cnc milling machine used for sale

Manufacturer: FAMUP Year: 1998 Type: CNC vertical machining center Numerical control: Heidenhain 410 AC.Strokes : X 1000 mm / Y 470 to 600 mm / Z 470 to 600 mm (according to documentation) Table: 1300 x 520 mm – T-slots 5 x 18 mm (pitch 100 mm) – max. load 800 kg Spindle: ISO 40 DIN 69871 – AC Brushless – 50 to 8000 rpm – 11 kW (30 min) / 7.5 kW S1 Feeds: X/Y/Z 10000 mm/min – X/Y/Z 30000 mm/min fast tool magazine: 24 positions – max. tool diameter 94 mm – max. length 280 mm – max. weight 6 kg – changeover time 3 s Equipment: without spindle center coolant, without chip conveyor, sold without tools Dimensions: 4247 x 3105 x 3310 mm Weight: 6000 kg Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-221

CNC vertical machining center for machining metal parts. CNC control: Fanuc 0M Strokes: X 850 mm / Y 440 mm / Z 630 mm Table: 940 × 400 mm Max. table load: 250 kg Spindle taper: BT 40 Spindle speed: 45 – 8,000 rpm Spindle motor power: 7.7 / 5.5 kW Tool changer: 22 positions Projection: 380 mm Total power: 10 kVA Voltage: 380 V Auction-ID: A1-46647-240

CNC Control: FANUC 0M (original manual) Number of axes: 3 Axis strokes: X 1100 mm / Y 650 mm / Z 800 mm Maximum spindle speed: 8000 rpm Cooling: with coolant Spindle taper: BT40 Tool changer: automatic, 30 stations Year: 1994 Manufacturer: SUPERMAX Auction-ID: A1-46647-269

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-46647-237

Simodrive 611 LT Modul Int.200A. Includes additional module 6SN1118-0DG21-0AA0 (Version E). Industrial CNC drive component. Made in Germany. Auction-ID: A7-46756-451

Capabilities: Maximum turning diameter: 420 mm (standard 290 mm) Maximum turning length (Z-axis): 635 mm Bar passage: 65 mm Spindle Bore: 79 mm Spindle: Rotational speed: 25 to 5,000 rpm Power: 21 kW (100%) / 28 kW (40%) 3-jaw hydraulic chuck (Ø approx. 200–250 mm) Turret & tooling: Sauter Turret VDI 30 (DIN 69880) Capacity: 12 stations Motorized substations C-axis (pin indexing) CNC Control: Heidenhain Turn Plus Electrical data: Power supply: 400 V / 3~ / 50 Hz Installed effective power: 44 kVA Current rating: 64 A Protection: 80 A Auxiliary voltage: 230 V Control voltage: 24 V DC Auction-ID: A1-46647-262

Machine: CNC machining center MASTERWOOD 4 WIN Year: 2010 Running axes: X 4960 mm, Y 1930 mm, Z 650 mm Digital axes: 4 + C-axis Electrospindle: 17 kW HSK63E with dimmer, dedicated cooling Tool Magazines: 10 pos. head, 16 pos. rear carriage, 18 pos. lateral Fixed heads: blade holder Ø220 + Ø350 mm HSK63F Table: 7 bar auto Belt: chip evacuation Order: Multilingual PC + Masterwindows software, mobile console, handheld remote control Security: EC Dimensions: 6800 x 2450 x 2450 mm Weight: 4300 kg Available from the beginning of November. Auction-ID: A1-46801-42

Machine: BIESSE CNC machining center Table: 3060 x 1260 x 150 mm Solenoid Spindle: 12 kW, ISO30 Cone Tool changer: 10 positions Vacuum pump: 100 m³/h Consoles: 6 with 3 ATS suction cups Drilling Head: 15 Vertical + 4 Horizontal Pins X Saw: Ø125 mm Accessories: 4-position flange, bevel gearbox, flange for aggregates Equipment: chip recovery belt, Biesse WORK software, B_NEST Auction-ID: A1-46801-23

