cnc machine center used for sale

Highlights - CNC FANUC 32i - 6 linear axes - 2 programming channels - 2 electrospindles - C-axis standard for main spindle and sub-spindle - 25 Vehicle positions - 4 radial driven tools for slides 1 - 4 radial driven tools for slides 2 - Machining on the main spindle possible with 2 tools at the same time Technical description I-A1023 GILDEMEISTER SPRINT 20|8 CNC Swiss Automatic Lathe CNC CNC FANUC 32i TECHNICAL DATA MAIN SPINDLE Turning diameter max.: 20 mm Stroke Z1: 60 mm 180 (with option I-C1002) Max. speed: 10,000 rpm Nominal drive power S1: 2.2 kW SUB-SPINDLE Turning diameter max.: 20 mm Stroke X2: 220 mm Stroke Z2: 170 mm Max. speed: 10,000 rpm Nominal drive power S1: 1.5 kW CNC-CONTROLLED AXES Rapid traverse speed: 32 m/min Max. acceleration: 5 m/s2 Feed force (S1) axes Z1, Z2, X1, X2: 150 daN Feed force (S1) axis Y1: 370 daN Feed force  ...

Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...

CNC TURNING CENTER (no tailstock) VDF Boehringer — Model VDF 250 Cm MACHINE IDENTITY Machine type CNC Turning Center (Chuck-type lathe) Manufacturer VDF Boehringer GmbH & Co. KG Model VDF 250 Cm Serial No. 1114.3705-24 Year of manufacture 1997 Control system Siemens Sinumerik 840C Condition Used — fully functional WORKING AREA Swing diameter over bed 550 mm Swing diameter over cross slide 480 mm Maximum turning length 1,000 mm Tailstock None SPINDLE Spindle head size 8 DIN 55026 Spindle bore 103 mm Max. spindle speed 4,500 rpm AXES X-axis travel 405 mm Z-axis travel 1,099 mm Rapid traverse 10 m/min Feed speed range 0.1 – 10,000 mm/min C-axis Yes — full workhead rotation TOOL TURRET Number of positions 12 Tool holder standard VDI 50 DIN 69880 Live / driven tools Yes Driven tool speed Up to 2,500 rpm Driven tool power 5.4 kW Max. driven torque 25  ...

The 2004 Leistritz RT 400 CCA is a high-precision CNC thread rolling machine. Unlike the laser cutter we discussed previously, this is a "chipless" forming machine used to create high-strength threads, splines, or serrations on cylindrical workpieces by pressing them between rotating dies. Find more here - / Contact us at -

CPU315-2DP 321-7BH00-0AB0 321-1BL00-0AA0 322-1BL00-0AA0 353-1AH01-0AE0 353-1AH01-0AE0 331-7KB02-0AB0

Control Fanuc Spindle diameter ... 100mm Axis X ... 1270mm Axis Y ... 910mm Spindle speed ... 0-2000 rpm. Axis W ... 730mm Axis Z ... 900mm ISO 50 Max. table load ... 3000kg Clamping table surface ... 1000x1120mm Machine weight ... 11500kg L x W x H ... 5000 x 3000 x 2800mm Main engine power... 18.5kW Total power requirement ... 31kVA More info on request. The machine is ready for the viewings.

5-axis cnc machining center Type: Mill 800 high speed Manufacturer: Chiron Year: 2006 Control: Siemens Sinumerik 840 D Hours: 16738 X: 800 mm Y: 630 mm Z: 550 mm A: +/- 110° C: 360° Chip conveyor Tool probe Machine in good condition, fully functional, under power Find more here - / Contact us at -

Key data: 125 t, 3020 mm, 3050 mm

Dener XF 30125 - Hydraulic CNC Press Brake - Control unit (swivel): ESA S 640 CNC 15" 2D graphic screen / touchscreen - Hydraulic brake brake valve with CE safety signals - MCS PLC Safety PLC - Laser safety system - X-axis backgauge: 500 mm (manually adjustable) - Clamping of the upper tool: L = 150 mm (Promecam) - Upper tool: Eurostamp 1260 / Standard (835 & 805 mm, divided into 595 & 210 mm) - Lower die holder: standard width (Promecam) - Lower die: Eurostamp 2067 / Standard (835 & 805 mm, divided into 100 mm left, 395 mm, 210 mm & 100 mm right) - CNC adjustable motorized crowning (V-axis) - 2 front supports, manually adjustable in height and lateral position - Switch-on time: 1184 h - Processing time: 673 h - Year of construction 2023 Technical data - Pressure: 125 t - Bending length: 3020 mm - Stand width: 3050 mm - Number of axes: 3 - Oil filling: 200 l - To ...

