cnc mill used for sale

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm L 25 mm -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg

X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table

Key data: 310 mm, 170 mm, 340 mm

Built in 1990, with 3-axis digital display. Spindle holder ISO 40, travels 310 x 170 x 340 mm, 16 spindle speeds from 40 - 2000 rpm, 16 feeds from 9 - 450 mm/min, motor power 1.2/1.8 kW, weight 700 kg. The machine is in good condition.

Tool magazine, tool holder, tool mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg

Tool holder, tool magazine, tool mount, milling mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Counter support, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Dovetail: 144 x 184 mm, 30 mm high -Drawing with the photos -Dimensions: 270/130/H195 mm -Weight: 12 kg

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 88 kg

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 90 kg

Tool holder, milling tool holder -Quantity: 20x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 70 kg

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With thrust ring, brushes and brake wedge for the inrun bearing Obviously hasn't been used much so far. Year of construction unknown The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Tool holder, milling tool holder -Number: 17x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 68 kg

Tool holder, milling tool holder -Number: 17x SK50 recording -Photos: MK -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 68 kg

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg

end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg

end mill, end mill, milling cutter -Outer diameter: 80 mm -Radius: 4 mm -Teeth: 6 -Weight: 1.6 kg

End mill, end mill, milling cutter, indexable inserts -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg

Milling tool holder, attachment milling arbor -Recording: PK50 -Cutter: Ø 32 mm -Weight: 7 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg

Brand: Mateu I Solé, model: B-10, cutting chamber: 450x280 mm, stepped rotor, motor: 7.5 KW (10 hp). With electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

end mill, end mill, milling cutter -Outer diameter: 200/H60 mm -Teeth: 12 -Quantity: 1 available Price: per piece -Weight: 9 kg

end mill, end mill, milling cutter -Outer diameter: 125/H60 mm -Teeth: 8 -Weight: 3 kg

Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 4.6 kg

Tool holder, milling tool holder -Number: 4x SK50 recording -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg

Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640

Tool holder, milling tool holder -Recording: SK40 -Inner diameter: 25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Weight: 3.5 kg

Shell end mills, shell mills, milling cutters -Outer diameter: 50 mm -Height: 42 mm -Inner diameter: 22 mm -Teeth: 6 -Price: complete -Number: 5 pieces -Weight: 2.5 kg