Manufacturer: YAMAZAKI MAZAK Model: Quick Turn 20 Year: 1997 CNC Machine: Mazatrol T Plus Axes: 2 Axes (X, Z) Capacities: Max. diameter above bed: Ø 300 mm Distance between points: 446 mm X-axis stroke: 180 mm Spindle: Bore: 61 mm Max. speed: 4500 rpm Motor power: 15 kW Turret: 8 positions Dimensions per machine: 2660 x 1520 x 1879 mm Unit weight: approx. 4170 kg (total batch weight approx. 8340 kg) Condition: used Auction-ID: A1-46647-261

Power consumption 34 kVA, current consumption 63 A, rapid traverse X-axis 5 m/min, rapid traverse Z-axis 10 m/min, tool changer A with 8 stations, tool change B with 8 stations, incl. accessories Auction-ID: A1-46781-2

CNC vertical machining center for machining metal parts. CNC control: Heidenhain TNC 410 Axes: 3 axes Strokes: X 1,020 mm / Y 610 mm / Z 560 mm Table: 1,400 ×,650 mm Maximum load table: 2,000 kg Spindle taper: BT 40 Spindle speed: 10,000 rpm Spindle power: 15 kW Tool changer: 40 positions High-pressure coolant: 20 bar through spindle Equipment: Chip conveyor, 2 augers, spindle cooling, closed cab, machine lighting Auction-ID: A1-46647-247

CNC vertical machining center for machining metal parts. Axes: 3-axis Strokes: 610 x 410 x 450 mm Numerical Control: Fanuc OT Equipment: Chip Conveyor Manufacturer: Yang Iron Works Co., Ltd.Country of Manufacture: Taiwan Serial No.: Z00321 Auction-ID: A1-46647-239

Lot of 12 Kennametal KM32 modular quick-change tool holders for CNC lathes. Auction-ID: A7-46756-226

CNC Vertical Machining Center Order: Heidenhain TNC 426 Axes: 3 Table (mm): 1100 × 600 X/Y/Z strokes (mm): 1000 × 600 × 800 Spindle: ISO 40, max. 8,000 rpm Tool magazine: 40 positions Equipment: Chip conveyor Serial number: Notes: Used machine, Auction-ID: A1-46647-260

2-axis CNC lathe with HAAS CNC Manufacturer: HAAS Model: HL-2 Year: 1997 Serial Number: 61212 Max turning diameter: 508 mm Max turning length: 610 mm Spindle Bore: 76.2 mm Max spindle speed: 3750 rpm Turret: 10 positions CNC Control: HAAS CNC Power supply: 360 / 480 V – 3 phases – 50/60 Hz Dimensions approx. (L x W x H): 3200 x 1778 x 1778 mm Weight approx.: 4082 kg Auction-ID: A1-46647-263

Manufacturer: INDEX Year: 2005 Type: Moving spindle CNC lathe with motorized tools and C-axis Numerical control: Siemens Sinumerik 840D Powerline Chuck: Ø 160 mm Max. rotation diameter: Ø 180 mm Strokes: X-axis 520 mm / Z-axis 200 mm Fast feeds: X/Z 40 / 30 m/min Moving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 Nm C-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30 Motorized tools: up to 6,000 rpm – 8.5 kW Power supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kW Weight (kg): approx. 4500 Auction-ID: A1-46647-273

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Counter-spindle power: 3.7 / 5.5 kW Counter-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Serial No.: 1105-02957 Auction-ID: A1-46647-238

Technical details Serial number: 1000039423 Power: 21 kW Voltage: 400 VAC Full load current: 36 A Air supply: 6.5 bar Suction flow rate: 30 m/sec Dimensions: 5300 × 2300 × 2300 mm Weight: 2,500 kg Condition: Used (very few working hours) Additional notes: For further technical information, please refer to documents 1-01.pdf, 1-02.pdf and 1-03.pdf Auction-ID: A7-40554-1

Machine type: CNC Die Sinking EDM Manufacturer: Sodick Model: AM35L Control: Sodick LN / LN1 control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 600 x 400 mm Axis travel (X/Y/Z): approx. 350 / 250 / 250 mm (typical for model) Process type: Die sinking EDM Generator: Sodick generator Tank: Integrated dielectric tank Control system: Sodick LN1 control with external monitor (KME) Data input: Floppy disk (2DD) interface Cooling system: External oil temperature regulator (Kanto Seiki Oilmatic) Pump system: Integrated dielectric pumps Accessories: Oil temperature unit, dielectric system, control unit Remarks: Machine in used condition. Control boots (system loading visible). Typical signs of use and dirt/oil residues. Equipped with external oil temperature control unit and dielectric system. Own mass: approx. 3,500 kg Dimensi ...