CNC vertical machining center Type: DEM 4000 Manufacturer: Doosan Year: 2020 Control: Fanuc i Series X: 550 mm Y: 400 mm Z: 450 mm Spindle taper: BT40 Max spindle speed: 8000 rpm Table: 650 x 400 mm Max table load: 400 kg Machine weight: 3100 kg Tool probe Renishaw Work probe Chip conveyor In January, a general overhaul of the spindle plus the table of all axes was carried out. The machine is fully equipped Vices-clamping from the company LANG Boring heads, a large number of carbide drills, cutters and tools. Clamping milling magnet Grip cutter plus a powerful table Top-notch hydraulic-collet clamping of which there are about 50pcs Plus top-notch gauges and measuring devices The machine also includes a snow compressor with a refrigerator. Machine in good condition, fully functional, under power Find more here - / Contact us at -

In order to submit a bid on this lot, a deposit of €1300.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-9

CNC machining center Type: Integrex J-200 S Manufacturer: Mazak Year: 2015 Control: Mazatrol SmoothG 5-axis turning + milling in one clamping X: 450 mm Y: 200 mm Z: 960 mm B axis C axis Main spindle speed: 5000 rpm Subspindle: allows complete machining from both sides without re-clamping Max working diameter: 500 mm Max working length: 910 mm Tool tray: 36 positions Capto C6 / PSC63 Internal cooling A large number of accessories (jaws, clamps, holders, etc.) Part of the sale is a functional post-processor for SolidCAM Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...

CNC vertical machining center Type: VMC 1300 S Manufacturer: Richmond Year: 2006 Control: Fanuc Series 21i-MB Hours: 28000 X: 1300 mm Y: 700 mm Z: 700 mm Table: 1400 x 610 mm Machine weight: 7200 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

CONTROLS   CNC controls MAZATROL 640 T NEXUS WORKING RANGE TURNING   turning diameter (max): 380 mm   bar diameter (max): 65 mm   worpiece length max.: 575 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 26 kW COUNTER SPINDLE   spindle revolutions (max): 6000 /min   drive power: 11 kW X/Z SLIDE   Z-axis travel: 575 mm   X-axis travel: 230 mm   Y-axis travel: 585 mm   number of tool positions (total): 12   - rotation speeds (max): 4500 /min   - drive power: 5.5 kW Additional options• Kitagawa BB-08 3-jaw chuck• Kitagawa B-206 3-jaw chuck• Parts catcher• Interface for bar feeder• Tool holder package, including driven holders• Coolant pump• Chip conveyor

CNC vertical machining center Type: VM-740S Manufacturer: NEWAY Year: 2020 Control: Fanuc 0i-MF Hours: 3638 X: 650 mm Y: 420 mm Z: 500 mm Spindle taper: BT40 Max spindle speed: 10000 rpm Tool magazine: 20 positions Table size: 750 × 420 mm Max table load: 350 kg Power supply: 400 V Frequency: 50 Hz Input power: 20 kVA Nominal current: 30 A Weight: 4,000 kg Equipment: Renishaw probes BT40 tool holders 48 pc Cooling Lubrication Chip conveyor Other accessories Vices are not part of the sale Machine in good condition, fully functional, under power Find more here - / Contact us at -

Connected load: 10kW, control: FANUC Series 0-T, machine type: slant bed lathe. With transformer, hydraulic unit and electrical cabinet with main switch. An on-site inspection is possible.

Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

TSUGAMI B0206E-II Sliding Headstock CNC Lathe TECHNICAL FEATURES: Year: 2014 NC Type: FANUC series 32i-B Number of axes: 6 X1 Axis Fast Feed Speed: 24000 [mm/min] X2 Axis Fast Forward Speed: 24000 [mm/min] Z1 axis fast feed speed: 32000 [mm/min] Z2 axis fast feed speed: 32000 [mm/min] Y1 Axis Fast Feed Speed: 15000 [mm/min] Y2 Axis Fast Feed Speed: 15000 [mm/min] Maximum diameter in bar: 20 [mm] Minimum speed. Spindle: 200 [rpm] Maximum speed Spindle: 10000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Minimum speed. Spindle: 200 [RPM] Maximum speed Spindle: 12000 [rpm] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 2.2 [kW] Number of end device positions: 8 Number of comb positions 1 : 5 Number of motorized comb stations 1 : 3 Comb Turning Tool Speed 1: 8000 [rpm] Number of counter-operation positions: 8 Number of counte ...

Key data: 100 t, 3000 mm

8 Axis machine with tooling

Auction-ID: A7-45927-1

This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details.

This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine.

This 4-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details.

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

CNC lathe Type: Lynx 220 Manufacturer: Doosan Year: 2012 Control: Fanuc i Series Spindle hours: 1743 Max. turning diameter: 320 mm X: 175 mm Z: 330 mm Spindle speed: 5000 rpm Turret: 12 positions Tailstock Chip conveyor Tool probe Part catcher Machine in good condition, fully functional, under power Find more here - / Contact us at -

5-axis CNC machining center Type: DMU 50 eco Manufacturer: DMG Year: 2009 Control: Siemens Sinumerik 810D+ShopMill X: 500 mm Y: 450 mm Z: 400 mm B: +110°/-5° C: 360° Max spindle speed: 8.000 rpm Spindle taper: SK40 Tool magazine: 12 positions Probe DMG TS 649 Machine in good condition, fully functional, under power Find more here - / Contact us at -

This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details.

This 5-axis MORBIDELLI Author X5 was manufactured in 2007. It features a powerful spindle that was completely overhauled in 2022, ensuring optimal performance. The machine includes a circular carousel tool changer and comes with multiple vacuum pods for workpiece holding. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details.

CNC vertical machining center Type: VF-2 Manufacturer: Haas Year: 2014 Control: Haas X: 762 mm Y: 406 mm Z: 508 mm Table: 914 × 356 mm Max.table load: 680 kg Spindle speed: 10000 rpm Tool magazine: 24 positions Spindle taper: SK 40 4th axis HRT 210 Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: TCH 500 Prime/80 Manufacturer: Tajmac-ZPS Year: 2006 Control: Siemens Sinumerik 840D Turning diameter: 550 mm Turning length: 1000 mm Spindle bore: 80 mm X: 360 mm Z: 1100 mm VDI 50 rev.head: 12 positions Spindle speed: 3200 rpm Driven tools Tailstock Machine weight: 9500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: SV 1350 Manufacturer: Akira-Seiki Year: 2012 Control: Mitsubishi M700 Hours: 22858 X: 1350 mm Y: 640 mm Z: 750 mm Table size: 1500 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Internal cooling Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: SV 1150 Manufacturer: Akira-Seiki Year: 2011 Control: Mitsubishi M700 Hours: 18427 X: 1150 mm Y: 640 mm Z: 750 mm Table size: 1300 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Tool and work probe Machine in good condition, fully functional, under power Find more here - / Contact us at -

A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026.

CNC nesting machining centre manufactured in 2021. This FORMAT4 Profit H80 21.31 features a working area of 3090 x 2100 mm and a powerful 10 kW spindle with speeds up to 24,000 rpm. It includes an 8-spindle drilling head and a 15-position tool changer. If you are looking to get high-quality nesting capabilities, consider the FORMAT4 Profit H80 21.31 machine we have for sale. Contact us for further details.

