cnc portal milling used for sale

WE OFFER AN BRAND NEW MACHINE, MACHINE WAS NEWR USED FOR WORK ATTACHED PHOTOS MACHINE IS AWAILIBLE IMEDIATELY

: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

FIDIA K165 5-axis milling machine purchased at the end of 2001 with a ridiculous number of working hours. Used only for small prototyping. Spindle at 32,000 rpm, 6KW, automatic pre-setting device with laser probe, CAM HI-MILL software, CATIA direct interface module, remote control panel with handwheel. Automatic magazine for 20 tools. Workpiece table 1400x815mm h700mm

Inv. Num. : 7252 Type: SMX Producer: REXIM Created: 2018 Parameters: Work table length: 1350 mm Work table width: 355 mm Maximum table load (uniform): 600 kg Maximum distance between the spindle and the table: 520 mm

Key data: 3000 mm

CNC gantry machining center AWEA LP3016YF with Fanuc control very good condition immediately available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

Control Heidenhain TNC 620 Travel X 400 mm Travel Y 315 mm Travel Z 350 mm Table clamping surface 710 x 315 mm Recording ISO 40 Distance from spindle nose to table 100 / 450 mm Max. horizontal spindle speed 3000 rpm Max. vertical spindle speed 3000 rpm Drill quill: 80 mm Rapid traverses X,Y,Z 5,5,3 (m/min) Power KW 10.5 (13.7) Dimensions LxWxH 1'520×2'2130×2'1950 Weight approx. 1700 kg

X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -

Key data: 3000 mm

CNC gantry machining center AWEA SP3016 with Fanuc control. Table load 10000 kg very good condition immediately free. Dismantling and loading of suitable trucks can be carried out cost-effectively. Installation and commissioning on request.

Key data: 500 mm, 250 mm, 260 mm

quill stroke 480 mm , table 800x320 , max. 300 kg , SF 32 , 100-9.000 rpm , 5kW , 60 Nm , Heidenhain TNC 124 ,

MÜGA High-Speed Drilling-Milling Center S 3030 with 2-fold pallet changer (similar to FANUC or BROTHER) YOC 2011 Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-fold Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Rapid traverse: X/Y/Z: 48/48/60 m/min. Footprint: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: Thanks to the 2-fold pallet system, the machine is suitable for As well as the high rapid traverses and fast chip-to-chip time for serial part production. From 2011 to 2020, it was used exclusively for ALU machining in single-shift operation. There is no hour meter The machine is still energized and will be ...

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Gildemeister GMX 250 Linear The GMX 250 Linear is a turning-milling centre for producing rotational parts, type flange. It machines the complete part in one run without the operator interfering from a semi-finished part, for instance a cast part. In fact, from both sides using two clampers. The machine is able to turn, mill, drill, produce threads etc. Operating system – Heidenhain plus it with turnplus Working range Maximum turnable diameter 640 mm Maximum turnable diameter of the counter spindle 400 mm Distance between the spindles 1,500 mm Turntable length 1,185 mm Main drive Maximum output 28 kW Maximum speed 5,000 min-1 Maximum torque 320 Nm Tool magazine Number of tools in the magazine 46 Number of tools in the turret 12 Tool interface HSK 63, VDI 40 Main drive Maximum output 28 kW Maximum speed 5,000 min-1 Maximum torque 320 Nm

Table: 3860 x 1200 mm Maximum weight on table: 10.500 Kgs X-axis traverse: 3500 mm Y-axis traverse: 1300 mm Z-axis traverse: 1800 mm Milling head model: Automatic 2.5º x 2.5º Spindle taper: ISO 50 Spindle speed: 4000 r.p.m. Power: 32 kw Feedrate: 10.000 mm/min Rapid traverses: 20.000 mm/min Year: 2010 Equipped with: Control: HEIDENHAIN iTNC 530 Electronic handwheel: HEIDENHAIN HR-410 Tool magazine: 40 htas 4th axis rotary table: FIBRO 1000x1000 mm Extended head for milling at 90 degrees: 500 mm 2 squares: 2 m high Internal coolant supply: Yes Electrical cabinet: cooling supply Several cones

