cnc mill used for sale

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-8

chuck: 380 mm : Vierte Achse weight of the machine ca.: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm /  ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.

Stock number: R1237, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mill, Standing: Table model, Motor: 2,2 kW - 230 Volt - 1500 rpm., Theoretical capacity: 50 kg/h., Dimensions inlet: Funnel Ø 250 mm., Dimensions outlet: 50 x 70 mm., Model: 2200, Type: Grain Grinder, Other: Variable slot width

Travel X/Y/Z: 800mm/400mm/440mm, table dimensions X/Y: 1285mm/355mm, quill stroke: 130mm, weight: approx. 2100kg. An on-site inspection is possible.

Key data: 500 mm, 400 , 400

Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!

Travel X/Y/Z: 800mm/500mm/200mm, table dimensions X/Y: 1400mm/300mm, feed rate: 2m/min, quill stroke: 200mm, spindle taper: SK40. Machine dimensions X/Y/Z: approx. 2100mm/2300mm/2600mm, weight: approx. 2100kg. An inspection on site is possible.

Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible.

A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible.

Stock number: R1240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Toothed colloid mill, Standing: On leg console with wheels, Head size: Ø 100 mm., Motor: 4,05 kW - 415 Volt - 2800 rpm., Dimensions: L 400 x W 250 x H 700 mm., Total height: 1270 mm., Dimensions inlet: Ø 35 mm., Dimensions outlet: Ø 35 mm., Manufacturer: Fryma, Model: MZ-100/R, Year: 1972, Other: Variable slot width

Manufacturer: HAAS Model: VF-2SSHE Year of Manufacture: 2007 Electrical Specifications: Voltage: 360–480 V Phase: 3 Frequency: 50/60 Hz Current Ratings: Full Load Current: 40 A Largest Load: 70 A Short Circuit Interrupting Capacity: 10,000 A Certification: CE Find more here - / Contact us at -

boring spindle diameter: 130 mm taper: ISO 50-7388/1 milling spindle diameter: 200 mm direct current motor: 22 kW : 10-1600 U/l rapid traverse: der Achsen 6000 m/min z-axis: 800 mm y-axis: 2100 mm x-axis: 3000 mm w-axis: 1500 mm Size of table plate: 1250 x 1500 mm table movement: max. 10000 KG kW : im Eilgang 3,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

technically efficient, ready to work – after full service motor power: 2.2 kW cutter diameter: 250 mm milling angle: +45° / 90° / -45° pneumatic profile clamping cooling and lubrication system compressed air preparation station

For sale is a MAHO MH 600 P universal tool milling machine with Heidenhain TNC 135 control. The machine comes from German quality production and is ideal for toolmaking, single part and small series production as well as training companies. The milling machine is robustly designed, precise and versatile. The universal design allows both horizontal and vertical machining to be carried out. Technical data: Manufacturer: MAHO Werkzeugmaschinenbau Model: MH 600 P Control: Heidenhain TNC 135 Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table size: approx. 250 × 1000 mm Spindle speed: approx. 50 – 2500 rpm Feed: infinitely variable Connection voltage: 220 / 380 V, 50 Hz Machine weight: approx. 1,900 kg Equipment: Universal milling head Automatic feeds Heidenhain Digital Display / CNC Control TNC 135 C ...

1 used: Universal milling machine, used • Manufacturer: Klopp • Model : FW 11/4 • Year of manufacture: unknown approx. 1970 • Table clamping surface: 1100 x 300 • Spindle mount: SK 40 • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12-340 mm/min Accessories: Various holders and milling cutters, 1 set of collets Hydraulic vise with pneumatic support bolts Vise jaw width 160 mm

Bead mill VMA Getzmann Dispermat SL50-C Power 3 kW Speed range 0-6000 1/min Grinding chamber volume 0.5 l Bar temperature sensor Very good condition, straight from production

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992

Key data: 110 mm

HBM HWCa-110, new in 1965

For aluminium and PVC profiles Max. cutter diameter: 180 x 30 mm Max. profile height: 95 mm Stroke: 325 mm Pneumatic material tensioners Manual feed Minimum quantity spraying Weight: approx. 150 kg

