cnc press brake used for sale

1:1 Pressure Converter, Pressure Converter VDO MESS- UND REGELTECNIK GmbH Type: 21 / 16 Best: No. 055834 Supply air pressure: 1.4 - 4.4 bar to Measured value: 4 mbar - 4.0 bar with accessories New ! Dimensions: 78 x 78 x 45 mm

Contact pressure gauge, pressure gauge with switching contact WIKA 212.20.100 Cont. 821.111 0 to 250 bar Ø 100 mm with diaphragm seal (approx. 1500 mm cable) New! Dimensions: 120 x 60 x 55 mm

Pressure transmitter REXROTH HM20-20/250 R901342027 Measuring range: 0 - 250 bar U(signal): 0.1 - 10 V DC U(supply): 18 - 36 V DC used, tested ! Dimensions: 130 x 22 x 20 mm

Pressure transmitter HYDROTECHNIK HT-PD 3403-53-NO.54 Measuring range: 0 - 210 bar U(signal): 0.1 - 10 V DC U(supply): 12 - 32 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Pressure Transmitter, Piezoresistive Pressure Transmitter PMA P21R/120 51863 0413.0250 Measuring range: 0 - 120 bar I(signal): 4 - 20 mA DC U(supply): 8 - 28 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Pressure transmitter, level transmitter HENGESBACH KERAMESS G1/2B 30mbar4/2LF Measuring range: 0 - 100 bar < br /> Pmax: 4 bar I(signal): 4 - 20 mA DC U(supply): 13 - 36 V DC stainless steel ! used, tested ! Dimensions: 160 x 90 x 70 mm

Used screw press made by Italian company Bertuzzi. New 2002. Press application: Citrus juice from the extractors can be pulped to meet customers' pulp content requirements. Helicoidal depulpers model ESM and Super have been designed specifically for refining citrus juice. They take the high-pulp juice from the extractors and gradually squeeze the pulp, producing a low-pulp juice.

Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Specifications Maximum pressure: 100 tons Year of Make: 1995 Pressing force: 82 tons/m² Number of ties: 5 in vertical Channel cross-section: 1100 x 1100 mm Dimensions of the tailgate: 2050 x 1100 mm Power connection: 400 V/ 2 x 55 kW Weight: approx. 36 tons Bale tying: automatic Press capacity under operating conditions: max 1170 m³ / hour Press capacity at idle: max 720 m³ / hour Theoretical throughput: to density 30kg/m³) 22 tons/hour Theoretical throughput: to density 50kg/m³) 28 tons/hour Theoretical throughput: to density 100kg/m³) 42 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably guided on large rollers ...

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

Specifications: - Max. working length 4060 mm - Column passage 3680 mm - Max. pressing force 1700 kN - Max. distance table / plunger 385 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Pressure reducer, pressure regulating valve MANKENBERG 652 G1 6570036TA-EM Temp.: 130°C 2 to 5 bar PN 40/10 stainless steel !' New !' Dimensions: 310 x 145 x 115 mm

Gluing stars Polzer Floor gluing press Type: EVA - 6 E Year of manufacture 1989 6 gluing shelves with 2 special heating plates each Gluing dimension 2100 mm x 1100 mm With Leimangabestation With 2 lifting devices for loading and removing the panels With roller conveyor Workpiece thickness maximum approx. 50 mm For removal, the plate is pneumatically lifted Per floor: 7 pneumatic pressure cylinders 100 mm diameter, 100 mm stroke, compressive force 740 kg per cylinder, Movable pressure plate 250 mm x 40 mm 2 cylinders to operate the upper heating plate Insertion opening 700 mm 2 electric heating plates Each electric heating plate 220/380V, 3 kW, thermostats 0 – 120°C Operating pressure 8 – 10 bar Gluing temperature adjustable, ideally 50-65° Capacity approx. 50 m²/h With protective grille External dimensions approx. 4000 mm x 4000 mm x 3600 mm

Pressure relief valve, relief valve LESER TUEV-SV 95-425 5394.2302 D0 10 D/G 0.36 F 0.26 10 bar G1/2 Material: stainless steel 1.4408 New ! Dimensions: 182 x 72 x 55 mm

