cnc mill used for sale

Millipore IsoPak STS, System equipped to pack and unpack columns for Millipore K Prime Biochromatography system year of manufacturing 2000

Millipore K-Prime III Biochromatography system for cleaning and separation of proteines, biotechnology products, antibodies etc. The System is GMP-conform. floating rate 1-10 l/min, nominal pressure 7 bar, UV-H and LF Messuring after column, fraction sampler valves The System is consisting of corrosion-resistant materialials like lastic and Hastelloy-C.

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

Iddon Two Roll Mill 6” diam. x 12” wide Fully guarded and interlocked

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

MARCHESINI FILLING MACHINE, MODEL MI 200 D.I. Year of construction: 2011 Automatic double-channel linear filling machine for plastic tubes. A great choice for packaging cosmetic and pharmaceutical products. Usable in sterile environments. The customization allows for the maximum production flexibility. possibility of simultaneous installation of different closure systems (metal and hot air) multiple feeding options and adjustable format change via HMI OUTPUT up to 200 pieces/min PRODUCT RANGE Dosage range: 1 - 320 ml Tube height with cap: 50 - 250mm Tube diameter: 11 - 50mm ELECTRICAL CHARACTERISTICS Nominal voltage: 3x400v +N+PE Frequency: 500 Hz 6 kA 18 A OTHER CHARACTERISTICS Weight: 3800 kg

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Miller TR 104 2 colors with perfector. color Control panel(Pult), 75 mil, roller and cylinder are without damage

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):

Tagential Flow Filter System Manufacturer: Millipore Model Cogent M1 Year of construction 08/2019 Functionality: Tagential flow filtration for process development, scaling studies and small-scale production Capacity: processes volumes from 300 ml to over 100 L Cassette support: up to 5 Pellicon 2 or 3 cassettes, total membrane area up to several m² Control: automatic transmembrane pressure (TMP) and differential pressure control (DP); Control modes include constant DP and constant TMP Flow rate: Maximum 4.5 L/min at 5 bar gauge pressure Materials & Design: Stainless steel components designed for clean-in-place (CIP) and compatibility with high process temperatures User interface: intuitive, multilingual touchscreen Data processing: Data collection can be uploaded as CSV files Operating conditions: voltage 220-230 V, frequency 50/60 Hz, operating temperature range 4 °C to ...

Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, inductive displacement sensor, display unit, measuring indicator -Manufacturer: Mahr Feinprüf, millitron display unit -Type: 1222 -Quantity: 1x measuring probe available -Dimensions: 200/150/H260 mm -Weight: 3.5 kg

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.’ � ...

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double head lathe for milling and turning tubes Automatic (un)loading of workpieces nbsp;

Max. paper size: 720x1040mm, min. paper size straight printing: 360x520mm, straight/reverse printing: 440x520mm, paper thickness: 0.06-0.5mm, max. print size straight printing: 710x1030mm, straight/reverse printing: 700x1030mm, max. throughput straight printing/ straight/reverse printing: 7000/ 5000 sheets/h, printing plate size (recommended): 790x1045mm, print start: 48mm, print-free gripper margin: 10.5mm ±1mm. Equipment: Miller TP 104 basic machine with two printing units, perfecting device between the first and second printing unit, numbering tower with control for Zeiser and Leibinger mechanical numbering units (without numbering units), Spiess TP 104/1 sheet feeder, load: 10,000N. Remote adjustment via control console: colour control 1st and 2nd printing unit, fine adjustment of circumferential and lateral register: ±1.5mm, plate cylinder, 2x plate clamping rails at the front - s ...