Max. workpiece diameter... 1000mm Module ... 10- Main engine power ... 7.5kW L x W x H ... 3120 x 1870 x 2525mm Machine weight ... 10000kg

Milling cutter diameter 250 mm Max. milling depth: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Table extensions  Table length 240 cm  Swivel range -10+45 Max. spindle protrusion 175 mm Motor 7.5 kw Weight 950 kg Compressed air 6 bar

Swivel spindle milling machine  Table width with carriage 900 mm  Work table 1000 x 550 mm Carriage 1150 x 350 mm Spindle diameter D30 mm Swivel range 90-45 Height adjustment spindle 175 mm Working height spindle 125 mm Max. tool diameter  for profiling D 180 mm for slitting D 250 mm Engine 3 kw / 4 hp Speed. 1400-3500-6000-8000 rpm Weight approx. 400 kg

Table milling machine with extended tables

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)

Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible.

General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional

Stock# UG6393 Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work on profiles. Rotor has bolted 12 knives, on side walls of milling chamber there are bolted two static knives. Bottom discharge via screen (10 mm) through blower, cyclone into the collection station.

T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg

A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 10,500 mm Y-axis travel: 1100 mm Travel Z-axis: 655 mm B-axis swivel angle: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Barcode scanners and label printers Metal chip conveyor Angle head for machining from below Suction for cabin Pendulum operation through two light barrier areas Manual control panel Spindle hours: approx. 7500 Loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg

HBM type Knuth BO110,Table size: 1100 mm x 960 mm with tail stock and face chuck

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 990 mm, 390 mm, 590 mm

For sale is a robust and powerful universal milling machine of the brand DECKEL, type FP33. The machine impresses with its high stability, generous travel distances and SK50 tool holder – ideal for workshops, maintenance or manufacturing companies with high requirements. Technical data: Manufacturer: DECKEL Type: FP33 Tool holder: SK 50 Travels:  • X = 990 mm  • Y = 390 mm  • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3300 x 2500 x 2000 mm ⚙️ Condition & Notes: Good general condition (more details on request) Delivery: Loading on truck possible Viewing possible by appointment

Milling machine Manufacturer: Reckermann TYPE: Delta 1300 Year of Make: 1990 Working distances: 1000x400x450 Spindle speed 4500 rpm Feed speed 1000/min. Power 27kW Weight 5,000KG Automation No Accessories Paper Filters Works flawlessly

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible.

A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible.

Winkelanlage Schneider Type: SK-Z3 Milling spindle Diameter 30 mm; motor with 4.8/5.6 kW and 1450/2900 rpm Spindle clamping length 150 mm Tool diameter maximum 200 mm Table size 1150 x 850 mm Extendable table support length 2000 mm Slotted spindle Diameter 40 mm; motor with 4.6 kW and 2830 rpm Spindle clamping length 130 mm Cross-cut saw with carbide-tipped saw blade; Motor 3 kW and 2860 rpm Tenon table Dimensions 780 mm x 330 mm With stop rail, with pneumatic workpiece holder Travel 2000 mm 3 suction connections 1 milling fence with fine adjustment, DBGM SH-System 90/1 from S. Hoomann GmbH with 3-roller feed Dimensions Dimensions 3100 mm x 2000 mm x H 1500 mm Weight 1200 kg Packing Dimension 1 pallet 2000 mm x 2200 mm x H 1500 mm Weight approx. 1000 kg 1 pallet 1200 mm x 800 mm H 1000 mm Weight approx. 200 kg

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Tenon cutting and slitting machine Hemag With automatic table feed Type: ZR 351 -Cross-cut saw motor power 2.2 kW Saw blade diameter 420 mm Cutting height maximum 120 mm -Slotted spindle motor power approx. 4 kW Spindle diameter 40 mm, spindle clamping length 180 mm Tool diameter maximum 350 mm Sliding carriage with automatic feed motor 1 kW max. tenon length 145 mm max. slot depth 145 mm max. wood thickness 200 mm max. wood width 400 mm Machine dimensions: L 2200 mm x W 2300 mm x H 1800 mm Weight: 1850 kg

A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.