Used pressure tank made by Urlinski, type: ZB 50 PF. New 2020. Working capacity: 50 liters Intended use: The ZB 50 PF-type mobile tank, vacuum-tight, designed for hygienic storage and transportation of pharmaceutical and cosmetic products of the second group of liquid classification (safe liquids). Technical data: -TYPE: ZB 50 PF -Working tank capacity: 50 liters, -Total tank capacity: 70 liters, -Grade of steel in contact with the product: 1.4404, -Tank inner diameter: 400 mm, -Fastener sealing material: VMQ, -Capacity: 56 kg, -Height: +/- 1300 mm, -Height with lid open: +/- 1420 mm, -Length: +/- 610 mm, -Length with open lid: +/- 940 mm, -Width: +/- 530 mm, -Drain spigot height from the ground: +/- 300 mm, -Surface area in contact with the product: 0.84 m2.

Pressure Switch MERTIK 612.01 0.1 to 1.85 kp/cm² Switching Capacity(AC): 2.5 A 380 V 50 / 60 Hz Switching Capacity(DC): 0.16 A 220 V IP55 New ! Dimensions: 180 x 55 x 135 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

Screw press, collection container, pre-tank

Manufacturer: Year of Manufacture: Model: WN29/ WPC-ELT-001-0248 Type of Machine: 400 Ton Hydraulic Press - Press Model: 225.400 - Weight (Net): 75,000 Kg - Maximum Force: 4000 KN - Nominal Distance from Bottom Dead Center: 12 mm - Normal Stop Position of Crankshaft: Top Dead Center Tooling and Capacity: - Maximum Tool Dimensions (Height x Width x Depth): 700 x 2500 x 160 mm - Maximum Weight of Upper Tools: 7000 Kg - Maximum Permissible Flywheel Speed: 489 RPM Operational Parameters: - Continuous Stroke Rate (Min/Max): 12 - 30 Strokes/Min - Maximum Clutch Engagements per Minute: 20 Strokes/Min - Maximum Effective Clutch Engagements per Minute: 10 Strokes/Min - Stroke Range (Min/Max): 200 mm - Slider Adjustment Stroke: 300 mm - Maximum Tool Speed (Adjustable Stroke): 700 mm Power and Pneumatics: - Electrical Supply (Voltage/Frequency): 400V / 50Hz - Installed Electrical Power: 4 ...

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Total weight around 43 tons Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Pressing Force: 315 tons Find more here - .ucymachines/ Contact us at - sales@ucymachines

2004 Alphatech Model RPS4000 Description: Electro-hydraulically driven frame press Series: Type:RPS 4000 Date of manufacture:12.2003 plunger force From approx. 4000 kN kN plunger force Up to approx. 916 kN kN plunger stroke approx. 600 mm Installation table - column max. 1050 mm Max. plunger rapid speed approx. 600 mm/sec Max. Splunger working speed approx. 41.7 mm/sec Max. Return speed approx. 440 mm/sec Table surface (WD) approx. 900965 mm Full volume Hydrauliko! HLP 46 approx. 5300 litres Main drive power 290 kW+ 255kW + 130kW Control voltage 230 VAC/ 24VDC Operating voltage 400 V /50 Hz Colour scheme: System RAL 1014 Control cabinet, control panel and hazard labelling RAL 2002 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Liebergeld Li-transmatic Colombo Agostino for sale. Year of build 1990 Model G 400/1100/250/5 Nominal pressing force: 4000 KN Stroke : 250 mm Infinitely variable stroke rate: 20 - 60 1/min Table top usable, width x depth: 1100 x 900 mm Plunger plate usable, width x depth: 1050 x 800 mm Installation height, bottom stroke, top adjustment: 720 mm Vertical adjustability of the ram: 20 mm Table ejector cam-controlled Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