Machine type: CNC Vertical Machining Center Manufacturer: Tongtai Model: TMV-720A Control: Heidenhain CNC control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 900 x 400 mm Spindle: Vertical spindle Tool holder: SK40 (visual assumption) Tool changer: Yes, side-mounted tool rack Number of tool holders: approx. 20+ pcs included Coolant system: Yes, internal coolant nozzles Chip management: Chip conveyor installed Coolant unit: External filtration unit (Granch Filtration) Control panel: Heidenhain with manual pulse generator (MPG) Emergency stop: Yes Status light: Yes Accessories: Tool holders, coolant system, filtration unit Remarks: Machine in used condition, signs of wear and coolant residues visible. Control boots and initializes. Includes multiple tool holders and external coolant filtration system. Own mass: approx. 5 ...

Make: Big-Plus (Taiwan) Type: CNC Vertical Machining Center Model: 850 VMC Serial number: BM110CE01 Control: FANUC Series 0i-MD Technical data: - X / Y / Z travel: approx. 850 mm / 500 mm / 500 mm - Table size: approx. 1000 x 500 mm - Spindle speed: 10,000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: approx. 6–8 kg/cm² Equipment: - Vertical spindle (Big-Plus spindle system) - Tool changer (carousel type) - Coolant system - Enclosed working area with sliding door - Manual pulse generator (handwheel) Control panel: - FANUC interface with display and full keyboard - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-49

CNC-controller Delem DA-65R, bending pressure 1100kN, working lenght 3100mm, capacity - 7,5kW, voltage - 3PH 380 Volt, hydraulic oil - 120l Auction-ID: A7-46486-1

Hours in picture. 1999 DMG (Deckel Maho) DMU 80 T is a high-precision CNC universal milling machine. It was a staple in toolrooms and production shops at the turn of the millennium because it bridged the gap between a standard 3-axis mill and a full 5-axis machining center. In the late 90s, the "T" series stood for "Table," featuring a large fixed table with a swiveling milling head, making it incredibly versatile for large or heavy workpieces Find more here - / Contact us at -

Make: Dugard Type: CNC Vertical Machining Center Model: Eagle 1000 VMC Serial number: MC97BF06 Control: FANUC Series 0i-MC Technical data: - X / Y / Z travel: approx. 1000 mm / 500 mm / 500 mm (typical for model class) - Spindle speed: 8000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: 5–6 kg/cm² Equipment: - Vertical spindle - Tool holders included (side mounted rack) - Coolant system - Manual pulse generator (handwheel) - Enclosed working area with sliding door Control panel: - Full FANUC keyboard and display - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-48

Type: CNC Vertical Machining Center Brand: EMSIL Techtrans Model: DMC2100H Control: FANUC Series 18i-MB Machine Type: Super Vertical Machining Center Axes: 3-axis (X / Y / Z) Equipment: - Enclosed working area with sliding doors - Large T-slot worktable - Automatic tool interface (tool holder included) - CNC control panel with screen and full keypad - Emergency stop - Coolant system with adjustable nozzles - Electrical cabinet integrated - Status signal tower (stack light) Displayed Data (at time of inspection): Run time: approx. 19,568 h Part count: 84,933 Condition: Used Remarks: Alarm displayed (pressure low); machine not tested; sold as seen Auction-ID: A7-45993-78

CNC control MORI SEIKI MSX-501, 2 turrets with 16 tool positions each, driven tools, 2 spindles, bar passage 52 mm, max. speed 6000 rpm, max. turning diameter 190 mm, max. turning length 450 mm, Y-axis +/- 40 mm, machine weight 5,100 kg, chip conveyor

consisting of: CNC lathe EMAG VL3 DSL, BJ. 2012, Ser. No. 103899 and CNC lathe EMAG VLY , BJ. 2012, Ser. No. 10390, each CNC control SIEMENS SINUMERIK, robot loading system with loading robot FANUC M10iA, BJ. 2012, each machine with WW ME-FI 600 filter system, Sermeto HENNIG 30 S chip extraction, EMAG cooling unit, coolant device, workpiece conveyor system and hand control panel

