136,468 used machines on RESALE, but how to find them? Machine Search
380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-50866-362
380V-50Hz; 3PH; Max 60C; 200BAR; 14.0L/min; including spray lance; Auction-ID: A1-50866-506
unused; various accessories; PU tapes; soap container; rated pressure 18.6 MPa; 3509 Auction-ID: A1-50866-62
Working width: 3550 mm Working height: 2550 mm Number of cylinders: 5 St. Hess Quickstep Frame Press ---------------------------------- Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) --------------------------------------- General --------------------------------------- Working width: 3550 mm Working height: 2550 mm - Siemens S7-1200 control system (replaced in 2024) PLC control for automated pressing cycle, (optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints) manual control mode also available - Hydraulic power unit and hoses replaced in 2024 Features: --------------------------------------- > Hydraulic: Yes > Number of vertical pressing cylinders: 3 > Number of horizontal pressing cylinders: 2 > Vertical adjustment method: Electro-hydraulic (long-stroke cylinders) > ...
pressure: 300 t passage width: 2050 mm stroke: 1200 mm total power requirement: 55 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 412.8 € : 150 to : fix : 300 mm : 610 mm : 1520 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2470 mm : 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 30 to : fix : 775 mm : 5 mm/s : 10 mm/s : 1500 mm : 700 mm : 2015 mm : 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-118
HAN10R press container from 2016. The press was only used for paper/cardboard and was not outdoors most of the time. It is therefore in good condition. The press is equipped with an electric swivel lid. At the push of the head, this opens, you throw the waste into the press and press another button. Then the swivel lid closes and the press is started. The two rails in front of the insertion should only prevent the disposal of cardboard boxes that are too large. These can be unscrewed. The entire drum housing can be removed by loosening 8 screws. Then the press can be used normally. The press has published a current UVV of 22.09.2026 We will be happy to answer any further information. The press must be picked up in 58730 Fröndenberg. The sale is exclusively to commercial buyers. The price indicated is a net price (exw).
Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air ...
3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached pictures, all machines were fully serviced as part of the annual UVV inspection. The last inspection took place for all plants in the summer of 2026. The machines are currently still in ongoing production operation and are fully operational.
Hammelmann HDP 164 Pompe Pression : 2 400 bars Débit : 35 l/min Moteur : Volvo Penta Différents accessoires disponibles : pièces détachées, tuyaux, câbles, arme, etc. Machine toujours entretenue et surveillée Factures d’entretien disponibles Équipement prêt à travailler
Technical data Maximum pressure: 16 tons Power connection: 400V / 4kW Press force: 2.08 kg/cm² Year of Make: 2006 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 150-250 kg Machine is fully functional after technical supervision.
Technical data Maximum pressure: 54 tons Power connection: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of Make: 2004 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Bale tying only with wire Machine is fully functional, after technical inspection and after renovation
Technical data Maximum pressure: 60 tons Power connection: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of Make: 2002-2005 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Machine is fully functional, after technical supervision and after renovation.
