stapelhöhe / Stack height max. 360mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 400kg

big Hydraulic Press Lechner ST USTIA große Hydraulische Presse - big Hydraulic Press Lechner ST USTIA Baujahr / Year 1980 - Serial-No. 1438 1 Pressplatte / 1 pressure plate Size with max. 800 x 800mm Stapelhöhe / Stack height max. 800mm Druck stufenlos regelbar / Pressure steppless

Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year 03/2002 - Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW

2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included

Tischmodell Blockleimpresse mit Warmluftgebläse / Table Model Block Gluing Press Müro with hot air blower  Blockleimpresse / Block Gluing Press - Müro BLP 5000 Year 2003 - Serial-No. 20/2003 Arbeitsbreite / Working width 350mm Stapelhöhe / Stack height max. 220mm mit Warmluftgebläse / with hot air blower 

2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld<< Year 1969 - Serial-No. 34364 Size max.: 570 x 820mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3 Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

2 Color Offset Press Heidelberg SM 52-2P+ Plus version with Perfecting 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg SM 52-2P+ Baujahr / Year 1997 - Serial-No. 201301 Druckzahl / Impressions 54 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm  Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Perfecting 1/1 - 2/0 CP-Tronic, Autoplate, Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included 

Stanztiegel in einem guten Zustand / Letter Press DIE Cutter in good Condition Stanztiegel / Letter Press DIE Cutter Heidelberg GTS Baujahr / Year 1965 - Serial-No. 62990 Size min. 85 x 102mm - max. 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Stanzleistung / Punching Pressure 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Die elektrische Zwillingspressen eignen sich zum Pressen von Büchern, Broschüren, Plakaten, Bildern etc. The electric twin presses are suitable for pressing books, brochures, posters, pictures, etc. Elektrische Zwillingspresse / Eletric Twin Press Wolk SP Serial-No. 909 Pressdruck / Pressure max. 2500kgs Pressfläche ja Pressplatte / Press Area each Plate 340 x 430mm Pressdruck regelbar / Adjustable pressing pressure

Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition

The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg

Bündelpresse / Bundle Press BMF SK 82 B Baujahr / Year 1968 - Serial-No. 0210 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards.

Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz  /Power 50 Hz 5,5 kW Schallpegel 50 Hz / Noise Level 50 Hz    76…77 dB(A) Gewicht / Weight +/- 95kgs

Digitaldrucker mit FS-612 Broschürenfinisher / Digital Printing Press with Broschure Finishing System Digitaldrucker / Digital Printing Press Konica Minolta Bizhub PRO C1060L Baujahr / Year 2016 - SN. A5VM021003546 Total Counter 137.408 Sheets, Duplex 33.008 Auflösung / Resolution 1.200 x 1.200 dpi x 8 bit Papiergrammatur / Paper grammage 62–300 g/m² Autom. Schön- und Widerdruck / automatic Perfection 62–300 g/m² Papierformate / Paper Sizes 330 x 487mm Maximaler Druckbereich / max. Print Area 323 x 480mm Papiereingabekapazität / Paper Infeed Capacity Standard 1.500 Bögen -  max. 4.250 Bögen Papierausgabekapazität /  Paper Infeed Capacity Broschürenfinisher FS-612 max. 2.500 Bögen Heftfinisher FS-531 max. 3.000Bögen Ausgabefach OT-502: max. 15 Bögen Abmessungen des Basissystems 760 x 903 x 1.072mm Gewicht des Basissystems 291kg

L. 2500 x B. 1300 Bürkle Veneer press 6 Column Cylinder 98 tons of pressure Heating plates Safety line Immediately available

Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

Number of conrods 1 Table dimensions ( x-y/mm) 950 x 660 Slide Dimensions X-Y (mm) 550 x 460 Stroke (mm) 20 - 160 Slide Adjustment (mm) 80 Shut Height (mm) 370 Stroke per minute 70 - 130 Motor Power (kw) 25 Features accessorized with soprem feeder width 400 mm 1250 kgmm Accessories beckoff control Machine Conditions ce marked

Used Hermetic Press/Rotary Table Press for the production of concrete slabs, terrace slabs, pavement slabs, etc. Manufacturer: OCEM Type: OPA650 Overhauled, see photo Including 4 mold sets 2525, 3030, 3333, hexagonal 3030 Price: 105,000 euros ex site Used Hermetic Press/Rotary Table Press for the production of concrete slabs, patio slabs, sidewalk slabs, etc. Manufacturer: OCEM Model: OPA650 Refurbished, see photo Includes 4 mold sets: 25×25, 30×30, 33×33, hexagonal 30×30 Price: 105,000 euros, picked up at location

Description Item # 9387 - COCOA BUTTER PRESS Manufactured by PACKINT Year 2018 capacity 4kg/hr

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50066-355

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50066-239

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50066-262

Offer 26244 Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 400 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Plunger clamping surface 530 x 460 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table bore / breakthrough 180 mm - Table height above floor 700 mm - Oil capacity approx. 300 ltr - Drive 380 V / 11 kW - Space requirement approx. W 1150 x H 3100 x D 1750 mm - Weight approx. 4300 kg