pressure: 40 t stroke: 250 mm total power requirement: 6 kW weight of the machine ca.: 3 t distance between columns: 600/350mm mm table surface area: 860x620 mm ram surface: 860x620 mm table height: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t distance between columns: 1350/1000mm mm stroke: 500 mm weight of the machine ca.: 20 t table surface area: 1900x1600 mm ram surface: 1900x1600 mm table height: 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 7 t throat: 180 mm stroke: 100 mm table surface area: 300x300 mm ram surface: Ø105 mm hole in the table: Ø60 mm table height: 1050 mm tool hole in ram: Ø30 mm total power requirement: kW dimensions of the machine ca.: BxTxH 1200x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • manual back-off turning • upper and lower tool • 2 manual control / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand aluminium extrusion press line Mfc.: TCS, Asimakis, Sistem Teknic Force: 2200 MT Billet dia.: 8” Built: 1979 Still in operation! Type: Hydrauli horizontal Hydraulic pressure: 235 bar Scope of supply: Billet Loader Billet Furnace Hot Shear Billet Transfer Table Extrusion Press Run-Out Table Single Puller Cooling Table Stretcher Profile Stacker Ageing Furnace

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display

Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical Data - Max. Pressing Force: 4000 kN - Max. Return Force: 340 kN - Ram Stroke: 500 mm - Installation Height (Platen/Ram): 1100 mm - Column Clearance (Front/Side): 1200 mm / - - Table Size: 1200 × 800 mm - T-Slots on Table (DIN 650): 22 H11 mm - Table Height: 850 mm - Ram Surface: 1200 × 800 mm² - T-Slots on Ram (DIN 650): 22 H11 mm - Drive Power: 76 kW - Max. Operating Pressure: 290 bar - Control Pressure: 90 bar - Machine Weight: 23000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity

Working width: 120 mm Working height: 1200 mm : 6000 mm Number of cylinders: 12 St. 1 pc. LAMINATION PRESS Type SLV - H - 6.0 - 1.2 - 120 - 6V - II -P -------------------------------------------------------- Technical specifications -------------------------------------------------------- working dimensions: Length: 6000mm Height: 1200mm Gluing thickness: 20 - 120 mm Number of pressure cylinders: 12 pcs. Cylinder type: Ø 63 x 120 mm Max. force per pressure cylinder: 50 kN Specific pressure: 7.5 kg/cm2 Number of hold-down devices: 6 pcs. Cylinder type: Ø 40 x 100 mm Max. force per hold-down device: 20 kN Number of sections: 2 Max. pressure: 160 bar Power: 3.0kW Pump flow: 10L/min Manual control with hydraulic valves every work surface in contact with glue is covered with INOX Materila covered each pressure cylinder and the hold-down device can be locked separately equal pressure in each ...

pressure: 75 t stroke: 250 mm daylight longitudinal/sideways: 800 x 215 mm dayligth: 170 - 885 mm working pressure: 7,5 - 8.5 bar weight of the machine ca.: 0,45 t dimensions: 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified

various pressure zones IMA - from stock - price on request

Briquet press Make: Reinbold Type: RB 30 SV New machine Technische Daten: Reserve container approx. 1044 x 1044 x 1010 mm Hydraulic motor: 5,5 kW Briquett-Ø 50mm Oil quantity: 100 l Weight: Approx. 700 kg The max. material moisture should not exceed 18% Description The whole briquet unit consist of an easy-maintenance hydraulic, a powerful drive for the agitator as well as the the fill and press cylinders. The unit is compact placed on the machine. The accessable construction makes the service easy. Hydraulic unit consists of: motor, pressure switch, valve block, manometer, oil filter Switch box mounted on container, with SPS-Control Automatic Star-Delta-start Low oil switch Screw conveyor channel, screw conveyor Manual cylinder control Automatic end positioning of all cylinders Safety switch for oil temperature Connection for transport hose or c ...

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step max.: 999.99 mm   sheet length min: 1900 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into indivi ...

General Manufacturer: Transmatic Type: TS-3M Year of Make: 2007 Plate size: 38 x 38 cm Maximum pressure: 600 g/cm2 Temperature setting: 50 – 305°C Condition Condition: Used Functional: Tested and fully functional