Technical data Maximum pressure: 50 tons Power connection: 400V / 4 kW Press force: 5.2 kg/cm² Year of construction: 2013 Bale size: 1200x800x1100 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical inspection and after renovation
Technical data Maximum pressure: 20 tons Power connection: 380V / 2.2kW Pressing force: 2.6 kg/cm² Productivity: approx. 6 bales/hour Bale size: 1100x700x800 mm Price: on request Bale weight: approx. 200 kg Year of Make: 1991 Machine is fully functional, after the technical inspection.Price also includes the paint renovation
Key data: 100 t
Manufacturer: Hidroliksan Model: CFSS 100t Year: 2022 Condition: Used Stock number: 9614 Operating hours: 800 h Compressive force: 100 t Table length: 800 mm Table width: 500 mm Stroke: 400 mm Machine height: 2930 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 6000 kg
Auction-ID: A1-50846-312
• Lot of 4 manual die press • Piston diameter approx, 38 mm Auction-ID: A7-50834-617
Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800
Maximum permissible pressure: 3.0 bar / 0 bar and 0 / –1 bar, Permissible temperature: 0 °C to +40 °C, Test pressure: 3.3 bar, Test medium: compressed air. Auction-ID: A1-50340-81
Auction-ID: A1-50777-1067
General Description High-speed mechanical stamping press manufactured by JELŠINGRAD under licence from Hermann Raster KG, Germany, model BPA-75 . Heavy-duty press designed for high-volume progressive-die stamping, punching and blanking from coil. Technical Details Manufacturer: JELŠINGRAD Model: BPA-75 Year: 1985 Serial number: 8510917 Nominal pressing force: 750 kN / 75 t Stroke rate: Infinitely variable 120–600 strokes/min Ram stroke: 10 / 50 mm Working hrs: aprox. 13000 Ram adjustment: 80 mm Maximum daylight: 400 mm Table: 1,250 × 750 mm Distance between uprights: 730 × 620 mm Maximum strip width: 300 mm Strip feed height: 100–130 mm Feed length per stroke: 5–15 mm Motor power: 15 kW Power supply: 3 × 380 V, 50 Hz Air clutch and brake Compatible with pneumatic strip feeding equipment, which is installed on machine Electrical cabinet and controls inc ...
- Strength 2700 kg. - Pedal actuation. - The table on which it is resting and a manual rectangular hole punch are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-611
1000ml capacity 5 bar design pressure 50°C design temperature Auction-ID: A1-50846-52
1000ml capacity 5 bar design pressure 50°C design temperature Auction-ID: A1-50846-51
Electrically driven hydraulic unit on box with wheels. Content not known. Auction-ID: A1-50656-190
Electric/hydraulic press unit on transport trolley Machine size 630x450x600 mm Transport trolley 900x520x940 mm Auction-ID: A1-50656-179
- Strength 4100 kg. - Pedal actuation. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-604
- Strength 4100 kg. - Pedal actuation. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-603
Please note! Without further accessories. Defect Auction-ID: A1-50340-85
Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement.
General Description Mechanical stamping press manufactured by ILR , designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operatin ...
Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.
The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...
Frame press Maweg hydraulic Type: EURO-AUTO Year of Make: 1991 Machine No. 09111003001 Crimping dimension L 2700 mm x H 1800 mm 3 movable press rams with 1 hydraulic each. Cylinder from above 1 movable stop beam from the right with 2 hydr. cylinders Bearing surface of the printing plates 120 x 100 mm Cylinder stroke 200 mm 3 brackets for low parts, length 300 mm Pneumatic quick adjustment system of the upper press punches With 3 mm rack and pinion grid system 2 Hand Safety Automatic Control complete with hydraulic pump Dimensions 3600 mm x 900 mm x H 2500 mm
Offer 26321 Technical data: - Max pressing force approx. 100 t - Max ram stroke approx. 159 mm - Pressure stamp left + right can be moved by hand crank - Stand width approx. 780 mm - Stand depth approx. 300 mm - Max. installation height approx. 820 mm - Table height-adjustable in 6 positions with hand crank and plug-in bolt grid - Grid spacing 140 mm - Connection 400 V - Space requirement approx. W 1550 x H 1900 x D 1000 mm - Weight approx. 850 kg
Technical data Maximum pressure: 8 tons Power connection: 400V/4kW Press force: 3.23 kg/cm² Year of Make: 1991 Bale size: 550x450x350 mm Productivity: - Bale weight: 30-60 kg Price: on request Machine is fully functional after technical supervision.
