cnc mill used for sale

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

with 2 pcs. roller conveyor Auction-ID: A7-45452-19

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant

CNC Week Homag; 6.00 m in the X-axis; incl. rich accessories such as milling cutters; saws; swivel tools; etc. Then there are some controlled vices; many material suckers / suction pads. The main spindle was renewed once. There was also a software update. Stands unused for about 6 months. Auction-ID: A7-45983-6

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-114

CNC LATHE Inv. No. 12.710C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG16AC Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-113

Complete mixed lot of CNC tooling from industrial use. Sale includes all tools shown in the pictures. Assorted tool holders, boring bars, cutters, drills, indexable tooling and accessories. Used condition, sold as one package only. Ideal for resale, spare stock, or workshop use Auction-ID: A7-46285-2

Doosan (Daewoo) Lynx 220 CNC lathe – a compact and very popular turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 (designation on nameplate: Lynx 220…) • Control system: FANUC (panel marked FANUC Series” visible in the photos) • Year of manufacture (from nameplate): 2005/10 • Power supply (from nameplate): AC 200/220 V, 3~, 50/60 Hz • Rated power (from nameplate): 11.0 kW • Max. load (from nameplate): 23.68 kVA • Full load current (from nameplate): 92.1 A • Short-circuit / interrupting current (from nameplate): 17,000 A • Serial number (from nameplate): 1422006821 (read from the photo) Equipment / accessories visible in the photos • SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46 ...

Control: Siemens Sinumerik 805 Grinding length: 800 mm Grinding width: 300 mm Workpiece height: 300 mm Table load: 800 kg Grinding wheel diameter: 400 mm Grinding wheel width max: 50 mm Operating voltage: 380 V Table dimensions: 800 x 300 mm Total power: 20 kVA Auction-ID: A7-46304-148

Visible features: • ELCON 5 control • enclosed working area • 3-jaw chuck • coolant nozzle / hose • operator panel • tailstock / support unit visible Condition: Used machine, sold as seen / as shown in the photos. Inspection possible by arrangement Auction-ID: A7-46285-8

Complete mixed lot of used CNC tooling and tool holders from industrial use. Sale includes all tools shown in the pictures. Assorted taper tool holders, drill holders, arbors, milling tools, reamers, indexable tooling and accessories. Used condition, sold as one package only. Ideal for resale, spare stock, or workshop use Auction-ID: A7-46285-3

: Doosan (Daewoo) Lynx 220 CNC lathe – a proven, compact turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 • Control system: FANUC • Serial number: L220122651 (read from the photo) • Year of manufacture: 2006/07 • Power supply: AC 200/220 V, 3~, PE, 50/60 Hz • Rated power: 11.0 kW • Max. load: 26.68 kVA • Full load current: 62.13 A • Short-circuit / interrupting current: 17,000 A Important note The SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46285-12

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

Other data and price on inquiry. Do you need another machine or the whole arrangement? We have more than 1000 other used machines on stock. Please send us an email with your need.

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Material: Normal steel Fan percussion More information and price on request The machine is extensively overhauled and then is as new as new.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Bridge 84in x 26in/22in dia two roll mill, manual nip adjustment, Cored rolls with rotary joints fitted, Bronze bush type sleeve bearings, with Hagglunds hydraulic drives fitted to each roll, 160kW motor with pump to each roll for variable roll speed/friction. Drives fitted in 1988 (Marathon type). Complete with controls etc and in good working condition. Fabricated bedplate.

- with lateral Kappsaege

No.: 12690 Year of construction: 1987 top condition Head with jacket Hopper and discharge chute Power: 2.2 kW Off switch available Dimensions: LBM = 300x400x770mm Weight: approx. 45 kg

Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

1 x Meccaniche Moderne 1500mm x 560mm dia two roll mill, Type: DUPLOCOM, Year 1984 but refurbished in 2001 to CE regulations. Peripherally drilled rolls, motorised nip adjustment (2.2kW to each roll), with 37kW, 1450rpm motor fitted to each roll, Friction ratio 1:1.24, Back roll speed 16.1rpm, front roll speed 12.9rpm, 3ph, 380V, 50Hz.

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Type U-1000 1991 year - X/Y/Z 1000x480x380 3-axis digital display Heidenhain Positip

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.

Weibert WJ-F30 Table milling machine 5.5 KW R + L barrel swiveling 3000 to 10000 U/1 Control Panel top Safety rulers WJ 600500

Operating voltage: 400 v Ma.Nr.: 41636 HEIDENHAIN positioning and control TNC 131 / 135 Complete Dokunnetation (operating instructions, technical plans) exists. Errors excepted!

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Used colloid mill with capacity hopper approx. 30 liters. Stainless steel construction.

Used ball mill made by turkish company Remas. Capacity 34,000 liters. Mill inside the rubber, silicon spheres, 90kW engine. 10.68 mill Oroty rev. / Min. Dimensions: 3120mm diameter. length of 5380mm. Dost. 7 pcs.

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.