Fanuc 18i-T, live tooling, sub-spindle Max turning diameter: 390 mm Recommended turning diameter: 170 mm Max bar capacity: 65 mm X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° Chuck size: 210 mm Spindle nose: ASA A2-6 Spindle bore: 76 mm Spindle motor power: 15/11 kW Rapid traverse X/Z: 20/25 m/min Turret positions: 12 Bar capacity: 65 mm Coolant pump motor: 0.24 kW Electrical requirement: 25 kVA Machine height: 1740 mm Machine weight: 4240 kg Control system: FANUC FS18T-C / FS16T-C Auction-ID: A7-46053-17

Supply voltage: 380 V Phase: 3P Frequency: 50 Hz Rated capacity: 46 kVA Full load current: 70 A Largest motor rate: 129/10 A Interrupt capacity: 15 kA Diagram No.: W6000-270/-247-6 Serial number: 0317 Made in Japan by OKUMA Corporation Maximum machining capacity: 1000 × 800 × 810 mm Maximum workpiece size: 939.37 × 810 × 810 mm X-axis travel: 1000 mm Y-axis travel: 800 mm Z-axis travel: 810 mm Spindle center to table: 200–1010 mm Spindle end to table center: 87.8–976 mm Table pallet size: 630 × 630 mm Index positions: 360 positions Maximum table load: 1200 kg Spindle speed range: 50–10000 rpm Spindle taper: NT No.50 Spindle diameter: Ø110 mm Rapid feedrate (X/Y/Z): 30000 mm/min Jog feedrate: 1–20000 mm/min 4-axis horizontal machining center Auction-ID: A7-46053-25

Control: Siemens Sinumerik 840D,Filter system: KNOLL KF 400, year of manufacture 2018, chip conveyor Auction-ID: A7-46802-1

Model: Rover 24XL Serial Number: 32495 Working range X: 6170 mm Working range Y: 1380 mm Working range Z: 155 mm Main motor: 7.5 kW Max rotation speed: 24,000 rpm Tool change positions: 7 Vertical drill bits: 14 Horizontal drill bits X: 4 Horizontal drill bits Y: 2 Worktop: 10 bars, 4 trolleys per bar Suction cups: also included, in good condition, spare Plane positioning: automatic Vacuum pump: Busch MM1252 AV Chip conveyor belt Auction-ID: A7-46828-1

Fanuc 21i-M control, enclosed VMC Spindle taper: BT40 Spindle speed range: 72–10000 rpm Spindle motor power: 5.5/3.7 kW Pull stud bolt type: MAS-P40T-1 Number of tools: 20 Maximum tool weight: 5 kg Maximum tool diameter: 100 mm Maximum tool length: 250 mm Tool change time (T-T): 1.2 sec Tool change time (T-C): 2.8 sec Pallet change method: Turning-table method Pallet change time: 4 sec Drilling capability: Ø22 mm Tapping capability: M18 Milling capability: 20 cc/min Machine weight: 4000 kg NC device: FANUC 21i-MA Auction-ID: A7-46053-21

CNC milling machine Type: BT 1500 Manufacturer: Style Year: 2012 X: 1500 mm Y: 650 mm Z: 600 mm Max spindle speed: 8000 rpm With accessories Machine weight: 4300 kg Machine in good condition, under power. Find more here - / Contact us at -

A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible.

Excellent condition - Fully operational - Loading / Transport possible! Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 14 kVA Rated current: 20 A Travels (axes stroke): X1: 170 mm Z1: 200 mm X2: 110 mm Z2: 395 mm X3: 110 mm Z3: 170 mm Y: +/-40 mm Rapid traverse speed: X1: 24 m/min Z1: 24 m/min X2: 18 m/min Z2: 24 m/min X3: 20 m/min Z3: 24 m/min Y: 12 m/min Max. Shank diameter of the tool with the tool holder driven: Drill shank cutter Tap: diameter 7 mm, diameter 10 mm, diameter 13 mm, diameter 63 x diameter 16 mm for slotting cutter. Max. Tapping diameter of the rotating tool: M10 Tool spindle speed: 45 - 4500 rpm Max. clamping diameter of counter spindle: 42 mm Max. workpiece length for front side machining in counter spindle: 120 mm Max. workpiece length projection from counter spindle: 80 mm Max. Axial tap ...

