cnc portal milling used for sale

CNC turning and milling center Okuma Multus B300II-W Control: OSP-P 300SA Year of Make: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis with stroke: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40-fold Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. pump 20 bar - Preparation for in-process measurement - Tool height correction in Y-axis for turning tools - Hi-Cut Pro high-speed control

CNC shearing machine manufactured in 2022. This Metallkraft MTBS 2100-40 B features a cutting length of 2100 mm and a motor power of 7.5 kW. It can handle a maximum sheet thickness of 4 mm at 400 N/mm². If you are looking to get high-quality shearing capabilities, consider the Metallkraft MTBS 2100-40 B machine we have for sale. Contact us for further details.

To mediate on behalf of the customer. Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32 Manufacturer: Gildemeister Control: Fanuc 160iB First commissioning: 2003 #009328 Location: Poland Control Fanuc 160i-B Turning length 120 mm Turning diameter 32 mm Number of axes 8 Travel X1 axis 65 mm Travel Y1 axis 350 mm Travel Z1 axis 120 mm Travel X2 axis 265 mm Travel Y2 axis 235 mm Travel Z2 axis 320 mm C1-axis travel 360° Travel C2 axis 360° Spindle bore 42 mm Spindle speed 8000 rpm Motor power 7.5 kW Total power requirement 34 kVA Dimensions L 4900 x W 1630 x H 1920 mm Weight 4350 kg The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

video available

Key data: 165 kN, 6 mm, 1250 mm

The machine was purchased directly from Trumpf in 2015. It was a demonstration machine from 2012, which had previously been used in the Trumpf training workshop (there only a few operating hours). Later, it was used in single-shift operation in the housing production of welding machines. Therefore, only 15700 operating hours. Exclusively in the sheet metal sector, especially sheet steel 1.25 and 2.0mm, occasionally 3mm. No stronger material. No known defects, machine is currently still in use, available from May 26. Reason for sale: Discontinuation of production. The "Compact Edition" of the TP1000 is optimized for a part size of 1250x1250. Larger formats can be done with the "Reset" function, additional tables are necessary. The outstanding advantage of the "Compact" machine is the small space requirement of only 4.13 x 5.84 m. The machine is equipped with almost all availab ...

This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details.

This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details.

This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine.

Key data: 100 t, 3000 mm

8 Axis machine with tooling

This 4-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details.

This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.

Auction-ID: A1-45752-14

Auction-ID: A7-45927-1

AMADA LCG 3015 AJ fiber laser was built in 2016 in Japan by Amada Co., Ltd. It is an extremely versatile machine designed for precision machining of a wide range of materials, i.e. structural steel, stainless steel, aluminium, brass and copper. It is distinguished by the use of state-of-the-art components and a robust design that maintains stability during even the most demanding challenges. The sheet metal cutting process is performed by means of fibre optic technology, which offers many advantages over traditional cutting methods. The use of this technology in production makes it possible to quickly cut complex shapes with the highest precision and accuracy. It is also distinguished by its high energy efficiency, which results in lower energy consumption and a significant reduction in operating costs. The AMADA LCG-3015 AJ is equipped with a reliable cutting head with an efficien ...

HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...

HAAS ST-30 CNC lathe was built in 2018 in the United States by HAAS AUTOMATION, INC. The machine on offer is an excellent choice for both unit and series production. It is capable of performing a number of complex operations, i.e. precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, reaches a maximum speed of 3400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. Tools taken from the 12-position turret are continuously measured and calibrated to guarantee maximum machining precision. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 is distinguished by its compact design, engineered with extreme rigidity and  ...

CNC lathe Type: Lynx 220 Manufacturer: Doosan Year: 2012 Control: Fanuc i Series Spindle hours: 1743 Max. turning diameter: 320 mm X: 175 mm Z: 330 mm Spindle speed: 5000 rpm Turret: 12 positions Tailstock Chip conveyor Tool probe Part catcher Machine in good condition, fully functional, under power Find more here - / Contact us at -

5-axis CNC machining center Type: DMU 50 eco Manufacturer: DMG Year: 2009 Control: Siemens Sinumerik 810D+ShopMill X: 500 mm Y: 450 mm Z: 400 mm B: +110°/-5° C: 360° Max spindle speed: 8.000 rpm Spindle taper: SK40 Tool magazine: 12 positions Probe DMG TS 649 Machine in good condition, fully functional, under power Find more here - / Contact us at -

To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details.

This 5-axis MORBIDELLI Author X5 was manufactured in 2007. It features a powerful spindle that was completely overhauled in 2022, ensuring optimal performance. The machine includes a circular carousel tool changer and comes with multiple vacuum pods for workpiece holding. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details.

CNC vertical machining center Type: VF-2 Manufacturer: Haas Year: 2014 Control: Haas X: 762 mm Y: 406 mm Z: 508 mm Table: 914 × 356 mm Max.table load: 680 kg Spindle speed: 10000 rpm Tool magazine: 24 positions Spindle taper: SK 40 4th axis HRT 210 Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: TCH 500 Prime/80 Manufacturer: Tajmac-ZPS Year: 2006 Control: Siemens Sinumerik 840D Turning diameter: 550 mm Turning length: 1000 mm Spindle bore: 80 mm X: 360 mm Z: 1100 mm VDI 50 rev.head: 12 positions Spindle speed: 3200 rpm Driven tools Tailstock Machine weight: 9500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: SV 1350 Manufacturer: Akira-Seiki Year: 2012 Control: Mitsubishi M700 Hours: 22858 X: 1350 mm Y: 640 mm Z: 750 mm Table size: 1500 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Internal cooling Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: SV 1150 Manufacturer: Akira-Seiki Year: 2011 Control: Mitsubishi M700 Hours: 18427 X: 1150 mm Y: 640 mm Z: 750 mm Table size: 1300 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Tool and work probe Machine in good condition, fully functional, under power Find more here - / Contact us at -

A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026.

Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment.

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

Inv. Num. : 9085 Type: KMX XL 32 Producer: Manurhin Created: 2003 Parameters: Maximum turning length: 330 mm Max. turning diameter: 33 mm Length: 3850 mm Width: 2000 mm Height: 2100 mm Weight: 6000 kg

Inv. Num. : 9089 Type: CT 40/1000 Producer: Gildemeister Created: 1991 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 225 mm Spindle diameter: 56 mm Weight: 3200 kg Equipment: Chip conveyor Tailstock Spare parts Shovel Powered tools

Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible.

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

Turning length 1.545 mm Turning diameter 500 mm (710mm) X-axis 690 mm Y-axis 230 mm Z-axis 1550 mm B-axis 225° C-axis 360° (0.001°) W-axis 1550 mm Spindle Bore Ø 98 mm R.P.M. 36x 30-3000 KW 30/22 Tapid traverse 26 – 40 m/min Auction-ID: A1-45737-1

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-45737-6

CNC Shearing Machine manufactured in 2022. This Durma SBT 4006 features a cutting length of 4,100 mm and a cutting capacity of 6 mm thickness. It is equipped with a DURMA DT-7 CNC control system for precise operation. If you are looking to get high-quality shearing capabilities, consider the Durma SBT 4006 machine we have for sale. Contact us for further details.

CNC nesting machining centre manufactured in 2021. This FORMAT4 Profit H80 21.31 features a working area of 3090 x 2100 mm and a powerful 10 kW spindle with speeds up to 24,000 rpm. It includes an 8-spindle drilling head and a 15-position tool changer. If you are looking to get high-quality nesting capabilities, consider the FORMAT4 Profit H80 21.31 machine we have for sale. Contact us for further details.

CNC LATHE WITH SUBSPINDLE AND Y-AXIS Inv. No. 13.032C1 Make MAZAK Model SQT250MSY Control T-PLUS Center distance 495 mm Max. swing over bed Ø 525 mm Max. swing over cross slide Ø 350 mm Spindle bore Ø 64 mm R.P.M. 35 – 4,000 (16x) kW 18 Volts 380 Cycles 50 Including: 12 pos. A.T.C.(driven tools) Hydraulic chuck Ø250mm Auction-ID: A1-45737-9

This 3-axis BIESSE Rover 24S was manufactured in 2002. It features a length of 3390 mm and an overall width of 1500 mm, with a conveyor speed ranging from 28 to 140 m/min. The machine has a weight of 710 kg and is equipped with a powerful 1.1 kW motor. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover 24S machine we have for sale. Contact us for further details.

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

CNC – Transl. Machining Centre Inv. No. 10.653MM Make UNISIGN Model Univers 4 Control Siemens Sinumerik 810D Travel X (Longitidinal) 1,600 mm Y (Cross) 400 mm Z (Spindle Height) 400 mm Taper ISO 40 Table 700 x 400 mm Load 600 kg Distance Spindle Nose to Table 150-550 mm R.P.M. 9.000 Main spindle kW 14 Rapid Traverse X,Y,Z 5-28,000 mm/min. Feed rate X,Y,Z 28,000 mm/min. A.T.C. 44 pos. Auction-ID: A1-45737-100

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

The machine is in good technical condition, after prior agreement it is possible to test it. Head Precitech - Germany, Source IPG. Dior plates changed this year. Automatic change - 2 tables. Table 3x1.5 m.

CNC LATHE Inv. No. 13.016C1 Make MAZAK Model QUICKTURN 20N Control MAZATROL CAM TZ Center distance 1.037 mm Max. swing over bed Ø 510 mm Max. swing over cross slide Ø 310 mm Spindle bore Ø 80 mm R.P.M. 12 – 3,000 kW 18.5 Volts 380 Cycles 50 Including: 8 pos. A.T.C. Auction-ID: A1-45737-127

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-45737-190

CNC HORIZONTAL MACHINING CENTER Inv. No. 12.178MM Make TOYODA Model LINEAM III Control MELDAS M650 Year 2004 TABLE Pallet size 450 x 450 mm Max. load on pallet 400 kg Table indexing increment 0.001 degrees STROKE X-Axis stroke 630 mm Y-Axis stroke 630 mm Z-Axis stroke 700 mm Distance from spindle center to top of pallet 50 – 680 mm Distance spindle nose /center rotary index table 50 – 680 mm FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20,000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2.5 sec. DRIVE MOTOR Spindle drive motor Ac 45/30 kW MACHINE WEIGHT & POWER REQUIREMENTS Machine weight 15.000 kg Power requirement 96 kVA ACCESSORIES: Spindle linear mo ...

CNC lathe Type: Style 510 Manufacturer: Style Year: 2021 Control: STYLE 2021 Turning Edition Swing over bed: 510 mm Swing over cross slide: 300 mm Center distance: 1350 mm Bed width: 330 mm Main motor power (S6): 11 kW Spindle bore: 80 mm Max. weight between centers: 750 kg Maximum spindle speed: 2500 rpm Spindle nose: D1-8 X and Z Axes Rapid traverse: 8 m/min Feed rate range: 2 m/min Tailstock Quill diameter: 80 mm Quill travel: 160 mm Quill taper: MT5 (Morse Taper 5) Turret: 8-position Machine in very good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: 2016 Control: Fanuc X: 1270 mm Y: 635 mm Z: 610 mm Spindle taper: SK40 Table: 1420 x 610 mm Max table load: 1000 kg New spindle in 2025 4-axis GSA with tailstock Internal cooling 20 bar Machine in good condition, fully functional, under power Find more here - / Contact us at -