cnc optiturn l used for sale

Adjustable traverse, crane traverse, traverse for pillar slewing crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Carrier dimensions: 360 x 150 mm (narrow I carrier) -Total dimensions: 4240/240/H630 mm -Own weight: 400 kg

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

5.75 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 5,76 m Shelf offer consisting of: 04 x frame approx. 200 x 60 cm, disassembled. 24 x truss approx. 185 cm. 12 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 620,00 € Net plus statutory VAT. You will receive an invoice with VAT.

7.65 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 7.66 m Shelf offer consisting of: 05 x frame approx. 200 x 60 cm, disassembled. 32 x truss approx. 185 cm. 16 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 815,00 € Net plus statutory VAT. You will receive an invoice with VAT.

11.45 M WIDE SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 11.46 m Shelf offer consisting of: 07 x frame approx. 200 x 60 cm, disassembled. 48 x truss approx. 185 cm. 24 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1205,00 € Net plus statutory VAT. You will receive an invoice with VAT.

13.36 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 13,36 rm Shelf offer consisting of: 08 x frame approx. 200 x 60 cm, disassembled. 56 x truss approx. 185 cm. 28 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1400,00 € Net plus statutory VAT. You will receive an invoice with VAT.

57 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 57 rm Shelf offer consisting of: 031 x Frame approx. 200 x 60 cm, disassembled. 240 x truss approx. 185 cm. 120 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 5885,00 € Net plus statutory VAT. You will receive an invoice with VAT.

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter -Manufacturer: Landis & Staefa -Type: RAM142.0/1982 -Dimensions: 185/95/H80 mm -Weight: 0.3 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg

Lauda ITH150 / 6KW heat transfer system LSI 51337 circulator 20 - 350°C. The plant was dismantled during operation. The insulated metal flexible hoses come along. They have 12mm Swagelok clamping ring fittings. The original description for all relevant components and the system itself is part of the delivery.

Three-phase motor, electric motor -Power: 15 kW -Speed: 1450 rpm -Shaft: Ø 36 x 135 mm -Construction: B14 -Dimensions: 840/320/H425 mm -Weight: 127 kg

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Hazard lights, night signs, flash lights, day and night signs, obstruction lights, signal lights -Manufacturer: lanthanum, obstruction light -Type: HF102DC -flashing -one piece available -Dimension: Ø 64 x 93 mm -Weight: 0.3 kg/piece

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Lenze, series 8600 -Type: 8603_E.2D.20 -Input: D 400 -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg

Volume: 1000 liters Loading: 450 kg Drum diameter: 1120 mm Electrical power: 1.9 kW / 3.9 kW / 9.75 Height: 1700x1200x1700mm Delivery time: 30 days after advanced payment

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Machine Details Stock-No. 1105-03852 Type of machine milling machining centers - vertical Make DAH LIH SONGS Type LIEDER MCV 2600 Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis free loaded on truck, ex works Price Technical details X-Travel 2600 mm Y-Travel 870 mm Z-Travel 760 mm table surface area 2800 x 970 mm control HEIDENHAIN TNC 530 spindle turning speed range 12000 rpm spindle drive 15 kW tool adaptor BT 40 Internal Coolant System Feed 20 bar Feed 10 m/min Rapid Traverse 20/20/30 m/min total power requirement 25 kW Additional information used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - Spindle Oil Cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDLE 20 BAR ...

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4G -Voltage: 110 V -4 sockets: remote controllable -Incl. Accessories: see photo -Dimensions: 220/260/H55 mm -Weight: 1.6 kg

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: ?1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

Compressor, compressor make Dorin, type H1502CS/LIE, 56.8 cbm/h, NEW

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 28 x 57 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 Stück -Dimensions: 365/273/H250 mm -Weight: 20 kg/piece

Year of construction: 2011 Hours 4450 Load capacity 1600 kg Duplex mast Lifting height 4730 mm Construction height 2830 mm Free lift 150 mm Battery 24V 360 Ah Initial lift (increased ground clearance) Accessories: Charger

2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!

5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome.  ...

1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB05BL: control unit -LUB12: basic device -Price: per piece -Number: 16 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Stacking electrode 2.5 x 250 -Type: SH Purple R -Weight per package: 3.4 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 108 mm -Weight: 6.5 kg

Used steam boiler made by Loos, capacity 640 kg/h of steam per hour and pressure 10 bar. New 1993. Oil burner.

Used steam boiler made by Loos, capacity 3200 kg of steam per hour and pressure 10 bar. New 1999. Temperature 185 deg C

Hydraulic. guillotine shears, used, ready for demonstration hydraulic plate shearer, used , ready for operation Typ / type: 252.6000.4 Fabr./ make: Helmut Lotze Baujahr/ year: 1995 Lager-Nummer / Stock number: 0989 Blechstärke bei größte Blechbreite/ thickness at max. cutting length: 4 mm Schneidbreite/ cutting length: 6040 mm Weight: approx. 22 t Specification: Hinteranschlag / backstop Rollablage / Roller tray

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

1 piece hydraulic radiator with electric motor, 2 pieces hydraulic pump and filter for sale. To be delivered completely on pallet. Other hydraulic components available.

suitable for nitrogen all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm 12 kW

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 044927 TT 321-2 302R 171.6-905 E23 -Outer milling cutter: Ø 172 mm -Height: 30 mm -Hole: Ø 40 mm -Bolt circle: Ø 60 x 8 mm -Weight: 1.7 kg

Optical fiber, connection technology -Dimensions: 440/280/H170 mm -Weight: 1.5 kg

Used disc batch centrifuge made by Spomasz, type: LWG-47 (Alfa Laval 3191 replacement). 5 pieces available. Technical data: - Capacity: 10000 L / h - Bowl speed: 6000 rpm - Motor power: 11 kW; 3+N, 50 Hz, 380 V - Overall dimensions: 1240x800x1835 mm - Weight gross: 1075 kg - Weight net: 875 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Remote control sockets: 4 -Dimensions: 225/110/H45 mm -Weight: 1.0 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Three-phase motor, electric motor -Power: 5.5 kW -Voltage: 400/690 V -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP55 -Dimensions: 450/260/H330 mm -Weight: 43 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Plummer Block Housings, Plummer Block Housings -Hole center height: 40/Ø 10 mm -Base plate: 145 x 95 mm -Price: per piece -Number: 2 pieces -Dimensions: 145/95/H approx. 65 mm -Weight: 1.3 kg

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Electric motor, three-phase motor -Manufacturer: Himmelwerk, electric motor type 2 LF12 / 5.5 -Power: 1.1 kW -Speed: 2780 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Dimensions: 250/180 / H270 mm -Weight: 10 kg

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg