cnc optiturn l used for sale

Technical data of the pallet rack crossbar: Shelving system: META Thyssen The scope of delivery includes: 01x Pallet rack crossbar, used Material color: RAL2001 orange Truss type: HN 120|20 Box profile: 120 x 50 mm Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 2,700 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...

Printing line with Oce Variostream model 7170, serial number 37248 and Lasermax rewinder model RW 100. All in production ready condition and still under power.

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

NEW, felling grab JAK 250 (up to 25 cm), for 5 - 11.5 t excavators,

Mediation sale - no VAT can be stated

suitable for Volvo L50, L60, L70, L90, L110, L120 quick coupler, with Harodx, 1920 kg dead weight, as new

Original Kinshofer - Lehnhoff backhoe bucket, 30cm working width with MS01 mount, as new, suitable for Yanmar SV16/18, suitable for 1-2t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

Warneke aluminum tipping body, two axles with steering axle, - Year of construction: 1990, - Support load: 10 t, - Wheelbase: 220cm, - Dead weight: 10.6 t, - Maximum permissible total weight: 30 t

Loxam 02153436 jackhammer

BIG light mast, random shit

Schwarzmüller AZ S08 container carriage, Drawbar trailer, Technical specifications:, - Dead weight: 2,600 kg, - Wheelbase: 2,150 mm, - Gross vehicle weight: 18,000 kg, - Hz. Axle loads [2]: 9,000 kg, - Payload: 15,400 kg, Characteristics:, - 4 container closures, - Trough container recording & encryption, - High air suspension => suitable for all BDF heights, - incl. disc brakes

- Maximum diameter 3800 mm - Minimum diameter 710 mm - Thickness 40N/mm2  up to 6 mm - Thickness 30 N/mm2 up to 8 mm - Thickness 70N/mm2 up to 5 mm - Flanging height 90 mm - Working speed flanging 0 - 20 M/Min - Working cutting speed 0-30  M/Min - Tooling package included

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

For sale is a Stamford LVSI 824 F2 generator with the serial number 0852287/01. This model was originally paired with a Jenbacher 616 engine with the design number B480. The generator has an output of 3,080 kVA at an output voltage of 690 V. The year of construction is 2013, the operating hours so far are 66,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.

Marken Imaje Smartlase Marking 130x

Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance

sheet width: 2540 mm plate thickness: 6 mm rear stop: 900 mm down holder: 14 Stk no. of strokes: 20 Hub/min total power requirement: 10 kW dimensions of the machine ca.: 3100 x 2200 x 2600 mm weight: 5000 kg Features: - Central lubrication - Electric rear stop - 1x side stop 2350 mm - 2x front support arms with stop 1700 mm - Front finger guard - Spare blade (used) - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Newage LVSI 804 S2 generator with the serial number 0856114/01. This model was originally paired with a Jenbacher 612 engine with the design number G168. The generator has an output of 2,560 kVA at an output voltage of 400 V. The year of construction is 2009, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 14,000 euros. For more information or to arrange a viewing, please contact us.

1 gebr. Boiler ------------------------------------ - mounted on frames - Manufacturer : LOOS, International Type : UL-S Capacity : 5,000 kg/h Operating overpressure : 18 bar Steam temperature max. : 204°C Year of manufacture : 1993 equipped with Weishaupt gas burner G50/2-A, ZM, gas control section, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 10.0 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet with touch panel, feed water pump, ECO and the existing coarse and fine fittings.

LEISTRITZ 2x67 mm TWIN SCREW COMPOUNDING LINE, Starve feed hopper extruder with 2 x 67 mm Ø segmented, co-rotating screws 34 L/D max screw speed 300 rpm 6 heating areas on barrel vacuum degassing pump d.c. motor 75 kw with forced vent fan control panel size 0,4×1.15 x 2 mt. Dimensions :LxWxH 4,7 x 0,72 x 1,835 mt. weight about 3.000 kgs construction year 1993 machine offered reconditioned, availability: 7 weeks from confirmation, options available: cooling bath, strand pelletizer, conditions: reconditioned

Manufacturer: EVG Model: Lithoscale Year of Manufacture: 2023 Condition New-Never Used Technical configuration: • For maskless exposure of wafer sizes up to 300 mm • High precision stage including contactless wedge error compensation • Self calibration via integrated sensors • Extensibility up to two (2) exposure heads in total for highest throughput • Separate control unit • EVG CIM Framework software • Self diagnostics during machine start up, automatic initialization of all motors, position end switches, sensors and pneumatic • Inspection available on request • PC controlled operating environment • Solid state drive and hard drive for high availability and reliability • Supported layout format: GDSII Find more here - / Contact us at -

Manufacturer: Leica Model: INS 3000 Year of Manufacture: 2001 Electrical Specifications: - Voltage: 115/230V AC - Frequency: 60/50 Hz - Current (I max): 10 A - AIC of Overcurrent Protection Provided: 50 kA - Number of Phases: 1 Laser Classification: Laser Class 1 CE Marked : YES Condition : Good Find more here - / Contact us at -

Max. load: 350kg, no known defects, without accessories, spare parts, or documentation, year of manufacture: approx. 2015. An on-site inspection is possible.

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Lista Sliding Metal Door Cabinet in Blue

Type Loedige TSHK-160/KGU-400 Serial No. 3901 Year of manufacturing 2004 Hotmixer 210 Liter Blj Uovzzw Ued Dvycsp Coolingmixer 391 Liter

Used cheese-making kettle with a capacity 5000 liters, manufactured in Finland. Stainless steel.

S. No.: 511.1012.471 Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Height=6 m, Overall length= 21 m, Overall width= 3 m, Description proofer for 4 carts climate control Lillnord PG-1000 used in working condition

Height=19 m, Overall length= 90 m, Overall width= 125 m, Description Glimek Bowl lifter for mixer Glimek SP-240

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Fritsch Condition: RENOVATED Made in Germany Description: This Fritsch Line includes: Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Seisukord: Kasutatud Tootja: Baketech Valmistatud: Malta Description Baketech Lintümardaja kahe lindiga lintide kalded reguleeritavad 16A 380V/ 3 kasutatud töökorras

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Lillnord temperatures: +20°C – +45°C humidity: 60%-95% power: 6,2 kW, 380 V Made in Denmark Description for 10 m3 proofer used

Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm

Clamp length: , mm Clamp width: , mm 0: , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames f ...

Brand Collin Lab & Pilot Solutions GmbH Type E 30 M Low Boy Type Screw Single Year of manufacturing 1999 Screw Diameter 30 mm Screw L/D 25 Dimensions (LxWxH) 2.000 x 1.200 x 1.900 mm Weight 560 kG Bwo Ud Dvyew Awczjcsw

Screw Diameter: 27 mm // Throughput: 100 kg/h

Container Size With Actual Configuration: 2 l // Number Of Heads: 8

Output Capacity: 3000 kg/h // Material : PET

Output: 60 U/h // Volume (Max): 20000 ml

Output: 9000 U/h // Bottle Size: 200ml-2l

Air Pressure: 40 bar // Delivery Rate: 1630 m³/h

WEBER buisextrusielijn inclusief: Bws Ud Dvysvryhyscsw WEBER DS 8.5 Elmepla zaag Battenfeld R200/6 Battenfeld V125