Excellent condition - Fully operational - Loading / Transport possible! • CNC hydraulic press brake • Total installed power 12.50 KW • Maximum bending force 1300 KN (132 T) • Maximum pressure 300 Bar • Maximum working length 3140 mm • Maximum distance between uprights 2700 mm • Throat depth 420 mm • Maximum stroke 200 mm • Table width 90 mm • Approach speed: 1 - 100 mm/sec • Working speed: 1 - 10 mm/sec • Return speed: 1 - 100 mm/sec • AMNC control • Various accessories are included • Transport dimensions 5000 x 2060 x 2850 mm

Excellent condition - Fully operational - Loading / Transport possible! new drive boards (from 2020), 12-fold tool changer (driven), driven C-axis, VDI30, tailstock programmable, tool measuring arm T18, oil mist extraction, Chip Conveyor, high pressure pump, Turn Plus (graphic programming), control: HEIDENHAIN turning diameter: 570mm, turning diameter over bed slide: 420mm

Specifications Manufacturer: WAFIOS Model / Type: BMZ 42 Machine Number (SN): 27681075 Year of manufacture: 2015 Plan number: 7681 2 9000 75 Power supply: 3~400V Frequency: 50Hz DC Control Voltage: 24V DC AC Voltage: 230V AC Rated Current: 11A Protection: 25 A Equipment Pipe feeder Buffer Unit Workpiece Reception System Pipe Rotation Unit Bending module Workpiece Placement System Output tape Mesh Fence Light barrier system Separate operator terminal Monitor and remote control Workshop cabinet with sliding door Workshop trolley with 5 drawers Hand tools and additional equipment included Pipe diameter: max. 12.7 × 1.5 mm with a tensile strength of max. 600 N/mm² Rod Length: 150-2000 mm Bending head stroke (Z axis): up max. 25 mm down max. 120 mm

CNC Lathe Spinner TC67H-MC Year of Make: 1997 Facilities Tailstock Chip conveyor High Pressure Pump Food Powered tools Technical data Control: Siemens 840 D X-travel: 221 mm Z-travel: 590 mm Turning diameter: 300 mm Turning length: 600 mm Speed: 4,500 1/min Auction-ID: A1-46872-12

CNC Control: Siemens 828D Table dimensions: 750 x 400 mm X/Y/Z strokes: 600 / 400 / 450 mm Spindle speed: 10,000 rpm Spindle power: 7.5 / 15 kW Spindle nose: SK40 / SA40 Tool magazine: 24 positions Max. tool diameter: 80 mm Max. tool length: 280 mm Max. tool weight: 8 kg Fast feed: 48 m/min Positioning accuracy: ±0.003/300 mm Repeatability: ±0.003 mm Power supply: 400 V, three-phase, 50/60 Hz Options: Rigid tapping, Ethernet/USB, 20 bar IKZ spindle center coolant, electronic crank, spindle cooler Year: 2018 Manufacturer: Priminer Serial No.: PR8318 Dimensions (mm): 2530 x 1800 x 2350 Weight (kg) : 3500 Auction-ID: A1-46647-274

CNC lathe GILDEMEISTER NEF 400 Year of Make: 2005 Control: Siemens 840 D Technical data Turning length: 650 mm Circumferential diameter over bed: 400 mm Circulation diameter over face slide: 270 mm Spindle bore: 65 mm Flat travel (X): 220 mm Longitudinal travel (Z): 700 mm Max. main spindle speed: 4,000 rpm Tool turret: 8-speed Machine weight: approx. 3,175 kg Auction-ID: A1-46872-25

Heller MCH 250 4 axes Year of Make: 2006 Control: Siemens 840 D Technical data Spindle speed: 12,500 rpm Travels X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Max. tool length: 600 mm Auction-ID: A1-46872-55