Bed type milling machine ZAYER 30 KF-5000 Table 5000 x 1000 mm. Max allowed weight on the table 10 Tn. Travels: X 4710 mm. Y 1508 mm. Z 2013 mm. Spindle Taper ISO 50 Spindle speed 35-3000 r.p.m. Spindle power 37 Kw Feedrate 6-5000 mm/min Rapid traverse 15,000 mm / min Machine weight 32,000 kgs. Year 2000 Equipped with: CNC HEIDENHAIN TNC 426 Autoindexing milling head 360.000 pos (0.001º). The 2 bodies rotate at the same time. Cooling equipment Chip conveyor

CNC DELECTRON AZ102 Year of construction 1997 Rotating table mm 1800 x 1600 Colgar T- slot dimension mm 28 T- slot center distance mm 250 Longitudinal stroke mm 6.000 Vertical stroke mm 2.000 Cross stroke mm 1000 Axis feed mm / 1 0: 10000 (0: 15000) Spindle diameter in the front support mm 85 Spindle taper ISO 50 Rotating axis coaxial to the ram spindle - continuous working - 360,000 Automatic universal head - vertical / horizontal - indexed ISO 50 System for tool coolant outside the spindle

Features: Automatic head X axis travel 2000 mm Y axis travel 1000 mm Z axis bear 1200 mm Main spindle from 4000 rpm of 30 kw 20000 rpm finishing electrospindle, power 14 kw Tool magazine with 24 positions HSK 63 and ISO 30 tool holder for finishing Double chip conveyor High pressure 20 bar with relaunch tank CNC HEIDENHAIN 530 Digital. Full warranty. The price includes installation and commissioning excluding any foundation

Features: Machine overhauled with the application of HEIDENHAIN 620 Axis travel 6000 X 1000 X 1700 41-place tool changer spindle iso 50 1 degree rear index automatic bi-rotary head front index 3 degrees spindle speed 4000 rpm power 30 kw, rapid on all axes 30 m / min

overhauled machine X axis travel 4300 mm Y axis travel 1100 mm Z axis travel 1900 1 degree rear index bi-rotary head front index 3 degrees AUTOMATIC spindle speed 2000 rpm power 35 kw, Cnc FIDIA M30 rapid 10 meters / min, X axis with electronic games elimination device BRUSCHLESS motors on all axes 3-axis continuous movement, optical lines Table dimensions 6000 X 1100 Full 1 year warranty

Features: X = 2500 mm Y = 1000 mm Z = 1200 mm (vertical) Automatic platform indexed degree / degree C + - 180 ° and hydraulic locking. TBR automatic head Half body 45 ° A 120 indexed positions (3rd) Spindle ISO 50, Power 20 KW, RPM 10 - 4000g / . Automatic electric range change. 30000 g / electrospindle applicable to the head, for finishes. Axis feeds 15,000 mm / Transmission: X axis, precision ball screw. Transmission: Y axis, precision ball screw. Transmission: Z axis, vertical, precision ball recirculation .Vertical axis with cylinder and accumulator hydraulic balancing. X, Y, Z axis measuring systems Heidenhain precision lines CNC TNC 430 Heidenhain DIGITAL. Remote control panel SIEMENS Digital Brush-less Axis Feed Motors and Digital Drives Double Chip Conveyors. Machine base in cast iron. CE marking.

We sell a TRAK DPM 800 CNC milling machine in very good condition. Machine having been little used. DPM type 3 axes operating in MANUAL and CNC Machine stroke X 800 mm Y 420 mm Z 610 mm Table height 970 mm Table dimensions 1270 mm x 320 mm Feed rate of the X, Y, Z axes 5 - 2540 mm / min Manual feed speed Z axis 0-450mm / min Head tilt + 90 ° / -90 ° Spindle diameter 100 mm Manual spindle stroke 120 mm Spindle cone ISO 40 DIN 2080 M16 Spindle speed 70-3800 rpm Spindle power 3.75KW Drilling capacity 36 mm Milling capacity 80 cm3 / min Tapping capacity M30 Maximum weight on the table 600 Kg Integrated watering tank with 1CV / 60 liter pump Automatic centralized lubrication PROTOTRAK command Type AGE3 DC motor on X, Y, Z axis Digital display X, Y, Z Dialogue programming system RS 232 / CAD-CAM link To be taken on site, unpackaged. Exworks delivery

Manufacturer XYZ Model SMX 5000 Year of overhaul 2023 Cycle milling machine SMX 5000 overhauled 2023, with new machine warranty

Universal milling machine Versamatic 750 Rambaudi) with fixed bench with crosspiece and movable table with universal revolving heads. Working in excellent condition. This new series is part of the range of universal milling machines for processing medium/large parts such as molds and equipment. An exclusive feature of this model is the possibility of resuming processing in the transverse axis by moving the crossbar forwards (jump) or backwards (displacement) by 300 mm. without compromising torsional and flexural stability. The engines are 15 KW and 22 KW., the ranges available from rpm from 2000 to 4000. The wide choice of types of universal heads, from simple manuals to the version indexed with the continuous C, gives a notable flexibility of use. The machines can be completed with automatic tool changers, pick-up type table or external wheel with service shuttle, with saf ...

Technical features of the second-hand MTE BF-4200 bed type milling machine Table dimensions: 4200x1000 mm Number of T-slots: 7 T slots measures: 22 mm Max weight on table: 13.000 kgs X-axis traverse: 4000 mm Y-axis traverse: 1200 mm Z-axis traverse: 1500 mm Milling head model: Automatic Spindle taper: 50 DIN 2080 Speed ​​range: 3 ranges Speed: 40-3000 rpm Main motor power: 22 kw Year: 2004 Equipped with: Control: HEIDENHAIN iTNC 530 Electronic handwheel: HR-410 Tool magazine: Yes Internal coolant supply: 20 bar - with paper filter Chip conveyor: Yes

XYZ EMX EMILL 2000 Year 2008 Proto TRAK EMX 2 -axis control Table 1,270 x 254mm Table travel 750 x 380mm Quill travel 127mm Spindle taper R8 Spindle speeds 60-4,200rpm Spindle drive motor 2.2 kW (3 HP). Manual operation/CNC cycles Interlocked table guards Automatic lubrication Low volt light, Coolant Swarf tray Excellent condition

Table: 1800x700 mm T-slots: 5x18x120 mm Maximum weight on table: 3500 Kgs Longitudinal traverse (X-axis): 1700 mm Cross traverse (Y-axis): 800 mm Vertical travel Z: 800 mm Milling head model: Manual Spindle taper: 50 OF 69871/A Speed ​​range: 40-3000 r.p.m. Power: 22 kw Feedrate: 0-5000 mm/min Rapid traverses: 10.000 mm/min Approx machine weight: 10100 kgs Machine dimensions: 4550x3290x3060 mm Year: 2000 Equipped with: Control: FAGOR 8055

X - axis 2000 mm Y - axis 1100 mm Z - axis 800 mm table surface 2200 x 1000 mm max. table load 4800 KG Spindelausladung 1150 mm max. distance spindle nose - table 150 - 950 mm milling spindle: spindle speeds 6000 rpm/min spindle drive 20/30 KW Spindeldurchmesser 100 mm spindle taper DIN 69871 50 ISO tool data: tool weight 15 Kg tool length 400 mm tool diameter 125/250 mm feed range X-Y-Z 8000 mm/min Eilvorschub X-Y-Z 15/15/12 m/min machine weight ca. 20 t floor space requirement 5,5 x 5,4 x 3,7 m CNC HEIDENHAIN iTNC 530 HSCI 20 - ATC HEIDENHAIN HR 550 electr. handwheel Autom. central lubrification Hardened and ground ways Fully protective cabine Internal cooling 20 bar Chip conveyor

X axis travel 5000mm Y axis travel 2500mm Z axis travel 1500mm C axis automatic head cnc rotary table CNC Heidenhain 530 machine in excellent conditions.

Table: 3500x1100 mm Number of T-slots: 6 T-slots measures: 22 mm Maximum weight on table: 8000 Kgs X-axis traverse: 3000 mm Y-axis traverse: 1250 mm Z-axis traverse: 1500 mm Milling head model: Automatic UAD 0.1º Spindle taper: ISO 50 (Din 69871) Clamping system: Hydraulic Speed ​​range: 6000 r.p.m. Spindle power: 37 kw Feedrate: 30 m/min Rapid traverses: 1.2m/s2 Year: 2005 Equipped with: Control: SELCA S4045D Electronic handwheel: Yes Chip conveyor: 2 auger type + 1 lateral Internal and external cooling: Yes Splash guard: Perimetric covers Tool measurement probe: HEIDENHAIN TS