Joos HP 90 Hydraulic veneer press with electric combi heating plates For sale is a well-maintained veneer press with the following data: -Pressing area 2.55m x 1.35m -Height of the pressing room 0.4m -Operating pressure 355 bar -Basic dimensions 2.98m x 1.53m x 2.1m
The Dorst TPA 50 is a used mechanical powder compacting press, designed for precision and efficiency, making it well-suited for demanding industrial applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is both robust and reliable. It allows for a maximum filling height of 180 mm and a pressing stroke of up to 90 mm. Engineered for versatility, it features an upper punch stroke of 120 mm and an adjustable stroke of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. The machine requires a compressed air supply of approximately 200 liters per minute and has a total connected load of about 18 kW. Its solid construction occupies a footprint of approximately 2000 mm in width and 1700 mm in depth, with a height of 3250 mm and a total weight of approximately 5,500 kg.
Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use due to pneumatic height adjustment Duelhole drilling on two planes in one clamping Motor power 1.5 kW Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment on the side in 12mm grid Stop for length adjustment in slotted milling 2 swivelling workpiece supports Special stop syst ...
MATABOSCH H-6 – Hydraulic Vertical Baling Press Manufacturer: J. Matabosch S.A. Model: H-6 Year of Manufacture: 1985 Country of Origin: Spain Condition: Used Technical Specifications Description Specification Manufacturer J. Matabosch S.A. Model H-6 Machine Type Vertical Hydraulic Baling Press Year of Manufacture 1985 Pressing Force 10 Tons Motor Power 2 HP (CV), approx. 1.47 kW Electrical Supply 380 V Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Chamber Hydraulic Cylinder Vertical Operation Manual Hydraulic Controls Bale Ejection To be confirmed Machine Serial Number 2676 Construction Heavy-Duty Steel Frame Manufacturer Location Barcelona, Spain Auction-ID: A1-51153-101
High-pressure compressed air handling unit , mounted on a chassis and equipped with a temperature and pressure control device. Manufacturer: BEKO TECHNOLOGIES GmbH Type: AC 020-030 +35°C HP 060 Year of Manufacture: 01/2020 Serial Number: HP030.060.0120679 Test pressure: 143 bar(g) Maximum permissible pressure: 100 bar(g) Working pressure of compressed air: 60 bar(g) Operating temperature: +20 to +35 °C Maximum volumetric flow rate at the inlet: 30 m³/h according to ISO 1217 Power supply: 230 V / 1 Ph. / PE / 50 Hz Approximate weight: 210 kg Notified Body: TÜV NORD Systems Visible equipment: STÖRK temperature controller, pressure gauges, stainless steel piping and two pressure vessels Marking: CE 0045 Visible pressure vessels: Type: HD-B147.100 Serial numbers: 1470120470 and 1470120471 Unit volume: 7.7 liters Test pres ...
SCHULER mechanical eccentric press, approx. 25 ton according to visible plate. Foot pedal and lubrication unit visible. Older machine, condition as shown; safety equipment and operation must be checked before use. Auction-ID: A1-51153-15
High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 27/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Compressor speed: 1,500 rpm Power Requirement: 13 kW Electric motor: LAMMERS, three-phase, 15 kW at 50 Hz Motor speed: 1,470 rpm at 50 Hz Motor connection: 400 V Δ / 690 V Y – 50 Hz Motor protection rating: IP55 Efficiency class: IE3 Indicated engine weight: 160 kg Visible equipment: control cabinet with Siemens LOGO! TDE, main disconnect switch, selectors and reset button Marking: CE – Made in Germany Auction-ID: A1-51172-27
HSM 18 – Vertical Hydraulic Baling Press Manufacturer: HSM Pressen GmbH, Germany Model: HSM 18 Machine Type: Vertical Hydraulic Baling Press Year of Manufacture: 1981 (identification plate) Condition: Used Technical Specifications Description Specification Manufacturer HSM Pressen GmbH Model HSM 18 Pressing Force 18 Tons Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Door Bale Ejection To be confirmed Compression Chamber Heavy-Duty Steel Construction Electrical Supply To be confirmed Hydraulic Power Unit Integrated Control System Push-Button Controls Safety Mechanical Door Locking System Machine Number 180 071 Year 1981 Inventory Number 644987 Auction-ID: A1-51153-97
maximum number of results exceeded
please refine your search
375 € 
