131,227 used machines on RESALE, but how to find them? Machine Search
strip encoder for wet adhesive tape Cyclop Lapomatik; good condition; cleaned and tested; Max. Ready to roll 100mm, min.20mm; Strip length 100-1150mm; Heater for quick drying. Paper tape dispender Cyclop Lapomatik; good condition; cleaned and checked; max.roll width 200mm, min.20mm; Strip Lenght 100-1150mm; heater for fast drying.
Pressure regulating valve, pressure regulating directional control valves -Operating pressure: 0-10 bar -Number: 4 x valves available Price: per piece -Weight: 0.06 kg
round brush -Outer diameter: Ø 200 mm -Reach: 20 mm -Width: approx. 30 mm -Price: per piece -Quantity: 5 available -Minimum order quantity: complete -Weight: 1 kg/piece
120 m pallet rack Galler New & used goods very good condition, see pictures. Height 5 m Depth 110 cm, blue Capacity 12 tons Beam length 2.95 m yellow Carrier with ballast /compartment 2550 kg Negotiation price: € 14.990,-- net from stock Offer consists of: + 41 pcs. frame pre-assembled, depth 110 cm, height 5 m +240 pcs. beam, length 2.95 m, 2550 kg ballast/compartment +480 pcs. Suspension locks + 82 pcs. concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale res ...
Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch unused Ovp -Type: SME-8-K-LED-24 150 855 -Number: 22x available -Price: per piece -Weight: 0.1 kg/piece
Pneumatic cylinder holder, bearing block, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: LSN-160 -Weight: 6 kg
Braking resistance, charging resistance, damping resistance, filter resistance -Manufacturer: LENZE -Type: 82R 10% 200 W Article No.: 360112 -Number: 3 resistors available Price: per piece -Weight: 1.3 kg
used
Size: 1.000 x 3.780 mm - Included frame - Will be overhauled, sandblasted and painted
Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg
Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg
Control unit for electric forklifts, electric motor, DC motor, drive motor, motor control, motor controller, control, drive control, voltage converter, cooling fan, radiator, fan -Manufacturer: Linde, cooling fan from Linde R14 forklift -Dimensions: 260/150/H80 mm -Weight: 1.0 kg
Key data: 400 mm, 150 mm, 22 kW
I am selling an industrial planer LEDINEK ROTOLES 400 D-S. Built in 2001. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. material take-off 8mm Rotating Shaft 48 Knife Feed speed 10-45 m/min. Motorized thickness adjustment with digital display. Diameter of the extraction hood 200 mm (30m/sec. required) Main spindle motor 22.0 KW. Feed motor 3.0 KW. Total power 26 KW. Total weight 1800kg. European product, manufactured in the EU, with CE certificate and instructions for use. Machine in stock in Kežmarok, Slovakia, possibility to test.
SPECIFICATIONS: Workbench for reading and cutting glazing beads Workbench dimensions: 3000 x 1250 mm Tilt of saw blades: 45° Pneumatic/electric operation
hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg
Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!
MAZZONI LB toilet block production line. New 2007. The line consists of : 1. mixer PS-256.1 2. screw conveyor T-255.1 3. extruder PL-258.1 4. cutting device (twin-bladed slicer) PX 258.1 5. cutting machine (tracked single-feed slicer) PX 256.1 6. additional production line equipped with bag dust collector FW-PARTNER-2200/N 7. additional belt conveyor for transport of difficult raw material . 8. single-coil forming head. 9. double-coil forming head. 10. COREMA thermoregulator.
Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg
Lippert conveyor roller curve 90° 980-900 IR900 RA2114 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 900 mm Nominal/outer width (NB): 980 mm roller width (NUB): 900 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor, R40DT71D4BM Engine power: kW 0.37 S1 Hz 50 Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 980 Roll width in mm: 900 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfac ...
Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm -Weight: 14.2 kg
Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal, Interbus S -Manufacturer: Lenze, Interbus S Module Bus Drive -Type: 33.2111IB -Number: 11x module available -Price per piece -Dimensions: 75/45/H60 mm -Weight: 0.1 kg/pc.
Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.
Refrigeration unit Bitzer 4JE-15Y-40P for TK or Plus cooling Year of manufacture 2022, like new Displacement: 63.5m3/h 33 Kw cooling capacity at minus 10°C 13 KW at minus 30°C 11 kw./15 hp. Electrical power, Amp.30.8 Refrigerants 404a, 449a, 448a, 452a,134a etc.
We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg
High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg
Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg
PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, Simatic PC 612 F control card -Type: PC 612 F B1100-F425 C79458-L9001 -Dimensions: 250/200/H20 mm -Weight: 0.5 kg
Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg
Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg
Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg
We sell here a cooking system from the manufacturer ASCA Consulting in a very good used and functional condition. The system is built in 12/2014, electrically heated, 400 volts, 20 kW, chamber volume 1800 litres, Aditec MKA 110 control, workshop tested, ready for immediate use, dimensions W/D/H 170/140/255 cm, others on request.
Key data: 45 °, 3800 mm
SPECIFICATIONS: Max. saw blade diameter mm: 400 Saw blade inclination: 0° - 45° Saw carriage length mm: 3800 Installed capacity: Hp 7.5 Scoring diameter mm: 120 2 angle stops
Refrigerated display for promotional products to increase the sales. In very good conditions, suitable for every supermarket. Thecnical features: Dimensions 200x100x90h Power input 220 Volt Gas Propane R290 Automatic defrost Digital display Working temperature 0/+8°C Each product is refurbished, tested and cleaned internally and externally. Ready to use
Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg
Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box
Alfa-Laval liquidring pump. MR200. 7.5 KW. Only 1 more available Fully tested, excellent condition
Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SMTO-1_PS-S-LED-24C 151685 -Number: 2x switches available -Price per piece -Dimensions packaging: 150/110/H20 mm -Weight: 0.1 kg/pc.
Waukesha Rotary lobe pump 060 7,5 KW 1440 RPM Excellent condition
Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark
Alfa-Laval centrifugal pump fully overhauled YOM 1999 18.5 KW 2920 RPM
Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SME-8-S-LED-24 693 425 -Switch: Festo 150 857 N413 -Number: 8x switches available -Price per piece -Dimensions packaging: Ø 100 x 10 mm -Weight: 0.1 kg/pc.
Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch, unused, original packaging -Type: SME-8-K5-LED-24 175 404 -Quantity: 1 available -Price: per piece -Packaging dimensions: 150/60/H30 mm -Weight: 0.1 kg/piece
diesel tank system, diesel tank, gas station, fuel tank system, fuel tank, petrol tank -Diesel tank: fuel tank, universal use -Content: approx. 45 liters -Tank: dimension 620/220/H330 mm -Total dimensions: 660/220/H610 mm -Curb weight: 11.7 kg
Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT 380.RM -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg
Hydraulic pump, oil pump, gear pump -Manufacturer: Casappa, hydraulic pump -Type: PLP30.27DO-83E3-LGF/GE-N -Shaft: Ø 19 - 22 mm M14 x 1.5 - Connection: G3/4 , G1 -Dimensions: 175/125/H155 mm -Weight: 9kg
Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg
maximum number of results exceeded
please refine your search