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

Key data: 2000 mm, 500 mm, 550 mm

Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

General SKU360U945 MakeMillipor Ultra Filtration LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4404 (316L) With jacketcheck General No.F0PA48268 Year of construction2011 Mounted on wheelsSkid Floor space1,98x1,25 m Total height2,85 m Extra SpecificationsTank volume 261 ltr, fluid steam, working pressure -1/3 bar, test pressure 5,5 bar, work temp 135°C, with Wright flow &:nbsp:pump, type SLBS/0081, 0,75 kW, 15 bar, Waukesha pump unit, type SLEL/1099, 5,5 kW, 10 bar, Millipor filter elements, type CUF01, Endress+Hauser flow valvesMiscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU360U950 MakeMillipor Ultra Filtration LocationBarneveld CEcheck TypeRVT0 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Vacuumcheck Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4401 (316) With jacketcheck General No.15843 Year of construction1998 Mounted on wheelsSkid Floor space2,075x1,250 m Total height2,860 m Extra SpecificationsTank volume 250 ltr, fluid steam, working pressure 2 bar, design pressure -1/3 bar, test pressure 4,2 bar, design temp 135°C, with Waukesha pump, type 006U2, 0,55 kW, Waukesha pump unit, type 060U2, 5,5 kW, Millipor filter elements, type CUF01, Endress+Hauser flow valves, Gemo valves, 2-doors control cabinet with B&:amp:R touchscreen controlMiscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in worki ...

General SKU237S132 MakeMillipore Process system (Fr) TypePSKUF 20/4/3 No.MSP007665 Year of construction2004 Mounted on framecheck Pressure Working pressure0.45 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Max. temperature-10-110 degr. C With stirrer:magnetic stirrer: With jacketcheck Miscellaneous filters Filtercheck Filter surface20 m² MaterialStainless steel 1.4404 (316L) General LocationBarneveld With switchgear(as is) Floorspace2,0x1,9 M Total height2,7 M Weight1550 Kg CEcheck Extra SpecificationsThe process boiler has a gross volume of 200 liters. (nett. 160 ltr.)The filter plates are not mounted. the type of plate that has been in this device is the Prostak PLAC 1kD consisting of 12 elements with a total filter surface of 20.4 m2Miscell ...

General SKU293X395 LocationBarneveld CEcheck MakeMerck Millipore TypeMobius Pod Cart 2 levels Pressure Working pressure3.4 Bar Main Features MaterialStainless steel Pressure124 Bar Surface1.1 m2 Specified Features - Filterpress Filter presscheck Filter surface5x 0,55 m², 1x 1,1 m² Internal platen sizes470x260 mm External platen sizes550x310 mm Central inlet300 mm Manual operated closing2x Enerpac Manual openingcheck MaterialStainless steel 1.4301 (304) Information No.F0BN35875POD Year of construction2020 Mounted on wheelscheck Floorspace1,70x0,80 m Total height1,17 m Extra SpecificationsMax inlet pressure 3,4 bar for :ultra filtration FilterpressesMerckFilters > FilterpressesBrand > Merck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU293X468 MakeMillipore LocationBarneveld TypeQuick Scale Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter Filtercheck MaterialGlass, Stainless steel 1.4552 With jacketcheck General No.QS100-1432 Year of construction2022 Mounted on wheelscheck Floor space0,55x0,55 m Total height1,75 m Weight34,1 kg Extra SpecificationsVolume 4,3 l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1,with pressure gauge.Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X470 MakeMillipore TypeQuick Scale No.QS100-1426 Year of construction2021 LocationBarneveld Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter Filtercheck MaterialGlass, Stainless steel 1.4552 With jacketcheck General Mounted on wheelscheck Floor space0,55x0,55 m Total height1,75 m Weight34,1 kg Extra SpecificationsVolume 4,3 l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1,with pressure gauge.Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X471 MakeMillipore LocationBarneveld TypeQuick Scale Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter Filtercheck MaterialGlass, Stainless steel 1.4552 With jacketcheck General No.QS100-1427 Year of construction2021 Mounted on wheelscheck Floor space0,55x0,55 m Total height1,75 m Weight34,1 kg Extra SpecificationsVolume 4,24 l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1,&:nbsp:with pressure gauge.Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X472 MakeMillipore LocationBarneveld CEcheck TypeQuick Scale Main Features MaterialStainless steel/Plastic Specified Features - Miscellaneous filter Filtercheck MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 With jacketcheck General No.QS70-0046 Year of construction2005 Mounted on wheelscheck Floor space0,55x0,55 m Total height1,80 m Weight60 kg Extra SpecificationsVolume 4,1 l, pressure 7 bar, allowable temperature +2°C/+30°CMiscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X469 MakeMillipore LocationBarneveld TypeQuick Scale Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter Filtercheck MaterialGlass, Stainless steel 1.4552 With jacketcheck General No.QS100-1402 Year of construction2021 Mounted on wheelscheck Floor space0,55x0,55 m Total height1,75 m Weight39,2 kg Extra SpecificationsVolume 4,32l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1,with pressure gauge.Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.