CNC lathe Angelini Oscar Year of Make: 2003 Control: GE Fanuc Series 21i-T Technical data Permissible diameter on the slide: 320 mm Recommended turning diameter: 220 mm Maximum turning diameter: 320 mm Turning length with chuck: 600 mm X-axis travel: 270 mm Travel Z-axis: 720 mm C-axis: available Tool turret: 12-speed VD30 Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 32 m/min Spindle nose: ASA 5\" Spindle bore: 61 mm Bar Passage: 52 mm Power spindle motor: 15 kW Maximum spindle speed: 4,500 rpm Diameter hydraulic chuck: 210 mm Tailstock quill diameter: 70 mm Tailstock quill stroke: 190 mm Collet chuck: available Dimensions (L x W x H): 402 x 130 x 199 cm Weight: 4,500 kg Auction-ID: A1-46872-34

CNC Lathe Technical details CNC control: Fanuc 21 i-T Circumferential diameter: 415 mm Turning length: 600 mm Speeds: up to 4,500 rpm Spindle power: 15 kW Number of turrets: 11-speed Machine Details Weight: 4,000 kg Facilities Ejector Substitute Occupational Benefit Institution Tools Motorized Automatic Tailstock Auction-ID: A1-46872-26

LID MAHO DMC 60 H Year of Make: 1997 Control: Siemens 810 D Technical details X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° Control: Siemens Number of pallets: 2 Pallet size: 400 x 500 mm Permissible load per pallet: 600 kg Machine Details Weight: 10,500 kg Auction-ID: A1-46872-47

CNC Control: Siemens 828D ShopMill Courses X/Y/Z: 1220 / 600 / 610 mm Total power: 10 / 14 kW Spindle speed: 8,000 rpm Spindle taper: SK40 Tool magazine: 20 positions Equipment: Chip conveyor, coolant, technical documentation Power supply: 400 V – 50 Hz Manufacturer: Huron Year: 2012 Serial number: M02741 Estimated dimensions (mm): 3500 x 2800 x 3200 Weight (kg): 10000 Auction-ID: A1-46647-275

LID MAHO DMU 125 T hi-dyn 3-axis CNC universal machining center Control: Heidenhain MillPlus Year of Make: 2002 Powerful and robust 3-axis machining center from DECKEL MAHO. Ideal for complex milling operations in tool, mould and machine construction. Travels • X-travel: 1,250 mm • Y-travel: 880 mm • Z-travel: 800 mm Main spindle • Speed range up to 18,000 rpm⁻¹ • Drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Work table • Table clamping surface: 1,500 × 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool Changer • 30 tool positions • Max. tool diameter: 80 mm • 160 mm with free adjacent position • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total weight in the magazine: 100 kg Feeds • Rapid traverse  ...

CNC lathe MAZAK SUPER QUICK TURN 200 Year of Make: 2000 Workspace Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to diameter: max. 51 mm Main spindle Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inches Spindle bore: 61 mm Tool turret Standard version: 12-speed Travels X-axis: 190 mm Z-axis: 535 mm Auction-ID: A1-46872-44

Type: CNC vertical machining center Manufacturer: Mikron / Haas Model: VCE 2000 / LCE 1100 Control: Haas CNC control system Year: 2000 Serial number: 18418 Tool changer: Automatic carousel tool changer Spindle taper: SK / ISO tool holder system Machine configuration: Traveling column vertical machining center Coolant system: Integrated coolant and chip evacuation system Chip conveyor: Integrated auger chip conveyor Voltage: 360 / 480 V Frequency: 50 / 60 Hz Table dimension 800 x 3100 mm; Lift crane not included; pack of tools included - as shown in the photo Remarks: Signs of normal industrial wear and usage visible Auction-ID: A7-45993-172

Vertical lathe Gildemeister CTV 250 Technical details Chuck diameter: 250 mm X-axis: 800 mm Z-axis: 300 mm Spindle Spindle head: 170 h5 Spindle diameter in front bearing: 120 mm Spindle bore: 79 mm C-axis Number of workstations: 12 Auction-ID: A1-46872-36