Table: 2500x700 mm Maximum weight on table: 4000 Kgs X-axis traverse: 2500 mm Y-axis traverse: 800 mm Z-axis traverse: 800 mm Milling head model: U22 manual Spindle taper: ISO 50 Speed ​​range: 4000 r.p.m. Clamping: hydraulic Power: 22 kw Feedrate: 5-5000 mm/min Rapid traverses: 12000 mm/min Approx machine weight: 9500 kgs Machine dimensions: 6400x3345x2800 mm Year: 1998 Equipped with: Control: SELCA 3045 Tool Changer: 30 tools Internal and external cooling: Yes

Vertical copying and milling machine Make: Droop & Rein Type: FSM 1255 DA 30 kf Year of construction: 1990 Commissioned: 1992 Control: Fidia CNC 11 Spindle Ø: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 to Total power requirement:55 kW Space requirements: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons

CNC milling machine STYLE BT-1500 is in very good technical condition. Can be seen in operation by appointment. - fourth axle /new unused, original packaging/, complete with tools and equipment, 3 large hydraulic vices /hardly used/ + additional new mobile handling trolley / lift 2t/

The machine is in good technical condition. Table length: 920mm Table width: 280mm Max. load: 300kg Axis X= 450mm Y axis= 300m Z axis = 400mm Dimensions LxWxH: 1450 x 1750 x 2150mm Total weight: 1100kg By prior arrangement, the possibility of a tour in progress.

Type: FGS 63B CNC Parameters: 630 mm, 2000 mm Manufacturer: Tos Year of production / SO / GO: 1999 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. TNC426 control system. Technical parameters: Working range - travels: X-axis: 1250 mm Y axis: 850 mm Z axis: 500 mm Max. table load: 1000 kg Table clamping area: 630 x 1600 mm Working feed: X-axis: 1 - 40,000 mm / min Y axis: 1 - 4000 mm / min Z axis: 1 - 2000 mm / min

Working hours 13560 hours Control unit Heidenhain TNC 426 X-Axis travel 2000 mm Y-Axis travel 800 mm Z-Axis travel 800 mm Table length 2000 mm Table width 700 mm Table load 3500 kg Spindle speed 2500 rpm Spindle taper ISO 50 Motor power 15 kW Rapid feedrate 10000 mm/min Dimensions L 5200 x W 3127 x H 2450 mm Weight 10000 kg

Key data: 2000 mm, 800 mm, 1000 mm

Sachmann T 10 GP, Built in 2001, Control Heidenhain, Travel X/Y/Z 2000/1075/1000 mm, Table size 2200 x 710 mm, max. table load 3,000 kg, Spindle power 15 KW, Spindle speed up to 2,200 rpm, Milling head indexed 2.5° x 2.5°, Feed rate up to 25 m/min, Machine weight 14,300 kg,

Inv. Num. : 7310 Type: KX3 Producer: Numco Generated:- Parameters: Control system: MACH 3 Maximum bore: 20 mm Work table length: 450 mm Work table width: 160 mm Maximum vertical spindle speed: 5000 1/min X-axis travel: 300 mm Y-axis travel: 150 mm Z-axis travel: 290 mm Cone: MK3 Machine height: 1750 mm Machine length: 800 mm Machine width: 780 mm Machine weight: 220 kg

Inv. Num. : 6633 Type: RLG 470-2 Producer: LENZ Created: 2006 Parameters: Control System: Screen Meyer Sinudyn Maximum vertical spindle speed: 60000 1/min X-axis travel: 470 mm Y-axis travel: 650 mm Z-axis travel: 50 mm Accuracy: 0.003 mm Machine height: 1550 mm Machine length: 1820 mm Machine width: 1720 mm Machine weight: 2500 kg Equipment: Technical Documentation Temperature Unit

Travel X / Y / Z: 600 / 450 / 450 mm Control: Heidenhain 430 ITNC Tool changer: 30-fold Mounting: SK 40 Machine Dimension: Length: 2,024 mm Width:1,545 mm Height: 2,750 mm Weight: 6,000 kg Operating voltage: 400 V, 3 phases, 50 Hz Total current rating: 43 A Total power: 30 kVA The defect lies in the control system.

Travel X / Y / Z: 600 / 450 / 450 mm Control: Heidenhain 430 ITNC Tool changer: 30-fold Mounting: SK 40 Machine Dimension: Length: 2,024 mm Width:1,545 mm Height: 2,750 mm Weight: 6,000 kg Operating voltage: 400 V, 3 phases, 50 Hz Total current rating: 43 A Total power: 30 kVA The defect lies in the control system.