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

CNC tube banding machine Type: ELECT 52 Manufacturer: BLM Year: 2016 Fully electric dual-direction tube bending machine (9-axis) Control: Siemens SIMOTION Cycle hour counter: 7344 Number of parts produced: 5143 Mandrel rod set length: 4.2 m + extension of usable length to 4.5 m 3D visual programming system (VGP3D) – software for 3D graphical programming with feasibility analysis and bending process optimization B-RIGHT – automatic springback and elongation correction BOOSTER 20 – pushing booster with 2000 kg force Machine toolings: bending tools for tubes: Ø17.2 (r-68.6 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø21.3 (r-70.7 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters Ø26.9 (r-83.5 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø33.7 (r-107 mm) fixed  ...

CNC lathe Type: Style 510 Manufacturer: Style Year: 2021 Control: STYLE 2021 Turning Edition Swing over bed: 510 mm Swing over cross slide: 300 mm Center distance: 1350 mm Bed width: 330 mm Main motor power (S6): 11 kW Spindle bore: 80 mm Max. weight between centers: 750 kg Maximum spindle speed: 2500 rpm Spindle nose: D1-8 X and Z Axes Rapid traverse: 8 m/min Feed rate range: 2 m/min Tailstock Quill diameter: 80 mm Quill travel: 160 mm Quill taper: MT5 (Morse Taper 5) Turret: 8-position Machine in very good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: 2016 Control: Fanuc X: 1270 mm Y: 635 mm Z: 610 mm Spindle taper: SK40 Table: 1420 x 610 mm Max table load: 1000 kg New spindle in 2025 4-axis GSA with tailstock Internal cooling 20 bar Machine in good condition, fully functional, under power Find more here - / Contact us at -

A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible.

turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mixed lot of solid carbide twist drills, mixed designs. Contents: Quantity: approx. 30 pieces Condition: mixed, partly used Scope of delivery: Complete item as shown Material: solid carbide (solid carbide) Design: Twist drill Partly coated, partly bare Different diameters (including approx. Ø 6–9 mm, visible according to the labeling) Different lengths Partly in plastic sleeves Auction-ID: A7-46417-41

This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details.

This 3-axis Weeke Venture 1M CNC Wood Machining Centre was manufactured in 2008. It features a horizontal drilling unit with 6 individually programmable spindles and a grooving saw aggregate for X-Y direction processing. The machine is equipped with an automatic tool change spindle and a rear automatic tool changer with 6 positions. If you are looking to get high-quality wood machining capabilities, consider the Weeke Venture 1M machine we have for sale. Contact us for further details.

Tube bending machine Type: ELECT 52 Manufacturer: BLM Year: 2020 bent only 5,000 parts Control: Simens Simotion CNC 9 axis Max bending diameter: 52 mm Technical data see pictures With following tools-sets: D20 tube CLR40 + variable bend D25 tube CLR67,5 + variable bend D40 tube CLR40 25x25 tube CLR75 Extended version – it can bend up to 6m long tubes Condition of new machine, under power Find more here - / Contact us at -

CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

2 x CNC lathe Type: KIT 450 Manufacturer: HYUNDAI-KIA Year: 2006 Control: Fanuc Series 0i-TC X: 400 mm Z: 250 mm Max spindle speed: 6000 rpm Machine weight: 2700 kg Chip conveyor Tool holders In good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Boschert Model: Profi Bend 28/100 Year of Manufacture: 2012 Type of Machine : CNC die bending press Technical Specifications - Press force: 28 tonnes - Bending length: 1000 mm - Maximum sheet thickness: approx. 10 mm - CNC control: Cybelec ModEva Pac / CybTouch 15 - Tool clamping system: WILA mechanical - Backgauge: 2 lateral height-adjustable depth stops with 2 stop faces each - Backgauge (Y-axis): programmable, 99 programmes up to 30 steps each - Bending angle repeatability: 0.02 mm - Handwheel for bending angle adjustment Electrical Data - Power supply: 3 x 400 V / 50 Hz - Connected load: 5.5 kVA - Control voltage: 24 V - Required fuse: 3 x 16 A Machine Condition The machine was used exclusively in a research and testing environment throughout its life, resulting in very few operating hours. Find more here - / Contact us at -