cnc optiturn l used for sale

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Sale/Price: complete -Dimensions: 1200/440/H290 mm -Weight: 46 kg

Control, control unit, interface, drive control, drive current control, circuit board -Manufacturer: Linde, control unit from electric hand pallet truck -Type: 3603605020 -Mat no.: 5210175 -Number: 1x control unit available -Price per piece -Dimensions: 130/100/H45 mm -Weight: 0.1 kg/pc.

Horn, siren, bugle, bugle -Manufacturer: Marco, horn siren from Linde electric hand pallet truck -Type: 90/1 L -Dimensions: Ø 90 x 60 mm -Weight: 0.1 kg

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Logitrans, drawbar completely from pedestrian stacker SGL 2000V -Number: 1x drawbar available -Price per piece -Dimensions: 930/345/H110 mm -Weight: 12 kg/pc.

Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2 -Type: EMB9352-E -Input: DC 725V Imax = 25A -Output: Pav= 19 kW Ppk = 32 kW -Quantity: 1x brake module available -Dimensions: 55/380/H185 mm -Weight: 2.3 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Telemecanique, Contactor Square D -Type: LC1D096 LR3D 146 -Number: 1x contactor available -Price per piece -Dimension: 125/45/H85 mm -Weight: 0.5 kg/pcs

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Telemecanique, Contactor Square D -Type: LC1D096 LR3D 086 -Number: 2x contactor available -Price per piece -Dimension: 125/45/H85 mm -Weight: 0.5 kg/pcs

Flow monitor, flow sensor -Manufacturer: Landis & Staefa, Flow monitor type QVE81.13, unused, original packaging -Technical data: see photo of nameplate -Box dimensions: 305/135/H90 mm -Weight: 0.9 kg

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB6032-G -Input: G 325 V DC -Output: G 375V DC 8.0A -Number: 2 modules available -Price: per piece -Dimensions: 215/150/H90 mm -Weight: 0.4 kg/pc.

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch -Manufacturer: TP-Link, 5-port Fast Ethernet Switch -Type: TL-SF1005D -Number: 2 modules available -Price: per piece -Dimensions: 130/75/H30 mm -Weight: 0.3 kg/pc.

Probe, touch probe, 3D probe, stylus, probe head, digimatic indicator, scanning head, measuring head -Manufacturer: Heidenhain, scanning head -Type: LIDA 19/200 -ID No.: 233 039-16 -Number: 2x scanning head available -Price per piece -Dimension: 180/90/H40 mm -Weight: 0.3kg/pc.

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type MS63/4 -Power: 0.25 kW -Speed: 1370 rpm -Shaft: Ø 14 x 40 mm -Design: B14 -Protection class: IP 54 -Number: 2x motor available -Price: per piece -Dimensions: 240/123/H155mm -Weight: 6 kg/pc.

Tool holder, milling holder, milling tool, clip-on holder -Manufacturer: Loewe, milling chucks, MK5 mount -Type: 1/T ECMO -Size: 5 x 32 x 75 -Dimensions: Ø 60 x 276 mm -Weight: 3 kg

Axial piston pump, hydraulic pump, oil pump, gear pump -Manufacturer: Rexroth -Pump: Type LA10VS0 45 DFLR/31R-PPA12N00 -Electric motor: Siemens -Type: 1 LA5163-4AA96-Z IEC160M -Drive: 11 kW -Speed: 1460 rpm -Dimensions: 950/500/H510 mm -Weight: 138kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5166-4AA91 -Power: 15 kW -Speed: 1455 rpm -Shaft: Ø 42 x 110 mm -Design: B5 -Protection rating: IP 54 -Dimensions: 630/355/H400 mm -Weight: 97 kg

Muffler, exhaust system, tailpipe, silencer, exhaust muffler -Silencer: for Linde H60D -Type: G 4979 0694 unfortunately no more precise designation -Dimensions: see photos -Overall dimensions: 1560/370/H230 mm -Weight: 11.2 kg

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 13,600 mm Number of bays per row of shelves: 05 pieces á 2,600 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Frame Type: TC15 Profile dimensions: 100 x 80 x 1.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 5,950 mm high 750 mm deep 40x Pallet rack crossbeam, used Material color: blue Box profile: 90 x 50 mm Truss Type: RTS90 Agraffe: 3 HK (hook) Clear width: 2,600 mm max. load per pair of trusses 1,500 kg at the same weight. Distributed Load 80x locking pins, used Execution: complete galvanized To secure ...

Tumbler Soma, approx. 80 liters volume, completely in stainless steel, with vacuum pump and timer, Connection 400V, dimensions LxWxH approx. 117x97x120cm, weight approx. 230kg, older device, good used condition, fully functional

Used vertical stainless steel tank, 5000 L volume. Tank with frame agitator and jacket (cooling-heating).

Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.

Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: Fumatech MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Leadwell MCV 610CR Vertical Machining Center :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0 - M Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 610mm Y-axis stroke: 410mm Z-axis travel: 510mm Rapid feeds for linear axes X Y Z: 20m/min Table size: 890 x 500mm Table capacity: 300Kg Machine equipment: Fourth axis table :::D DIMENSIONS AND WEIGHT::: Length: 2040mm Width: 2820mm Height: 2800mm

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Point, Incremental Rotary Encoder -Type: EI281B500ZE5LP/LD1 -Hollow shaft: Ø 15 x 26 mm -Dimension: 80/61/H48 mm -Weight: 0.3 kg

Key data: 6 , 230 mm, 150 mm

I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.

Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg

Electric motor, three-phase motor, pulley motor -Manufacturer: Himmelwerk, electric motor with pulley on both sides -Type 2 L12/5.5 2LS80 -Power: 1.1 kW -Speed: 2780 rpm -Pulleys: Ø 120/155 mm -Design: B3 -Protection class: IP 44 -Dimensions: 325/185/H155 mm -Weight: 10.2 kg

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type AFS 63/4 -Power: 0.22 kW -Speed: 1307 rpm -Shaft: Ø 14 x 40 mm -Design: B14 -Protection class: IP 54 -Dimensions: 235/116/H160 mm -Weight: 5.4 kg