Key data: 780 mm, 560 mm, 560 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMC 60 T With track control Heidenhain iTNC 530 Year of construction: 2008 Travels: X 780 Y 560 Z 560 Speed range: 0 – 18,000 rpm infinitely variable With the following accessories: NC rotary table with 2-fold pallet changer 630 mm x 500 mm Vertical tool changer with 60 magazine slots Controlled milling head ( B axis ) IKZ 40 bar Conveyor Integrated screw conveyor Rotoclear Electronic handwheel Mode 3 + 4 Chip Sweeping Gun Full protection cabin with interior lighting 3-Piece Height-Adjustable Machine Shoes Operating instructions

Vertical CNC Milling Center ANAYAK ANAMATIC 9 Year of construction 7/97 Currently dismantled and prepared for transport. The machine was in production until mid-2022 Immediately available and ready to use Technical Parameters: Work table length 1300 mm Work table width 530 mm Maximum table load (uniform) 500 kg Number of tools in the storage container 30 pieces Minimum vertical spindle speed 70 1/min Maximum vertical spindle speed 5000 1/min Mechanical feed length axis X 1070 mm Mechanical feed length axle Y 535 mm Mechanical feed length axis Z 510 mm Maximum Axis Feed Speed X 250 mm/s Maximum feed speed axis Y 250 mm/s Maximum feed speed axis Z 250 mm/s With Fanuc 160i-L Viewing and transport possible at any time We offer inexpensive financing / installment purchase / trade-in of machines! Maschinenhandel Nord new & used machines for industry, t ...

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

CNC milling machine KNUTH WF 1 CNC The CNC milling machine of the renowned KNUTH brand, model WF 1 CNC, built in 1992, offers precise milling results and reliable performance. This used machine is ideal for beginners and hobbyists. Specifications: - Table clamping surface: 270 x 700 mm - Table movement longitudinal (X): 300 mm - Table movement vertical (Y): 200 mm - Table movement transverse (Z): 350 mm - Spindle mount horizontal and vertical: ISO 40 - 8 spindle speeds horizontal: 110 - 1230 rpm - 8 spindle speeds vertical: 150 - 1660 rpm - 8 feeds: 26 - 290 mm/min - Rapid traverse: 1100 mm/min - Quill travel: 60 mm - Drive power: 3.7 kW - Dimensions: approx. 1310 x 1380 x 1650 mm - Weight: approx. 1000 kg The machine is in a used condition and in need of repair. It has proven to be extremely reliable and will continue to work reliably for many years to come. With i ...

Inv. Num. : 5833 Type: FKH 50 Producer: TOS Created: 1987, GO 2017 Parameters: Control system: Brázdil Operating hours: 500 h Maximum spindle speed: 1800 1/min X-axis travel: 940 mm Y-axis travel: 940 mm Z-axis travel: 470 mm Spindle power: 7.5 kW Tool holder: ISO 50 Accuracy: 0.02 mm Spindle extension: 120 mm Machine height: 3200 mm Machine length: 2800 mm Machine width: 2600 mm Equipment: Support plates Grips Complete overhaul carried out

Inv. Num. : 6561 Type: VMC 40/8 Producer: Strojtos Created: 2005 Parameters: Control system: Heidenhain 530 Maximum table load (uniform): 500 kg X-axis travel: 800 mm Y-axis travel: 400 mm Z-axis travel: 500 mm Spindle speed: 8000 1/min Number of axles: 3 Cone: ISO 40 Machine weight: 4350 kg Equipment: Heidenhain Tool Probe Tool Holder

Sell our CNC machine Quaser MV 154 P Travel X700 , Y530, Z500. Spindle speed 12000, 30-fold tool changer SK40 ,IKZ The machine is in very good condition, only plastic has been milled with it. Availability as of now 7000 spindle hours. Spindle re-mounted

Key data: 1800 mm, 900 mm, 900 mm

Control Heidenhain TNC 355 Travel X/Y/Z: 1800/ 900/900 mm Spindle speed 2000 min-1 Tool holder SK 50 Swivel milling head

Description: Serial number: 9712 Control: SIEMENS SINUMERIK 820M Table dimensions: 800 x 390 mm With 6 slots and an attached machine vise (jaw width: 100 mm) and a three-jaw chuck (diameter: 110 mm) Tool holder: SK 40 Travel distances: X: approx. 400 mm Y: approx. 400 mm Z: approx. 400 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,000 mm